Het is een HP Probook 4510s.
System:
Kernel: 5.19.0-32-generic arch: x86_64 bits: 64 compiler: N/A Desktop: GNOME
v: 42.5 Distro: Ubuntu 22.04.2 LTS (Jammy Jellyfish)
Machine:
Type: Laptop System: Hewlett-Packard product: HP ProBook 4510s v: F.0F
serial: <superuser required>
Mobo: Hewlett-Packard model: 3072 v: KBC Version 24.0D
serial: <superuser required> BIOS: Hewlett-Packard v: 68PZI Ver. F.0F
date: 10/20/2009
Battery:
ID-1: BAT0 charge: 49.9 Wh (103.5%) condition: 48.2/47.5 Wh (101.4%)
volts: 12.5 min: 10.8 model: Hewlett-Packard Primary status: full
CPU:
Info: dual core model: Intel Core2 Duo T5870 bits: 64 type: MCP
arch: Core2 Merom rev: D cache: L1: 128 KiB L2: 2 MiB
Speed (MHz): avg: 798 min/max: 800/2001 boost: enabled cores: 1: 798
2: 798 bogomips: 7980
Flags: ht lm nx pae sse sse2 sse3 ssse3
Graphics:
Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Hewlett-Packard
driver: i915 v: kernel arch: Gen-5 bus-ID: 00:02.0
Device-2: Acer HP Webcam [2 MP Fixed] type: USB driver: uvcvideo
bus-ID: 1-5:3
Display: x11 server: X.Org v: 1.21.1.3 with: Xwayland v: 22.1.1 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915
resolution: 1366x768~60Hz
API: OpenGL Message: Unable to show GL data. Required tool glxinfo
missing.
Audio:
Device-1: Intel 82801I HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
API: ALSA v: k5.19.0-32-generic status: kernel-api
Server-1: PipeWire v: 0.3.48 status: off
Server-2: PulseAudio v: 15.99.1 status: active
Network:
Device-1: Broadcom BCM4312 802.11b/g LP-PHY vendor: Hewlett-Packard
driver: b43-pci-bridge v: N/A bus-ID: 02:00.0
Device-2: Marvell 88E8072 PCI-E Gigabit Ethernet vendor: Hewlett-Packard
driver: sky2 v: 1.30 port: 2000 bus-ID: 85:00.0
IF: ens5 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: HP Broadcom 2070 Bluetooth Combo type: USB driver: btusb v: 0.8
bus-ID: 3-1:2
Report: hciconfig ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 1.2
lmp-v: 2.1
Drives:
Local Storage: total: 262.18 GiB used: 15.6 MiB (0.0%)
ID-1: /dev/sda vendor: Western Digital model: WD2500BEKT-60F3T1
size: 232.89 GiB
ID-2: /dev/sdb type: USB vendor: Intenso model: Slim Line size: 29.3 GiB
Partition:
ID-1: / size: 1.42 GiB used: 254.7 MiB (17.5%) fs: overlay source: ERR-102
ID-2: /var/log size: 24.15 GiB used: 15.6 MiB (0.1%) fs: ext4
dev: /dev/sdb4
Swap:
Alert: No swap data was found.
Sensors:
Src: /sys System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 246 Uptime: 52m Memory: 2.84 GiB used: 2.24 GiB (79.0%)
Init: systemd target: graphical (5) Compilers: N/A Packages: 1856
Shell: Bash v: 5.1.16 inxi: 3.3.26
In GParted zie ik het probleem waarschijnlijk: De EfI system partition FAT32 geeft een waarschuwing: Unable to read the contents of this file system!
Because of this some operations may be unavailable.
The cause might be a missing software package.
The following list of software packages is required for fat32 file system support: dosfstools, mtools.
Hoe kan ik dit herstellen?
het lukt dus niet om van harddisk op te starten, dan gaat hij naar het netwerk en daar staat niets. Alleen op de harddisk heb ik een oprating system. Het is een enkel OS. Alleen Ubuntu 22.04. Het gaat om een laptop uit 2009, oorspronkelijk geleverd met windows7.
Boot repair werkt ook niet.
Ik heb deze foutmelding gegoogeld en kwam hierop terecht:
https://askubuntu.com/questions/1452518/ubuntu-22-04-1-cant-load-after-fresh-install-error-at-boot-and-partition-error.
3 maanden terug en geen antwoord. Zo ziet de GParted bij mij er ook uit.