Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: upgrade van 7.10 naar 8.04  (gelezen 882 keer)

upgrade van 7.10 naar 8.04
« Gepost op: 2008/04/27, 20:35:22 »
Ik heb via de updatemanager de upgrade gedaan. Dat lukte, na de opstart krijg ik echter een vreemd bureaublad. Dat is veel groter dan mijn scherm. De achtergrond met de reiger past im mijn scherm, maar rechts en onder  kan ik met de muis meer blad zien met de standaard lichtbruine kleur. Ik kan ook geen paneel aan de rechter- of onderkant krijgen. Als ik bijv met de muis tegen mijn rechterkant druk schuift mijn blad een eind naar links.
Ik heb gekeken of er iets met de schermresolutie fout is via Systeem \Voorkeuren\schermresolutie, maar als ik dat aanklik krijg ik de volgende foutmelding:
The Xserver does not support the XRandRextension. Runtime resolution changes to the display size are not available.
Heeft iemand hiervoor een oplossing?

Bertha

Offline tabasco

  • Lid
upgrade van 7.10 naar 8.04
« Reactie #1 Gepost op: 2008/04/27, 21:27:38 »
Het lijkt op een te grote virtuele schermruimte.
Kun je de inhoud van je xorg.conf hier eens plaatsen?
Dat kun je als volgt doen:
ALT-F2
gedit /etc/X11/xorg.conf
CTRL-A (alles selecteren)
CTRL-C (kopieren)
(en hier in het forum plakken) CTRL-V

upgrade van 7.10 naar 8.04
« Reactie #2 Gepost op: 2008/04/28, 16:08:05 »
Citaat van: tabasco
Het lijkt op een te grote virtuele schermruimte.
Kun je de inhoud van je xorg.conf hier eens plaatsen?
Dat kun je als volgt doen:
ALT-F2
gedit /etc/X11/xorg.conf
CTRL-A (alles selecteren)
CTRL-C (kopieren)
(en hier in het forum plakken) CTRL-V
=================================================
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        Fontpath   "/usr/share/fonts/X11/75dpi/:unscaled"   
        Fontpath   "/usr/share/fonts/X11/100dpi/:unscaled"   

        Fontpath   "/usr/share/fonts/X11/misc"
   Fontpath   "/usr/share/fonts/X11/cyrillic"
       
   Fontpath   "/usr/share/fonts/X11/Type1"
        Fontpath   "/usr/share/fonts/X11/100dpi"        
        Fontpath   "/usr/share/fonts/X11/75dpi"   
       
   
   # path to defoma fonts
   Fontpath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load      "bitmap"
   Load      "ddc"
   Load      "extmod"
   Load      "freetype"
   Load      "int10"
   Load      "vbe"
   Load      "glx"
   Load      "GLcore"
   Load      "v4l"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "radeon x1600"
   Boardname   "ati"
   Busid      "PCI:3:0:0"
   Driver      "fglrx"
   Screen   0
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Vendorname   "Plug 'n' Play"
   Modelname   "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
   Gamma   1.0
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "radeon x1600"
   Monitor      "Generic Monitor"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Virtual   1792   1344
      Modes      "1280x1024@60"   "1280x960@75"   "1280x960@60"   "1400x1050@60"   "1280x1024@75"   "1400x1050@75"   "1152x864@75"   "1600x1200@65"   "1024x768@60"   "1600x1200@60"   "1024x768@70"   "1792x1344@60"   "1024x768@75"   "832x624@75"   "800x600@60"   "800x600@75"   "800x600@72"   "800x600@56"   "640x480@75"   "640x480@72"   "640x480@60"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
  screen 0 "Default Screen" 0 0
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   Inputdevice   "stylus"   "SendCoreEvents"
   Inputdevice   "cursor"   "SendCoreEvents"
   Inputdevice   "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection
Section "Extensions"
   Option      "Composite"   "0"
EndSection
Section "device" #  
   Identifier   "device1"
   Boardname   "VESA driver (generic)"
   Busid      "PCI:3:0:1"
   Driver      "vesa"
   Screen   0
EndSection
Section "screen" #  
   Identifier   "screen1"
   Device      "device1"
   Defaultdepth   24
   Monitor      "monitor1"
   SubSection "Display"
      Depth   24
      Modes      "640x480@60"   "640x480@72"   "640x480@75"   "800x600@56"   "800x600@72"   "800x600@75"   "800x600@60"   "832x624@75"   "1024x768@75"   "1024x768@70"   "1024x768@60"   "1152x864@75"   "1280x1024@75"   "1280x960@60"   "1280x1024@60"   "1280x960@75"   "1400x1050@60"   "1400x1050@75"   "1600x1200@65"   "1600x1200@60"   "1792x1344@60"
   EndSubSection
EndSection
Section "monitor" #  
   Identifier   "monitor1"
   Vendorname   "Plug 'n' Play"
   Modelname   "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
   Gamma   1.0
EndSection
Section "ServerFlags"
EndSection

=====================================

Mijn schermresolutie is 1280x1024. Ik zie wel dat er veel hogere instaan!
Ik hoop dat je er iets mee kunt.

Bertha

Offline Mij

  • Lid
upgrade van 7.10 naar 8.04
« Reactie #3 Gepost op: 2008/04/28, 16:35:58 »
probeer eens
sudo dpkg-reconfigure xserver-xorg

upgrade van 7.10 naar 8.04
« Reactie #4 Gepost op: 2008/04/28, 19:03:24 »
Citaat van: doan
probeer eens
sudo dpkg-reconfigure xserver-xorg
Heb ik gedaan en nu is er wel iets veranderd, de achtergrond is nu wel in de schermgrootte, maar de resolutie moet steeds fout zijn, want alles is nu horizontaal gezien ingedrukt. Ook de letters zien er beroerd uit. En nog steeds kan ik niet in de schermresolutie komen! Ik blijf de foutmelding krijgen.

Iemand nog ideeën?

Bertha

upgrade van 7.10 naar 8.04
« Reactie #5 Gepost op: 2008/04/28, 19:49:56 »
Citaat van: gijsbertha
Citaat van: doan
probeer eens
sudo dpkg-reconfigure xserver-xorg
Heb ik gedaan en nu is er wel iets veranderd, de achtergrond is nu wel in de schermgrootte, maar de resolutie moet steeds fout zijn, want alles is nu horizontaal gezien ingedrukt. Ook de letters zien er beroerd uit. En nog steeds kan ik niet in de schermresolutie komen! Ik blijf de foutmelding krijgen.

Iemand nog ideeën?

Bertha
Ik wil er nog iets aan toevoegen.
De restricted driver voor ATI werkt niet.
Hardware testing geeft aan dat de videokaart ATI X1600 niet werkt met de driver fglrx!
In de terminal heb ik de opdracht xrandr -s 1280x1024 geprobeerd, maar dan krijg ik als antwoord dat  die mode niet available is.

Offline tabasco

  • Lid
upgrade van 7.10 naar 8.04
« Reactie #6 Gepost op: 2008/04/28, 19:57:23 »
Citaat van: xorg.conf gijsbertha
Section "Screen"
    Identifier    "Default Screen"
    Device        "radeon x1600"
    Monitor        "Generic Monitor"
    Defaultdepth    24
    SubSection "Display"
        Depth    24
        Virtual    1792    1344
        Modes        "1280x1024@60"    "1280x960@75"    "1280x960@60"    "1400x1050@60"    "1280x1024@75"    "1400x1050@75"    "1152x864@75"    "1600x1200@65"    "1024x768@60"    "1600x1200@60"    "1024x768@70"    "1792x1344@60"    "1024x768@75"    "832x624@75"    "800x600@60"    "800x600@75"    "800x600@72"    "800x600@56"    "640x480@75"    "640x480@72"    "640x480@60"
    EndSubSection
EndSection
Hier zie je Virtual    1792    1344, deze waardes had je kunnen veranderen voor 1280 en 1024.
Nu zal je xorg.conf wel weer anders zijn...?

upgrade van 7.10 naar 8.04
« Reactie #7 Gepost op: 2008/04/28, 20:31:49 »
Citaat van: tabasco
Citaat van: xorg.conf gijsbertha
Section "Screen"
    Identifier    "Default Screen"
    Device        "radeon x1600"
    Monitor        "Generic Monitor"
    Defaultdepth    24
    SubSection "Display"
        Depth    24
        Virtual    1792    1344
        Modes        "1280x1024@60"    "1280x960@75"    "1280x960@60"    "1400x1050@60"    "1280x1024@75"    "1400x1050@75"    "1152x864@75"    "1600x1200@65"    "1024x768@60"    "1600x1200@60"    "1024x768@70"    "1792x1344@60"    "1024x768@75"    "832x624@75"    "800x600@60"    "800x600@75"    "800x600@72"    "800x600@56"    "640x480@75"    "640x480@72"    "640x480@60"
    EndSubSection
EndSection
Hier zie je Virtual    1792    1344, deze waardes had je kunnen veranderen voor 1280 en 1024.
Nu zal je xorg.conf wel weer anders zijn...?
Inmiddels is het voor elkaar. Ik heb via recovery mode de Xserver laten herstellen. Onder Gutsy  moest ik xserver-glx installeren en het blijkt dat je die onder Hardy weer moet verwijderen. Na wat heen en weer geklooi en het weer aanzetten van de restricted driver, is het nu helemaal goed. Hoewel...
een ding is noch irritant: het opstart en afsluitscherm ziet er niet uit, alle kleuren van de regenboog en half over het scherm, doordat het ook een te groot formaat heeft. Misschien komt dat nog vanzelf goed of heeft iemand van jullie een idee?

Bertha

upgrade van 7.10 naar 8.04
« Reactie #8 Gepost op: 2008/04/28, 21:09:34 »
Kijk eens in deze informatie Misschien helpt het...
Omwille van de besparingen hebben ze het licht aan het eind van de tunnel ook uitgedaan...