Beryl loopt vast?!

[Martin]

Hallo,
Als ik beryl opstart, kan ik nog wat vensters laten wapperen maar daarna loopt mijn systeem finaal vast, en moet ik resetten.

Ik heb een AMD Athlon 64 3500+ 2.2ghz
2gb ram
Nvidia Geforce 6200TC

Ik zie veel mensen Beryl draaien met veel mindere spec's, maar als ik beryl draai loopt mijn hele systeem vast!!
Weet iemand hoe dat komt of ligt dat gewoon aan Edgy?

[Soul-Sing]

Hallo,
Als ik beryl opstart, kan ik nog wat vensters laten wapperen maar daarna loopt mijn systeem finaal vast, en moet ik resetten.

Ik heb een AMD Athlon 64 3500+ 2.2ghz
2gb ram
Nvidia Geforce 6200TC

Ik zie veel mensen Beryl draaien met veel mindere spec's, maar als ik beryl draai loopt mijn hele systeem vast!!
Weet iemand hoe dat komt of ligt dat gewoon aan Edgy?

xorg conf. even posten hier. gedit /etc/X11/xorg.conf

[Martin]

Code: [Selecteer]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "NVIDIA Corporation NV44 [GeForce 6200 TurboCache]"
Driver "nvidia"
BusID "PCI:4:0:0"
VideoRam 102400
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV44 [GeForce 6200 TurboCache]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSectionIk had de Nvidia driver al geinstaleerd

[Soul-Sing]

Plaats de volgende regel in de "Screen"sectie, onder DefaultDepth:
    Option         "AddARGBGLXVisuals" "True"

Voorbeeld zoals ik het heb:
Code:

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV43 [GeForce 6600 GT]"
    Monitor        "B101920"
    DefaultDepth    24
    Option         "AddARGBGLXVisuals" "True"

dan reboot.

draadje johanvd

extra toevoegingen

:
Als je nog extra wil tweaken:
Met triple-buffering krijg je soepeler beeld, al kost het wel meer rekenkracht.
Als je wil kan je ook nog verborgen instellingen in nvidia-settings zichtbaar maken, waaronder overclocken tongue
Voorbeeld:
Code:

Section "Device"
    Identifier     "NVIDIA Corporation NV43 [GeForce 6600 GT]"
    Driver         "nvidia"
    Option         "NoLogo"
    Option       "Coolbits"   "1"  ### enables complete nvidia-settings
    Option         "TripleBuffer" "true"
EndSection