Na het installeren van Kubuntu 9.04 (64bit) kom ik niet verder dan een zwart scherm met 3 regeltjes waarvan het laatste regeltje is Error 2. Ik weet dat dit een fout moet zijn schijf of Biostoestel wat niet herkend wordt in het Bios. Maar voor dat ik ga zitten kl-euhh-rotzooien met het bios of met de menu.lst zou ik toch ondersteuning willen vragen omdat de installatie voorheen met Ubuntu geen problemen heeft gegeven met het Bios en naar mijn weten de menu.lst daarin er anders uitzag dan de menu.lst van Kubuntu, zelf denk ik dat het probleem dus daar zit maar ik weet het niet op te lossen. Mijn menu.lst ziet er als volgt uit:
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 9.04, kernel 2.6.28-11-generic
uuid 1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd ro quiet splash
initrd /boot/initrd.img-2.6.28-11-generic
quiet
title Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid 1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd
kernel /boot/vmlinuz-2.6.28-11-generic root=UUID=1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd ro single
initrd /boot/initrd.img-2.6.28-11-generic
title Ubuntu 9.04, memtest86+
uuid 1cb879a2-25e3-48cf-aa1f-23f6a2e5c6fd
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista (loader)
rootnoverify (hd0,0)
savedefault
chainloader +1
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda2
title Windows Vista (loader)
rootnoverify (hd0,1)
savedefault
chainloader +1
Windows Vista staat op de C: schijf wat volgens mij sda1 is, op D: de documenten e.d van windows dus in mijn opinie sda2, Kubuntu / (root?) op de 2e harde schijf wat volgens mij dus sdb1 is en de /home dus op sdb2. Verder gaat mijn kennis betreffende linux nog niet.
Mijn vraag is dus wat moet ik veranderen om het werkende te krijgen of zijn er andere handelingen die ik moet uitvoeren om de boel weer op de rails te krijgen.