Ondersteuning > Hardware en drivers

benQ scanner 5150C

Pagina's: << < (2/6) > >>

blauwester:

dit met scanner



itobias@tobias:~$ isusb
No command 'isusb' found, did you mean:
 Command 'lsusb' from package 'usbutils' (main)
isusb: command not found
tobias@tobias:~$ tobias@tobias:~$ isusb
tobias@tobias:~$: command not found
tobias@tobias:~$ No command 'isusb' found, did you mean:
No: command not found
tobias@tobias:~$  Command 'lsusb' from package 'usbutils' (main)
bash: syntax error near unexpected token `('
tobias@tobias:~$ isusb: command not found
isusb:: command not found
tobias@tobias:~$ tobias@tobias:~$
tobias@tobias:~$: command not found
tobias@tobias:~$


Gijsbert:

lsusb  is het de eerste letter is een kleine L

blauwester:

tobias@tobias:~$ lsusb
Bus 002 Device 002: ID 046d:c311 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04a5:2137 Acer Peripherals Inc. (now BenQ Corp.) Benq 5150/5250
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
tobias@tobias:~$


Gijsbert:

5150    USB    0x04a5/0x2137    Basic    Calibration algorithm unknown    SnapScan
(1.4)    sane-snapscan
5250    USB    0x04a5/0x2137    Basic    Same hardware as 5150 (?), Calibration algorithm unknown    SnapScan
(1.4)    sane-snapscan

Van deze site http://www.sane-project.org/sane-mfgs.html#BENQ
En op deze wijze moet het werkend te krijgen zijn http://snapscan.sourceforge.net/

blauwester:

zou u mij dit uit willen leggen waar ik dit moet invoeren ik snap er geen ... van

   
SnapScan Backend for SANE

This page provides information on the SnapScan Backend for SANE. This driver is compatible with a wide range of scanners from Afga, Acer, Benq, Vuego, Epson, Guillemot, Hercules and Mitsubishi.

Agfa has released the specs for their older SCSI scanner models. Other vendors have released no specs at all, so it is usually not possible to support all features of every scanner.

We used information provided by many existing web site to try to create an exhaustive page. Thanks to the original authors.

If you're looking for Windows drivers for your scanner please contact the vendors (Agfa, Acer / Benq, Epson) of your scanner directly. Please don't send me emails relating to Windows drivers.
News

    * 11/27/05: Benq 5000 (USB Id 0x04a5, 0x20f8) now working
    * 11/13/05: 16 bit support for Epson 2480 and 3490 added
    * 08/16/05: Added support for Epson 3490/3590
    * 02/09/04: Added support for Epson 2480 / 2580
    * 01/12/04: Added support for Epson 1270

Supported Scanners
Here is a list of scanners that have at least worked at one time in the past. I'd like to complete this list, so if you own one of the scanners below and there's a blank field, please send me a mail .

Benq (formerly known as Acer Peripherals) sell their scanners under a number of names, e.g. Vuego, Scan2Web, ScanPrisa and possibly others. The important part of the model name is the number which you'll find in the table below.

Parallel port scanners by Agfa use an unknown protocol for communication. There are currently no plans to support these scanners.

If you own a SCSI or USB scanner form Acer, Benq or Agfa which is not listed on this page and you're willing to run some tests, please send me a mail.
 
 
Vendor
   
Model
   
Bus
   
USB ID
   
ID String
(after firmware upload)
   
Firmware file
   
Remarks
Acer / Benq    300f    SCSI    -    "ACERSCAN_A4____1"    -    
Acer / Benq    310s    SCSI    -    "FlatbedScanner_2"    -    
Acer / Benq    610s    SCSI    -    "FlatbedScanner_4"    -    
Acer / Benq    620S    SCSI    -    "FlatbedScanner_9"
   -    
Acer / Benq    620ST    SCSI    -    "FlatbedScanner_9"
"FlatbedScanner17"    -    Transparency adapter supported
Acer / Benq    620+    SCSI    -    ?
   -    
Acer / Benq    640s    SCSI    -    "FlatbedScanner18"    -    
Acer / Benq
   310U
   USB
   0x04a5, 0x1a20
   "FlatbedScanner_5"
   u34v110.bin
   
Acer / Benq    320U    USB    0x04a5, 0x2022
   "FlatbedScanner13"
   u34v110.bin    
Acer / Benq    340U    USB    0x04a5, 0x2022
   "FlatbedScanner13"    u34v110.bin
   
Acer / Benq    620U    USB    0x04a5, 0x1a2a
0x04a5, 0x2040    "FlatbedScanner_5"
?
   -
u96v121.bin    
Acer / Benq    620UT    USB    0x04a5, 0x2040    "FlatbedScanner16"    u64v120.bin    Transparency adapter supported
Acer / Benq    640U    USB    0x04a5, 0x2060    "FlatbedScanner20"    u96v121.bin    
Acer / Benq    640UT    USB    ?
   ?
   u64v120.bin    Transparency adapter supported
Acer / Benq    640BU    USB    0x04a5, 0x207e    "FlatbedScanner13"
   u126v043.bin
   
Acer / Benq    640BT
   USB
   0x04a5, 0x20be
   "FlatbedScanner20"
   u190v044.bin
   Transparency adapter supported
Acer / Benq    1240    USB    0x04a5, 0x20c0    "FlatbedScanner19"    u192v074.bin    
Acer / Benq
   3300 / 4300
   USB
   0x04a5, 0x20b0
   "FlatbedScanner23"
   u176v046.bin
   
Acer / Benq    3300 / 4300    USB    0x04a5, 0x20de
   "FlatbedScanner21"
"FlatbedScanner22"
   u222v067.bin
   
Benq
   5000E
   USB
   0x04a5, 0x20fc
   "FlatbedScanner25"
   u252v065.bin
   Working up to 600 DPI
Benq
   5000U
   USB
   0x04a5, 0x20fc
   "FlatbedScanner25"
   20FCV112.bin
   Same as 5000E?
Benq
   5000
   USB
   0x04a5, 0x20f8
   "FlatbedScanner42"
   20F8V116.bin
   Requires sane-backends 1.0.16 or later
Benq    5300    USB    0x04a5, 0x20fe
   "FlatbedScanner24"    u254v042.bin
   Problems with firmware upload reported
Agfa    SnapScan 300    SCSI    -    "SNAPSCAN 300"    -    
Agfa    SnapScan 310s    SCSI    -    "SNAPSCAN 310"    -    
Agfa    SnapScan 600    SCSI    -    "SNAPSCAN 600"    -    
Agfa    SnapScan 1236s    SCSI    -    "SNAPSCAN 1236"    -    
Agfa    SnapScan 1236u    USB    0x06bd, 0x0002    "SNAPSCAN 1236U"    ?
   
Agfa    SnapScan 1212U    USB    0x06bd, 0x0001
0x06bd, 0x2061    "SNAPSCAN 1212U"
"SNAPSCAN 1212U_2"    not necessary(?)
Snapscan 1212U_2.bin    
Remove spaces from firmware filename!
Agfa
   SnapScan e10
   USB
   0x06bd, 0x2093
   "SNAPSCAN e10"
   snape10.bin
   
Agfa    SnapScan e20    USB    0x06bd, 0x2091    "SNAPSCAN e20"    Snapscan e20.bin    Remove spaces from firmware filename!
Agfa    SnapScan e25    USB    0x06bd, 0x2095    "SNAPSCAN e25"    snape25.bin    
Agfa    SnapScan e26    USB    0x06bd, 0x2097    "SNAPSCAN e26"    snape26.bin    Some models don't need firmware upload
Agfa    SnapScan e40    USB    0x06bd, 0x208d    "SNAPSCAN e40"    snape40.bin    
Agfa    SnapScan e42    USB    0x06bd, 0x20ff    "SNAPSCAN e42"    snape42.bin    quality calibration not working as specified
Agfa    SnapScan e50    USB    0x06bd, 0x208f    "SNAPSCAN e50"    snape50.bin    
Agfa    SnapScan e52    USB    0x06bd, 0x20fd    "SNAPSCAN e52"    snape52.bin    quality calibration not working as specified
Agfa
   Arcus 1200
   SCSI
   -
   "Arcus1200"
   -
   
Epson
   Perfection 660
   USB
   0x04b8, 0x0114
   "Perfection 660"
   tail_058.bin
   Some models don't need firmware upload
Epson
   Perfection 1270
   USB
   0x04b8, 0x0120
   "Epson Scanner1"
   esfw3e.bin
   Added in SANE-backends-1.0.15-CVS
Epson
   Perfection 1670
   USB
   0x04b8, 0x011f
   "Epson Scanner"
   esfw30.bin
   Added in SANE-backends-1.0.13
Epson    Perfection 2480
   USB
   0x04b8, 0x0121
   "Epson Scanner1"    esfw41.bin
   Added in SANE-backends-1.0.14-CVS
Needs firmware version > 1.16 (Oct 28 2004) to make transparency adapter work
Epson    Perfection 2580
   USB
   0x04b8, 0x0121
   "Epson Scanner1"    esfw41.bin
   Problems reported, solution pending
Epson
   Perfection 3490
   USB
   0x04b8, 0x0122
   "Epson Scanner2"
   esfw52.bin
   added in SANE-backends-1.0.16-CVS
Epson
   Perfection 3590
   USB
   0x04b8, ???
   "Epson Scanner2"
   ?
   unested, added in SANE-backends-1.0.16-CVS
Guillemot / Hercules    MaxiScan A4 Deluxe    SCSI    
   "FlatbedScanner_9"    -
   Relabeled Acer 620S
Guillemot / Hercules
   Scan @home Touch 1248
   USB
   0x04a5, 0x20de
   "FlatbedScanner21"
   u222v064.bin
   Relabeled Acer 3300
Guillemot / Hercules
   Maxi A4 36bit
   USB
   0x04a5, 0x2060
   "FlatbedScanner20"
   u96v121.bin
   Relabeled Benq 620U, needs firmware from Benq
Mitsubishi
   Diamondview 648UT
   USB
   ?
   "FlatbedScanner13"
   ?
   Relabeled Acer 320
Mitsubishi
   Diamondview 650U
   USB
   0x04a5, 0x20b0
   "FlatbedScanner23"
   u176v042.bin
   Relabeled Acer 4300

Note:  The Agfa SnapScan Touch uses a different protocol and will not be supported by the Snapscan backend. It may possibly be supported by the HP3300 backend (see the SourceForge  project and Bertrik Sikkens  homepage for more information.
Getting it working
Get the latest version of SANE from the SANE homepage. Development of the SnapScan backend is now done in SANE CVS, so there's no need to download a separate source package for the backend anymore.

To correctly install your scanner, you should

   1. detect your scanner device

      machine# tools/find-scanner
         find-scanner: found scanner "AGFA SNAPSCAN 310 1.20" at device
         /dev/XXXXX

   2. if you want your scanner to be recognized easily, create a link. For SCSI scanners use:

      machine# ln -s /dev/XXXXX /dev/scanner

      For USB scanners use:

      machine# ln -s /dev/XXXXX /dev/usbscanner

   3. you should now scan using xscanimage

      machine$ xscanimage



Pagina's: << < (2/6) > >>

Naar de volledige versie