kzet hier even alles neer zodat ik zeker niets belangrijks weglaat (is wel lang he)
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 0000000017ef0000 end: 0000000017ff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 0000000017ff0000 size: 0000000000003000 end: 0000000017ff3000 type: 4
[ 0.000000] copy_e820_map() start: 0000000017ff3000 size: 000000000000d000 end: 0000000018000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
[ 0.000000] BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 383MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 98288) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 98288
[ 0.000000] HighMem 98288 -> 98288
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 98288
[ 0.000000] On node 0 totalpages: 98288
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 735 pages used for memmap
[ 0.000000] Normal zone: 93457 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP (v000 AOPEN ) @ 0x000f6880
[ 0.000000] ACPI: RSDT (v001 AOPEN AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3000
[ 0.000000] ACPI: FADT (v001 AOPEN AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x17ff3040
[ 0.000000] ACPI: DSDT (v001 AOPEN AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7b00000)
[ 0.000000] Detected 1079.509 MHz processor.
[ 32.059242] Built 1 zonelists. Total pages: 97521
[ 32.059250] Kernel command line: root=UUID=13fd3daa-06ed-49f3-9114-6a17c95f9fa9 ro quiet splash
[ 32.059634] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 32.059653] mapped APIC to ffffd000 (0130a000)
[ 32.059661] Enabling fast FPU save and restore... done.
[ 32.059667] Enabling unmasked SIMD FPU exception support... done.
[ 32.059690] Initializing CPU#0
[ 32.059780] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 32.061140] Console: colour VGA+ 80x25
[ 32.062214] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 32.063702] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.094965] Memory: 378688k/393152k available (1992k kernel code, 13916k reserved, 893k data, 328k init, 0k highmem)
[ 32.094987] virtual kernel memory layout:
[ 32.094989] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 32.094992] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 32.094995] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
[ 32.094998] lowmem : 0xc0000000 - 0xd7ff0000 ( 383 MB)
[ 32.095000] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 32.095003] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 32.095005] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 32.095012] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 32.171717] Calibrating delay using timer specific routine.. 2160.51 BogoMIPS (lpj=4321032)
[ 32.171799] Security Framework v1.0.0 initialized
[ 32.171817] SELinux: Disabled at boot.
[ 32.171850] Mount-cache hash table entries: 512
[ 32.172136] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 32.172159] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 32.172164] CPU: L2 cache: 128K
[ 32.172171] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 32.172193] Compat vDSO mapped to ffffe000.
[ 32.172208] Remapping vsyscall page to ffffe000
[ 32.172228] Checking 'hlt' instruction... OK.
[ 32.187891] SMP alternatives: switching to UP code
[ 32.188228] Freeing SMP alternatives: 11k freed
[ 32.188636] Early unpacking initramfs... done
[ 32.833469] ACPI: Core revision 20060707
[ 32.838165] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 32.841300] ACPI: setting ELCR to 0200 (from 0c40)
[ 32.843381] CPU0: Intel Celeron (Coppermine) stepping 06
[ 32.843393] SMP motherboard not detected.
[ 32.843398] Local APIC not detected. Using dummy APIC emulation.
[ 32.843495] Brought up 1 CPUs
[ 32.844035] Booting paravirtualized kernel on bare hardware
[ 32.844231] Time: 17:23:32 Date: 03/20/107
[ 32.844306] NET: Registered protocol family 16
[ 32.844577] EISA bus registered
[ 32.844593] ACPI: bus type pci registered
[ 32.865018] PCI: PCI BIOS revision 2.10 entry at 0xfb110, last bus=2
[ 32.865023] PCI: Using configuration type 1
[ 32.865027] Setting up standard PCI resources
[ 32.877015] ACPI: Interpreter enabled
[ 32.877028] ACPI: Using PIC for interrupt routing
[ 32.878614] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.878625] PCI: Probing PCI hardware (bus 00)
[ 32.878806] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 32.879544] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[ 32.879554] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[ 32.879843] Boot video device is 0000:01:00.0
[ 32.880048] PCI: Transparent bridge - 0000:00:1e.0
[ 32.880104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.905341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 32.907011] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 32.907656] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 32.908248] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 32.908848] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 32.909473] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 32.910070] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 32.910663] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 32.911262] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 32.917990] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.918019] pnp: PnP ACPI init
[ 32.928240] pnp: PnP ACPI: found 15 devices
[ 32.928253] PnPBIOS: Disabled by ACPI PNP
[ 32.928396] PCI: Using ACPI for IRQ routing
[ 32.928404] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.936886] NET: Registered protocol family 8
[ 32.936891] NET: Registered protocol family 20
[ 32.938563] PCI: Bridge: 0000:00:01.0
[ 32.938571] IO window: disabled.
[ 32.938579] MEM window: e4000000-e5ffffff
[ 32.938585] PREFETCH window: d0000000-dfffffff
[ 32.938592] PCI: Bridge: 0000:00:1e.0
[ 32.938597] IO window: c000-cfff
[ 32.938604] MEM window: e6000000-e7ffffff
[ 32.938610] PREFETCH window: 20000000-200fffff
[ 32.938631] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 32.938697] NET: Registered protocol family 2
[ 32.975418] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 32.975631] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 32.976077] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 32.976360] TCP: Hash tables configured (established 16384 bind 8192)
[ 32.976367] TCP reno registered
[ 32.987571] checking if image is initramfs... it is
[ 34.162794] Freeing initrd memory: 6750k freed
[ 34.163789] audit: initializing netlink socket (disabled)
[ 34.163820] audit(1177089813.288:1): initialized
[ 34.164149] VFS: Disk quotas dquot_6.5.1
[ 34.164197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 34.164307] io scheduler noop registered
[ 34.164314] io scheduler anticipatory registered
[ 34.164319] io scheduler deadline registered
[ 34.164341] io scheduler cfq registered (default)
[ 34.164906] isapnp: Scanning for PnP cards...
[ 34.518195] isapnp: No Plug & Play device found
[ 34.640584] Real Time Clock Driver v1.12ac
[ 34.640709] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 34.640895] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.641385] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.643243] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 34.643921] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 34.644705] mice: PS/2 mouse device common for all mice
[ 34.646425] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 34.647062] input: Macintosh mouse button emulation as /class/input/input0
[ 34.647155] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 34.647165] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 34.647619] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 34.650383] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.650398] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 34.650788] EISA: Probing bus 0 at eisa.0
[ 34.650817] Cannot allocate resource for EISA slot 4
[ 34.650836] EISA: Detected 0 cards.
[ 34.681000] TCP cubic registered
[ 34.681019] NET: Registered protocol family 1
[ 34.681066] Using IPI No-Shortcut mode
[ 34.681249] ACPI: (supports S0 S1 S4 S5)
[ 34.681356] Magic number: 3:117:391
[ 34.682245] Time: tsc clocksource has been installed.
[ 34.682699] Freeing unused kernel memory: 328k freed
[ 34.695870] input: AT Translated Set 2 keyboard as /class/input/input1
[ 36.287313] Capability LSM initialized
[ 36.391820] ACPI: Fan [FAN] (on)
[ 36.403216] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 36.403229] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 36.407502] ACPI: Thermal Zone [THRM] (24 C)
[ 37.823637] SCSI subsystem initialized
[ 37.842173] libata version 2.20 loaded.
[ 37.853493] ata_piix 0000:00:1f.1: version 2.10ac1
[ 37.853543] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 37.853674] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 37.853755] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 37.853791] scsi0 : ata_piix
[ 37.878364] usbcore: registered new interface driver usbfs
[ 37.878428] usbcore: registered new interface driver hub
[ 37.878503] usbcore: registered new device driver usb
[ 37.956426] USB Universal Host Controller Interface driver v3.0
[ 38.016601] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 38.016612] ata1.00: ATA-6: WDC WD400JB-00JJC0, 05.01C05, max UDMA/100
[ 38.016618] ata1.00: 78165360 sectors, multi 16: LBA
[ 38.024618] ata1.00: ata_hpa_resize 1: sectors = 78165360, hpa_sectors = 78165360
[ 38.024630] ata1.00: configured for UDMA/100
[ 38.024654] scsi1 : ata_piix
[ 38.191131] ATA: abnormal status 0x7F on port 0x00010177
[ 38.352231] ata2.00: ATAPI, max MWDMA2
[ 6.304000] Time: acpi_pm clocksource has been installed.
[ 6.460000] ata2.00: configured for MWDMA2
[ 6.460000] scsi 0:0:0:0: Direct-Access ATA WDC WD400JB-00JJ 05.0 PQ: 0 ANSI: 5
[ 6.460000] scsi 1:0:0:0: CD-ROM E-IDE CD-ROM 56X/AKH A80 PQ: 0 ANSI: 5
[ 6.460000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 6.460000] PCI: setting IRQ 11 as level-triggered
[ 6.460000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 6.460000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 6.460000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 6.464000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 6.464000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
[ 6.464000] usb usb1: configuration #1 chosen from 1 choice
[ 6.464000] hub 1-0:1.0: USB hub found
[ 6.464000] hub 1-0:1.0: 2 ports detected
[ 6.496000] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
[ 6.496000] sda: Write Protect is off
[ 6.496000] sda: Mode Sense: 00 3a 00 00
[ 6.496000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.496000] SCSI device sda: 78165360 512-byte hdwr sectors (40021 MB)
[ 6.496000] sda: Write Protect is off
[ 6.496000] sda: Mode Sense: 00 3a 00 00
[ 6.496000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.496000] sda: sda1 sda2 < sda5 >
[ 6.532000] sd 0:0:0:0: Attached scsi disk sda
[ 6.540000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.540000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.552000] sr0: scsi3-mmc drive: 227x/52x cd/rw xa/form2 cdda tray
[ 6.552000] Uniform CD-ROM driver Revision: 3.20
[ 6.552000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.568000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 6.568000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 6.568000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 6.568000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 6.568000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 6.568000] uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000d400
[ 6.568000] usb usb2: configuration #1 chosen from 1 choice
[ 6.568000] hub 2-0:1.0: USB hub found
[ 6.568000] hub 2-0:1.0: 2 ports detected
[ 6.672000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 6.672000] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[ 6.672000] 3c59x: Donald Becker and others.
www.scyld.com/network/vortex.html[ 6.672000] 0000:02:07.0: 3Com PCI 3c900 Cyclone 10Mbps TPO at d881e000.
[ 6.908000] Attempting manual resume
[ 6.908000] swsusp: Resume From Partition 8:5
[ 6.908000] PM: Checking swsusp image.
[ 6.908000] PM: Resume from disk failed.
[ 6.972000] kjournald starting. Commit interval 5 seconds
[ 6.972000] EXT3-fs: mounted filesystem with ordered data mode.
[ 18.420000] eth0: setting full-duplex.
[ 19.748000] NET: Registered protocol family 17
[ 21.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.040000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.040000] iTCO_vendor_support: vendor-support=0
[ 21.044000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 21.044000] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 21.044000] iTCO_wdt: No card detected
[ 21.076000] Intel 82802 RNG detected
[ 21.376000] Linux agpgart interface v0.102 (c) Dave Jones
[ 21.744000] agpgart: Detected an Intel i815 Chipset.
[ 21.748000] agpgart: AGP aperture is 64M @ 0xe0000000
[ 22.360000] parport: PnPBIOS parport detected.
[ 22.360000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 22.536000] input: PC Speaker as /class/input/input2
[ 23.064000] input: ImExPS/2 Logitech Wheel Mouse as /class/input/input3
[ 36.624000] ata2.00: qc timeout (cmd 0xa0)
[ 36.624000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 36.624000] ata2.00: (BMDMA stat 0x25)
[ 36.624000] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in
[ 36.624000] res 51/51:03:00:12:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 43.624000] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 66.640000] ata2: port failed to respond (30 secs, Status 0xd8)
[ 66.640000] ata2: soft resetting port
[ 66.804000] ATA: abnormal status 0x7F on port 0x00010177
[ 66.968000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 66.968000] ata2.00: revalidation failed (errno=-5)
[ 66.968000] ata2: failed to recover some devices, retrying in 5 secs
[ 71.972000] ata2: soft resetting port
[ 72.136000] ATA: abnormal status 0x7F on port 0x00010177
[ 72.464000] ata2.00: configured for MWDMA2
[ 72.464000] ata2: EH complete
[ 102.488000] ata2.00: qc timeout (cmd 0xa0)
[ 102.488000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 102.488000] ata2.00: (BMDMA stat 0x25)
[ 102.488000] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in
[ 102.488000] res 51/51:03:00:12:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 109.488000] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 132.504000] ata2: port failed to respond (30 secs, Status 0xd8)
[ 132.504000] ata2: soft resetting port
[ 132.668000] ATA: abnormal status 0x7F on port 0x00010177
[ 132.832000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 132.832000] ata2.00: revalidation failed (errno=-5)
[ 132.832000] ata2: failed to recover some devices, retrying in 5 secs
[ 137.836000] ata2: soft resetting port
[ 138.000000] ATA: abnormal status 0x7F on port 0x00010177
[ 138.328000] ata2.00: configured for MWDMA2
[ 138.328000] ata2: EH complete
[ 168.340000] ata2.00: qc timeout (cmd 0xa0)
[ 168.340000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 168.340000] ata2.00: (BMDMA stat 0x25)
[ 168.340000] ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 254 in
[ 168.340000] res 51/51:03:00:12:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 175.340000] ata2: port is slow to respond, please be patient (Status 0xd8)
[ 198.236000] lp0: using parport0 (interrupt-driven).
[ 198.316000] Adding 1124508k swap on /dev/disk/by-uuid/d227c7cb-9a3a-4d73-8cc5-df6774b8d6c0. Priority:-1 extents:1 across:1124508k
[ 198.356000] ata2: port failed to respond (30 secs, Status 0xd8)
[ 198.356000] ata2: soft resetting port
[ 198.416000] EXT3 FS on sda1, internal journal
[ 198.520000] ATA: abnormal status 0x7F on port 0x00010177
[ 198.684000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x1)
[ 198.684000] ata2.00: revalidation failed (errno=-5)
[ 198.684000] ata2: failed to recover some devices, retrying in 5 secs
[ 198.768000] NET: Registered protocol family 10
[ 198.768000] lo: Disabled Privacy Extensions
[ 203.688000] ata2: soft resetting port
[ 203.852000] ATA: abnormal status 0x7F on port 0x00010177
[ 204.180000] ata2.00: configured for MWDMA2
[ 204.180000] ata2: EH complete
[ 205.592000] input: Power Button (FF) as /class/input/input4
[ 205.604000] ACPI: Power Button (FF) [PWRF]
[ 205.676000] input: Power Button (CM) as /class/input/input5
[ 205.676000] ACPI: Power Button (CM) [PWRB]
[ 205.724000] Using specific hotkey driver
[ 205.784000] No dock devices found.
[ 205.884000] ibm_acpi: ec object not found
[ 206.132000] pcc_acpi: loading...
[ 209.088000] eth0: no IPv6 routers present
[ 213.436000] ppdev: user-space parallel port driver
[ 215.068000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 215.068000] apm: overridden by ACPI.
[ 216.800000] Bluetooth: Core ver 2.11
[ 216.800000] NET: Registered protocol family 31
[ 216.800000] Bluetooth: HCI device and connection manager initialized
[ 216.800000] Bluetooth: HCI socket layer initialized
[ 216.948000] Bluetooth: L2CAP ver 2.8
[ 216.948000] Bluetooth: L2CAP socket layer initialized
[ 217.188000] Bluetooth: RFCOMM socket layer initialized
[ 217.188000] Bluetooth: RFCOMM TTY layer initialized
[ 217.188000] Bluetooth: RFCOMM ver 1.8
[ 231.804000] eth0: no IPv6 routers present
reinhout@reinhout-desktop:~$
------------------------------------------------------------------------
edit: Ik voeg nog even iets toe na het lijstje zelf bekeken te hebben:
daar staat iets van ATA 2; wel ik kreeg er ook een error mee als ik de live-cd probeerde te draaien.