Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: beryl  (gelezen 2517 keer)

kevinuitboekel

  • Gast
beryl
« Gepost op: 2007/03/30, 16:30:28 »
Ik heb beryl geinstaleerd op mijn Ubuntu Fiesty Fawn! Ik start Beryl en ik zie een scherm met allemaal zwart en witte blokjes, tussen de blokjes door zie je beryl dat een beetje werkt maar ik krijg dus heel wazig beeld kan iemand mij helpen?

Offline Soul-Sing

  • Lid
beryl
« Reactie #1 Gepost op: 2007/03/30, 16:41:32 »
Citaat van: kevinuitboekel
Ik heb beryl geinstaleerd op mijn Ubuntu Fiesty Fawn! Ik start Beryl en ik zie een scherm met allemaal zwart en witte blokjes, tussen de blokjes door zie je beryl dat een beetje werkt maar ik krijg dus heel wazig beeld kan iemand mij helpen?
doorloop deze wiki even en laat ons weten welke graf.kaart je hebt.en of de je de juiste drivers reeds geinstalleerd hebt, en welke versie van ubuntu je draait: https://wiki.ubuntu.com/NederlandstaligeDocumentatie/Beryl?highlight=%28beryl%29

kevinuitboekel

  • Gast
beryl
« Reactie #2 Gepost op: 2007/03/30, 16:56:29 »
ik hebv een Ati video kaart x700 volgens mij iets van 256 mb geheugen dus hij zou het moeten doen ik heb net even de wiki doorgelopen

kevinuitboekel

  • Gast
beryl
« Reactie #3 Gepost op: 2007/03/30, 17:04:16 »
Versie: Ubuntu fiesty fawn 7.4
Kaart: Ati redeon X700 (256 mb)
Werkgeheugen) 1024 mb
Processor: pentium 4

Ik heb de wiki doorgelopenmaar het werkt nog steeds niet!
HELP1

Offline Soul-Sing

  • Lid
beryl
« Reactie #4 Gepost op: 2007/03/30, 17:25:50 »
Citaat van: kevinuitboekel
Versie: Ubuntu fiesty fawn 7.4
Kaart: Ati redeon X700 (256 mb)
Werkgeheugen) 1024 mb
Processor: pentium 4

Ik heb de wiki doorgelopenmaar het werkt nog steeds niet!
HELP1
doe eens  glxinfo  in de terminal en post de gegevens hier.

kevinuitboekel

  • Gast
beryl
« Reactie #5 Gepost op: 2007/03/30, 17:32:59 »
glxinfo
name of display: :0.0
libGL warning: 3D driver claims to not support visual 0x4b
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI R300 20060815 x86/MMX/SSE2 TCL
OpenGL version string: 1.3 Mesa 6.5.2
OpenGL extensions:
    GL_ARB_fragment_program, GL_ARB_imaging, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_texture_border_clamp,
    GL_ARB_texture_compression, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
    GL_MESAX_texture_float, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
    GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
    GL_EXT_draw_range_elements, GL_EXT_gpu_program_parameters,
    GL_EXT_histogram, GL_EXT_packed_pixels, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
    GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp,
    GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
    GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
    GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_APPLE_packed_pixels, GL_ATI_blend_equation_separate,
    GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
    GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
    GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x23 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x24 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x25 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x26 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x27 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x28 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x29 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2a 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2b 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2c 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x2d 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x2e 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x2f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x30 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0  0  0  0  0  0 0 None
0x31 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x32 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  0 16 16 16 16  0 0 Slow
0x4b 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
kevinvandooren@ubuntu:~$

Offline Soul-Sing

  • Lid
beryl
« Reactie #6 Gepost op: 2007/03/30, 17:38:43 »
je hebt direct rendering. dat is positief.

zou je deze howto van profox eens willen doornemen. dingen die je reeds hebt gedaan
natuurlijk overslaan. zie ook: http://forum.ubuntu-nl.org/topic/8638 ik ben vooral benieuwd
naar je xorg.conf:
Citaat
sudo gedit /etc/X11/xorg.conf
toepassingen -> hulpmiddelen -> terminalvenster

typ in terminalvenster:
gksu gedit /etc/apt/sources.list

voeg dit onderaan toe:
Code:
## Beryl
deb http://ubuntu.beryl-project.org feisty main
deb-src http://ubuntu.beryl-project.org feisty main
bestand opslaan en sluiten

== nu beryl installeren ==

sudo apt-get update
sudo apt-get install beryl emerald-themes emerald
---------------------------------------------------------------------------------------------------------------------
dit heb je waarschijnlijk reeds gedaan als het goed is
---------------------------------------------------------------------------------------------------------------------

best eerst backup maken van X: sudo cp /etc/X11/xorg.conf /etc/X11/xorg.backup

Nu moet je de X.org server nog een beetje tweaken, en hem ook beter laten werken met Beryl (voor video etc.) door de kleurenresolutie te beperken tot 16 bit in plaats van 24/32 bit.

dus:

gksu gedit /etc/X11/xorg.conf

Zoek de: Section "Module"
en zorg ervoor dat deze 3 modules tussen de lijst staan, voeg ze toe als ze er niet tussen staan:
Code:
Load "dri"
Load "dbe"
Load "glx"
Zoek dan de: Section "Device"

en voeg deze lijn toe ergens tussen deze section (maakt niet uit waar, voeg het gewoon toe als een nieuwe lijn, voor de End Section bijvoorbeeld)
Code:
Option  "XAANoOffscreenPixmaps"
Voeg dan ook nog deze 2 sections toe indien ze nog niet aanwezig zijn in de file (de DRI sectie is waarschijnlijk al aanwezig, dus moet je enkel de andere section nog toevoegen)
Code:
Section "DRI"
        Mode 0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection
En als laatste, om de performance heel hard te verhogen (en de kleurkwaliteit een klein beetje te verlagen) kan je nog de DefaultDepth instelling van 24 naar 16 veranderen, in de: Section "Screen"

opslaan/sluiten; en X herstarten! commando: sudo /etc/init.d/gdm restart; of ctrl+alt+backspace, als scherm zwart blijft: switchen naar terminal kan via Ctrl+Alt+F1, inloggen, en dan: sudo /etc/init.d/gdm restart

je zou beryl na het opnieuw inloggen kunnen starten met het commando beryl-manager als dat werkt kan je beryl-manager als een startup script toevoegen aan je sessies.

PS: je kan ook de performance van de grafische kaart verbeteren met driconf

succes

als X.org niet meer wil starten, zet de backup terug (of doe: sudo dpkg-reconfigure xserver-xorg): sudo cp /etc/X11/xorg.backup /etc/X11/xorg.conf

kevinuitboekel

  • Gast
beryl
« Reactie #7 Gepost op: 2007/03/30, 18:03:20 »
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"

Load "dbe"
Load "glx"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "gb"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "ATI Technologies Inc RV410 [Radeon X700]"
   Driver      "ati"
   BusID      "PCI:1:0:0"
        Option          "XAANoOffscreenPixmaps"
        Option          "AccelMethod" "EXA"
EndSection

Section "Monitor"
   Identifier   "Generieke beeldscherm"
   Option      "DPMS"
   HorizSync   28-51
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "ATI Technologies Inc RV410 [Radeon X700]"
   Monitor      "Generieke beeldscherm"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
        Option          "AIGLX"         "true"
EndSection


Section "DRI"
        Mode 0666
EndSection
       
Section "Extensions"
        Option "Composite" "Enable"
EndSection

Offline Soul-Sing

  • Lid
beryl
« Reactie #8 Gepost op: 2007/03/30, 18:11:43 »
Citaat
Section "Module"
    Load    "i2c"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "vbe"
deze section "module" aanpassen zoals boven door profox is beschreven.
"device"ook aanpassen. maak wel nu een back-up van je xorg.conf.!!
en section dri goed bekijken.

kevinuitboekel

  • Gast
beryl
« Reactie #9 Gepost op: 2007/03/30, 18:48:48 »
werkt nog steeds niet!

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
beryl
« Reactie #10 Gepost op: 2007/03/30, 19:59:17 »

Offline Soul-Sing

  • Lid
beryl
« Reactie #11 Gepost op: 2007/03/30, 20:01:09 »
Citaat van: pjotr123
Heb je hier iets aan?
http://forum.ubuntu-nl.org/message/87989#p87989
@pjotr deze neem nou ik net met hem door.....;)

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
beryl
« Reactie #12 Gepost op: 2007/03/30, 20:06:19 »
oeps....

Offline Soul-Sing

  • Lid
beryl
« Reactie #13 Gepost op: 2007/03/30, 20:12:14 »
Citaat van: kevinuitboekel
werkt nog steeds niet!
ook niet na een reboot? ik heb met je de wiki doorgelopen, en een howto doorgelopen
van een ervaren "ati-beryl-specialist". zelf gebruik ik nvidia.
je hebt je xorg.conf aangepast. ik heb geen idee meer, helaas.

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
beryl
« Reactie #14 Gepost op: 2007/03/30, 20:13:13 »
@Leon: zullen we die instructie van profoX toevoegen aan de Wiki?

Offline Soul-Sing

  • Lid
beryl
« Reactie #15 Gepost op: 2007/03/30, 20:22:52 »
Citaat van: pjotr123
@Leon: zullen we die instructie van profoX toevoegen aan de Wiki?
dan zou ik eerst de off. site van beryl willen doornemen. ik heb geen ati-kaart, het scheelt altijd
als je zelf je xorg.conf hebt aangepast, of niet.