dmesg | grep echi -i: geen resultaten (verschijnt niks)
dmesg | grep usb -i:
guus@guus-laptop:~$ dmesg | grep usb -i
[ 5.252000] usbcore: registered new interface driver usbfs
[ 5.252000] usbcore: registered new interface driver hub
[ 5.252000] usbcore: registered new device driver usb
[ 5.252000] USB Universal Host Controller Interface driver v3.0
[ 5.252000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.252000] usb usb1: configuration #1 chosen from 1 choice
[ 5.252000] hub 1-0:1.0: USB hub found
[ 5.356000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.356000] usb usb2: configuration #1 chosen from 1 choice
[ 5.356000] hub 2-0:1.0: USB hub found
[ 5.596000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 5.768000] usb 1-1: configuration #1 chosen from 1 choice
[ 6.012000] usb 1-2: new low speed USB device using uhci_hcd and address 3
[ 6.164000] usb 1-2: configuration #1 chosen from 1 choice
[ 6.168000] usbcore: registered new interface driver libusual
[ 6.176000] Initializing USB Mass Storage driver...
[ 6.176000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6.176000] usbcore: registered new interface driver usb-storage
[ 6.176000] USB Mass Storage support registered.
[ 6.176000] usb-storage: device found at 2
[ 6.176000] usb-storage: waiting for device to settle before scanning
[ 6.268000] usbcore: registered new interface driver hiddev
[ 6.300000] input: USB HID v1.00 Mouse [HID 0461:4d01] on usb-0000:00:1d.0-2
[ 6.300000] usbcore: registered new interface driver usbhid
[ 6.300000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 11.176000] usb-storage: device scan complete
[ 11.180000] scsi 2:0:0:0: Direct-Access USB FLASH DRIVE 34CD PQ: 0 ANSI: 0 CCS
lspci -v | grep usb -i:
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
lsusb -v:
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 003: ID 0461:4d01 Primax Electronics, Ltd Comfort Keyboard
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0461 Primax Electronics, Ltd
idProduct 0x4d01 Comfort Keyboard
bcdDevice 4.41
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 50
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
cannot read device status, Operation not permitted (1)
Bus 001 Device 002: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0 (256MB)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1005 Apacer Technology, Inc.
idProduct 0xb113 Handy Steno 2.0 (256MB)
bcdDevice 1.00
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0 Full speed hub
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0 Full speed hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 1x 2 bytes
bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
Verder maakt het geen verschil of je opstart met de usb stick aangesloten.
Ik weet niet hoe ik in de bios moet komen (geen toetsen aangegeven e.d, alleen het asus logo). Het is een asus laptop uit 2002