Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: scherm voor Toshiba Satellite Pro 4600 met versie 10.04  (gelezen 1449 keer)

scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Gepost op: 2011/01/12, 21:35:35 »
Ik heb net Ubuntu 10.04 geinstaleerd op mijn toshiba Satellite Pro 4600
Mijn scherm blijft klein van formaat.
Wat ik gevonden heb is dat ik een bestand moest aanmaken xorg.conf en in de dir. plaatsen ect/x11.
met de inhoud:

Section "Monitor"
Identifier "Configurend Monitor"
Option "DPMS" "true"
HorizSync 30.0-60.0
VertRefresh 50.0-70.0
EndSection

Section "Screen"
Indentifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" 800x600"
EndSubSection

EndSection



Na het opnieuw opstarten van de de computer bleef de computer hangen bij nog steeds het kleine scherm van Ubuntu.

Als er iemand mij kan helpen zal ik dat erg op prijs stellen.
Ik heb verder weinig of geen ervaring, met Ubuntu.
b.v.brakel-at-xs4all.nl

[Mod edit: welkom, maar wel je e-mailadres onleesbaar gemaakt voor spambots. Dit is een forum, anderen hebben wellicht ook profijt van tips. Je kan ook elkaar een PB sturen  ;)]
« Laatst bewerkt op: 2011/01/12, 21:40:36 door asphyxia »

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Re: scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Reactie #1 Gepost op: 2011/01/12, 21:38:34 »
Wat voor videokaart zit erin?

Offline asphyxia

  • Forumteam
Re: scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Reactie #2 Gepost op: 2011/01/12, 21:48:09 »
Als je niet weet wat voor videokaart je hebt -dat zou zomaar kunnen- dan komen we daar wel achter.
Ga eens naar Toepassingen>>Hulpmiddelen, en start de Terminal.

De terminal is vergelijkbaar met een dos-box, daarin kan je commando's geven buiten de grafische schil om.
Geef daar eens het commando:

sudo lshw -html > hardware.html
(l=kleine letter L)
Daarna je password ingeven. Je ziet geen tekens, maar dat hoort zo. Daarna Enter.
Korte uitleg: met 'sudo' krijg je tijdelijk rootrechten om dit soort dingen te doen. Een rootaccount bestaat nl. niet standaard in Linux. 'lshw' staat voor list hardware.
Je hardware wordt nu als .html file weggeschreven naar je Home map. Daar vindt je de file 'hardware.html', en daarin staat je video kaart. Post dat resultaat eens hier  ;)
« Laatst bewerkt op: 2011/01/12, 21:51:02 door asphyxia »
Als de werkelijkheid er niet was, zou de wereld er heel anders uitzien. [Theo Maassen]
Alles is te kraken, niets is veilig, zorg dus voor zoveel mogelijk niets. [Ramana]

Re: scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Reactie #3 Gepost op: 2011/01/12, 22:00:39 »

id:
bas-laptop
description: Notebook
product: SP4600
vendor: TOSHIBA
version: Version 1.0
serial: 81337282G,PS460E-0C8X7-DU,SS460-0C8X7DU
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration:
administrator_password = disabled
boot = normal
chassis = notebook
frontpanel_password = disabled
keyboard_password = disabled
power-on_password = disabled
uuid = F9F7E300-9739-11D5-8060-C3D081337282
id:
core
description: Motherboard
product: Portable PC
vendor: TOSHIBA
physical id:
0
version: Version A0
serial: 0000000000
id:
firmware
description: BIOS
vendor: TOSHIBA
physical id:
0
version: Version 2.50 (06/18/2001)
size: 128KiB
capacity: 960KiB
capabilities: isa pci pcmcia pnp apm upgrade shadowing vesa cdboot bootselect pcmciaboot edd int13floppytoshiba acpi usb agp biosbootspecification netboot
id:
cpu
description: CPU
product: Pentium III (Coppermine)
vendor: Intel Corp.
physical id:
4
bus info:
cpu@0
version: 6.8.10
slot: 495-PIN MICRO-PGA ZIF SOCKET
size: 650MHz
capacity: 800MHz
width: 32 bits
clock: 100MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 mtrr pge mca cmov pse36 mmx fxsr sse up cpufreq
id:
cache:0
description: L1 cache
physical id:
12
slot: CPU Internal
size: 32KiB
capacity: 32KiB
clock: 1GHz (1.0ns)
capabilities: internal write-back unified
id:
cache:1
description: L2 cache
physical id:
13
slot: CPU Internal
size: 256KiB
capacity: 256KiB
clock: 1GHz (1.0ns)
capabilities: internal write-back unified
id:
memory
description: System Memory
physical id:
81
slot: System board or motherboard
size: 192MiB
capacity: 512MiB
id:
bank:0
description: SODIMM SDRAM Synchronous
physical id:
0
slot: DIMM 0
size: 64MiB
width: 64 bits
id:
bank:1
description: SODIMM SDRAM Synchronous
physical id:
1
slot: DIMM 1
size: 128MiB
width: 64 bits
id:
pci
description: Host bridge
product: 82815 815 Chipset Host Bridge and Memory Controller Hub
vendor: Intel Corporation
physical id:
100
bus info:
pci@0000:00:00.0
version: 11
width: 32 bits
clock: 33MHz
configuration:
driver = agpgart-intel
resources:
irq : 0
memory : f0000000-f3ffffff(prefetchable)
id:
pci:0
description: PCI bridge
product: 82815 815 Chipset AGP Bridge
vendor: Intel Corporation
physical id:
1
bus info:
pci@0000:00:01.0
version: 11
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
resources:
memory : f7f00000-fdffffff
memory : 18000000-180fffff(prefetchable)
id:
display
description: VGA compatible controller
product: CyberBlade/XP
vendor: Trident Microsystems
physical id:
0
bus info:
pci@0000:01:00.0
version: 63
width: 32 bits
clock: 66MHz
capabilities: agp agp-2.0 pm bus_master cap_list
configuration:
latency = 8
resources:
memory : fc000000-fdffffff
memory : fbc00000-fbffffff
memory : f8000000-f9ffffff
memory : f7ff8000-f7ffffff
memory : 18000000-1800ffff(prefetchable)
id:
pci:1
description: PCI bridge
product: 82801 Mobile PCI Bridge
vendor: Intel Corporation
physical id:
1e
bus info:
pci@0000:00:1e.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
resources:
ioport : d000(size=4096)
memory : f7d00000-f7dfffff
memory : c000000-17ffffff(prefetchable)
id:
network
description: Ethernet interface
product: 82801BA/BAM/CA/CAM Ethernet Controller
vendor: Intel Corporation
physical id:
8
bus info:
pci@0000:02:08.0
logical name:
eth0
version: 03
serial: 00:00:39:33:c8:81
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration:
autonegotiation = on
broadcast = yes
driver = e100
driverversion = 3.5.24-k2-NAPI
duplex = full
firmware = N/A
ip = 192.168.178.28
latency = 64
link = yes
maxlatency = 56
mingnt = 8
multicast = yes
port = MII
speed = 100MB/s
resources:
irq : 11
memory : f7dff000-f7dfffff
ioport : df40(size=64)
id:
pcmcia:0
description: CardBus bridge
product: PCI1410 PC card Cardbus Controller
vendor: Texas Instruments
physical id:
c
bus info:
pci@0000:02:0c.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration:
driver = yenta_cardbus
latency = 176
maxlatency = 5
mingnt = 64
resources:
irq : 11
memory : f7d00000-f7d00fff
ioport : d000(size=256)
ioport : d400(size=256)
memory : c000000-fffffff(prefetchable)
memory : 1c000000-1fffffff
id:
network
description: Wireless LAN Card
product: Version 01.01
vendor: TOSHIBA
physical id:
0
slot: Socket 0
resources:
irq : 11
id:
pcmcia:1
description: CardBus bridge
product: ToPIC100 PCI to Cardbus Bridge with ZV Support
vendor: Toshiba America Info Systems
physical id:
d
bus info:
pci@0000:02:0d.0
version: 31
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration:
driver = yenta_cardbus
latency = 0
maxlatency = 5
mingnt = 128
resources:
irq : 11
memory : f7d01000-f7d01fff
ioport : d800(size=256)
ioport : dc00(size=256)
memory : 10000000-13ffffff(prefetchable)
memory : 20000000-23ffffff
id:
pcmcia:2
description: CardBus bridge
product: ToPIC100 PCI to Cardbus Bridge with ZV Support
vendor: Toshiba America Info Systems
physical id:
d.1
bus info:
pci@0000:02:0d.1
version: 31
width: 32 bits
clock: 33MHz
capabilities: pcmcia bus_master cap_list
configuration:
driver = yenta_cardbus
latency = 0
maxlatency = 5
mingnt = 128
resources:
irq : 11
memory : f7d02000-f7d02fff
ioport : 1000(size=256)
ioport : 1400(size=256)
memory : 14000000-17ffffff(prefetchable)
memory : 24000000-27ffffff
id:
isa
description: ISA bridge
product: 82801BAM ISA Bridge (LPC)
vendor: Intel Corporation
physical id:
1f
bus info:
pci@0000:00:1f.0
version: 03
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration:
latency = 0
id:
ide
description: IDE interface
product: 82801BAM IDE U100 Controller
vendor: Intel Corporation
physical id:
1f.1
bus info:
pci@0000:00:1f.1
logical name:
scsi0
logical name:
scsi1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated
configuration:
driver = ata_piix
latency = 0
resources:
irq : 0
ioport : 1f0(size=8)
ioport : 3f6
ioport : 170(size=8)
ioport : 376
ioport : cff0(size=16)
id:
disk
description: ATA Disk
product: TOSHIBA MK1517GA
vendor: Toshiba
physical id:
0
bus info:
scsi@0:0.0.0
logical name:
/dev/sda
version: A1.0
serial: 81CA2241T
size: 14GiB (15GB)
capabilities: partitioned partitioned:dos
configuration:
ansiversion = 5
signature = 00001397
id:
volume:0
description: EXT4 volume
vendor: Linux
physical id:
1
bus info:
scsi@0:0.0.0,1
logical name:
/dev/sda1
logical name:
/
version: 1.0
serial: 2967a993-c1e2-4b7c-870e-f9af9330da6f
size: 13GiB
capacity: 13GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration:
created = 2011-01-11 20:48:09
filesystem = ext4
lastmountpoint = /�4��Ê�|��2Ê”~��ï��g ��g/��~��ï��!������˸��ï��~��ï��~��ï��j
modified = 2011-01-11 22:31:22
mount.fstype = ext4
mount.options = rw,relatime,errors=remount-ro,barrier=1,data=ordered
mounted = 2011-01-12 16:00:26
state = mounted
id:
volume:1
description: Extended partition
physical id:
2
bus info:
scsi@0:0.0.0,2
logical name:
/dev/sda2
size: 528MiB
capacity: 528MiB
capabilities: primary extended partitioned partitioned:extended
id:
logicalvolume
description: Linux swap / Solaris partition
physical id:
5
logical name:
/dev/sda5
capacity: 528MiB
capabilities: nofs
id:
cdrom
description: SCSI CD-ROM
physical id:
1
bus info:
scsi@1:0.0.0
logical name:
/dev/cdrom
logical name:
/dev/scd0
logical name:
/dev/sr0
capabilities: audio
configuration:
status = nodisc
id:
usb:0
description: USB Controller
product: 82801BA/BAM USB Controller #1
vendor: Intel Corporation
physical id:
1f.2
bus info:
pci@0000:00:1f.2
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration:
driver = uhci_hcd
latency = 0
resources:
irq : 11
ioport : cf80(size=32)
id:
usb:1
description: USB Controller
product: 82801BA/BAM USB Controller #1
vendor: Intel Corporation
physical id:
1f.4
bus info:
pci@0000:00:1f.4
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration:
driver = uhci_hcd
latency = 0
resources:
irq : 11
ioport : cf60(size=32)
id:
multimedia
description: Multimedia audio controller
product: 82801BA/BAM AC'97 Audio Controller
vendor: Intel Corporation
physical id:
1f.5
bus info:
pci@0000:00:1f.5
version: 03
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration:
driver = Intel ICH
latency = 0
resources:
irq : 11
ioport : ce00(size=256)
ioport : cdc0(size=64)
id:
communication
description: Modem
product: 82801BA/BAM AC'97 Modem Controller
vendor: Intel Corporation
physical id:
1f.6
bus info:
pci@0000:00:1f.6
version: 03
width: 32 bits
clock: 33MHz
configuration:
latency = 0
resources:
ioport : ca00(size=256)
ioport : c980(size=128)
id:
battery
description: Lithium Ion Battery
vendor: TOSHIBA
physical id:
1
version: mm/dd/yy
serial: 0000000000
slot: 1st Battery
id:
network
description: Wireless interface
physical id:
2
logical name:
eth1
serial: 00:02:2d:14:d1:78
capabilities: ethernet physical wireless
configuration:
broadcast = yes
driver = orinoco
driverversion = 0.15
firmware = Lucent/Agere 9.48
link = yes
multicast = yes
wireless = IEEE 802.11b


[Mod edit: code tags geplaatst. Bas, als je dit soort lange teksten wilt posten, kun je het beste dit tussen de '#' tekens plaatsen. Die staan boven het invoerveld. Dat houdt het wat leesbaarder (moet je maar net weten  ;))]
« Laatst bewerkt op: 2011/01/12, 22:05:24 door asphyxia »

Offline asphyxia

  • Forumteam
Re: scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Reactie #4 Gepost op: 2011/01/12, 22:20:02 »
Je hebt een Trident cyberblade/XP, dat is een relatief 'oude' videokaart.

De oplossing die je hebt toegepast, komt uit dit oudere draadje:
http://forum.ubuntu-nl.org/hardware-en-drivers/trident-cyberblade-xp-video-kaart/msg605353/
en hierin wordt weer deze (nog oudere) Howto genoemd:
http://forum.ubuntu-nl.org/hardware-en-drivers/trident-video-card-driver-probleem/

Check eens of je het op de goede manier weggeschreven hebt in je Xorg file, met rootrechten (dus met gksudo, zoals aangegeven)  ;)
Als de werkelijkheid er niet was, zou de wereld er heel anders uitzien. [Theo Maassen]
Alles is te kraken, niets is veilig, zorg dus voor zoveel mogelijk niets. [Ramana]

Re: scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Reactie #5 Gepost op: 2011/01/12, 23:43:26 »
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
   Identifier   "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Option "DPMS" "true"
HorizSync 30.0-60.0
VertRefresh 50.0-70.0
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection

EndSection


Dit heb ik met "sudo gedit /ect/x11/xorg.conf" 

geplaatst en het werkt bedankt.

Offline JvH

  • Lid
Re: scherm voor Toshiba Satellite Pro 4600 met versie 10.04
« Reactie #6 Gepost op: 2011/01/13, 08:46:36 »
Kijk eens aan... hier was ik ook al een tijdje naar op zoek...
Ik zit ook nog met zo'n laptop, en wil er al een tijdje een minimalistische Ubuntu op proberen. Lubuntu was niet echt een succes, maar misschien iets met Fluxbox...?