Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: asus grafische kaart resolutie 800x600 nvidia crash  (gelezen 5917 keer)

Offline eliknight

  • Lid
asus grafische kaart resolutie 800x600 nvidia crash
« Gepost op: 2011/01/20, 11:27:19 »
hoi allemaal,
Ik heb niet veel verstand van ubuntu maar ik heb een probleem die veel mensen hebben heb ik al gelezen, maar als ik nvidia installeer via de site van nvidia dan crashed mijn ubuntu. ik kan dan niet in grub komen en moet een volledig nieuwe installatie doen,
Ik heb een schermresolutie van 800x 600 en kan alleen omlaag in schermresolutie
heb via synaptic nu nvidia geinstalleerd en weet niet hoe ik die aan krijg want ik moet de  
Citaat
You do not appear to be using the NVIDIA X driver.  Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.
hoe doe ik dat zonder dat ubuntu weer geinstalleerd moet worden?
« Laatst bewerkt op: 2011/01/20, 14:41:35 door eliknight »

Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #1 Gepost op: 2011/01/20, 11:32:49 »
Welkom op het forum,

Citaat
(just run `nvidia-xconfig` as root), and restart the X server.

Heb je dit commando al in een terminal uitgevoerd?
Laptop MSI U123 (160 GB) 1 GB ramMint Cinnamon 18 LTS
Laptop Toshiba Tecra  (80GB) 2 GB ram Fedora 24
Dell Latitude D600 Pentium M 1400MHz 512MB ram
Bouwjaar 2003 met Debian 8 (Jessie)

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #2 Gepost op: 2011/01/20, 12:35:04 »
WARNING: Unable to locate/open X configuration file.


ERROR: Unable to write to directory '/etc/X11'.

Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #3 Gepost op: 2011/01/20, 12:38:55 »
Heb je dat commando zo uitgevoerd:

sudo nvidia-xconfig

Na het opgeven van je wachtwoord, en op enter drukken, wat is dan de uitkomst?

daarna dus ook de x server herstarten met Ctrl+Alt+Backspace.  ;)
« Laatst bewerkt op: 2011/01/20, 12:41:03 door Progger »
Laptop MSI U123 (160 GB) 1 GB ramMint Cinnamon 18 LTS
Laptop Toshiba Tecra  (80GB) 2 GB ram Fedora 24
Dell Latitude D600 Pentium M 1400MHz 512MB ram
Bouwjaar 2003 met Debian 8 (Jessie)

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #4 Gepost op: 2011/01/20, 13:51:12 »
WARNING: Unable to locate/open X configuration file.

New X configuration file written to '/etc/X11/xorg.conf'


weer niet dus...

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #5 Gepost op: 2011/01/20, 13:52:35 »
Using X configuration file: "/etc/X11/xorg.conf".
Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup'
New X configuration file written to '/etc/X11/xorg.conf'



nu gecrashed kom weer niet in ubuntu
« Laatst bewerkt op: 2011/01/20, 14:40:47 door eliknight »

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #6 Gepost op: 2011/01/20, 14:47:29 »
kan ik vanaf CD nog bij mijn comp?

Offline rja

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #7 Gepost op: 2011/01/20, 15:57:16 »
Werkt de recovery  optie nog wel ?

Dan zou je dit kunnen proberen.

http://sites.google.com/site/computertip/geenbeeld

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #8 Gepost op: 2011/01/20, 16:55:32 »
ik kom niet in een recovery menu


Offline heir4c

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #9 Gepost op: 2011/01/20, 17:03:32 »
Als je opstart kom je in het grub menu (normaal gezien)
Daar kies je voor de tweede regel. Dat is de recovery mode.
Na een hele hoop tekst zie je een menu. Bij één van de keuzes staat er iets in verband met de Xserver. Kies die en klik op Enter.
Nadat de computer zijn werk heeft gedaan kom je weer in het menu en dan klik je gewoon op Enter.
Kan je nu doorstarten?
Zo ja kijk dan via Systeem>Beheer>Stuurprogramma's of daar een driver aangegeven is. Is die er niet dan geen installeren. Is die er wel (of zelfs meerdere) dan klik je die aan (recommend).
Als er een driver geïnstalleerd/aangevinkt is kan je de nvidia-settings aanpassen. Openen met via terminal en tik in
sudo nvidia-settings
Kan je helemaal niet via de recovery mode verder omdat je geen grubmenu te zien krijgt, start dan op met een LiveCD en zoek dan naar het bestand: /etc/X11/xorg.conf
Staat dat er in dan kan je daar veranderingen aanbrengen maar dan moet je dat wel doen als root.
Klik daarvoor op Alt+F2 en tik in:
gksudo nautilusDan opent het bestandsbeheer en kan je de file eventueel aanpassen.
Kopieer die even en post die hier.
Tip: https://makkelijkelinuxtips.blogspot.com/p/1.html en http://wiki.ubuntu-nl.org/   Upload-site:http://imgur.com/
be Open be Free be Ubuntu

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #10 Gepost op: 2011/01/20, 17:38:33 »
kom niet in recovery en niet in grub. Hij blijft zoeken met opstarten.

xorg.conf gevonden...

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder75)  Thu Apr 22 11:44:23 PDT 2010


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection
« Laatst bewerkt op: 2011/01/20, 17:45:32 door eliknight »

Offline heir4c

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #11 Gepost op: 2011/01/20, 23:47:51 »
Dus er is wel degelijk een driver geïnstalleerd anders kan je geen xorg.conf hebben. Word standaard niet meer gebruikt.

De resolutie ontbreekt in de xorg.conf:

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection

In de link hieronder zie je een bericht waar ook een xorg.conf staat. In het bericht eronder staat dezelfde xorg.conf maar dan aangepast.
Scrol naar beneden tot je niet meer verder kan in de twee kaders en dan zie je het verschil:
http://forum.ubuntu-nl.org/hardware-en-drivers/beeld-te-groot-voor-scherm/msg691492/#msg691492

Als je nu via de LiveCd en Alt+F2 het bestand aanpast en opslaat, dan zal het waarschijnlijk weer opstarten.
Klik Alt+F2 en tik in:
gksudo gedit /etc/X11/xorg.confLet op de hoofdletter X
Linux is hoofdlettergevoelig en zal dus niets openen als je x11 intikt inplaats van X11.

Let ook op het volgende!!! : In de link staat in het kader ook in de Section "Device" het volgende:
BoardName      "GeForce 6600 GT"Hier moet je wel je eigen kaarttype ingeven!!!

Maak ook een backup van de xorg.conf, zeker nadat het werkt, dan heb je die altijd moest er iets gebeuren en kan je die gewoon terugplaatsen.
« Laatst bewerkt op: 2011/01/20, 23:51:12 door heir4c »
Tip: https://makkelijkelinuxtips.blogspot.com/p/1.html en http://wiki.ubuntu-nl.org/   Upload-site:http://imgur.com/
be Open be Free be Ubuntu

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #12 Gepost op: 2011/01/21, 10:08:46 »
ga het nu proberen....
en hij doet niks....wat kan ik nu nog proberen?
« Laatst bewerkt op: 2011/01/21, 10:43:37 door eliknight »

Offline heir4c

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #13 Gepost op: 2011/01/21, 16:54:10 »
Nog even een opmerking. Onderstaand hoeft er niet in omdat je geen tweede scherm hebt.
Option         "TwinView" "0"
En bij onderstaande kan je de resolutie aanpassen.
Option         "metamodes" "1280x720_50 +0+0; nvidia-auto-select +0+0"

Je kan ook eens die xorg.conf hernoemen naar xorg.conf.backup en dan opnieuw opstarten. Dan zou hij een nieuwe moeten aanmaken.
Tip: https://makkelijkelinuxtips.blogspot.com/p/1.html en http://wiki.ubuntu-nl.org/   Upload-site:http://imgur.com/
be Open be Free be Ubuntu

Offline rja

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #14 Gepost op: 2011/01/22, 01:24:37 »
Je komt niet in recovery, ergens nog een foutmelding of loopt die gewoon vast ?


Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #15 Gepost op: 2011/01/24, 12:25:29 »
ik kom niet in recovery omdat hij gewoon blijft zoeken naar iets wat hij niet kan vinden .
de comp gaat aan en uit maar verder niet....
 heb net xubuntu er op gezet maar heeft nog steeds maar 800x600 resolutie
« Laatst bewerkt op: 2011/01/24, 14:40:45 door eliknight »

Offline rja

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #16 Gepost op: 2011/01/24, 17:01:11 »
Werkt XUbuntu verder wel goed, behalve de resolutie ?

Je zou dit kunnen proberen om je resolutie hoger te krijgen.

https://wiki.ubuntu.com/X/Config/Resolution

Offline heir4c

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #17 Gepost op: 2011/01/24, 19:37:00 »
Dus je komt ook niet in grub?
Dan kan je beter eerst eens grub herstellen via de liveCD en één van de twee linkjes die ik hier in mijn bericht aangeef: http://forum.ubuntu-nl.org/installatie/grub-rescuegt%27_%27-en-hoe-nu-verder/msg693999/#msg693999
Tip: https://makkelijkelinuxtips.blogspot.com/p/1.html en http://wiki.ubuntu-nl.org/   Upload-site:http://imgur.com/
be Open be Free be Ubuntu

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #18 Gepost op: 2011/01/25, 12:07:05 »
uitkomst xrandr:
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
   800x600        61.0*
   640x480        60.0  

uitkomst lspci -vvnn:
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 0e)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 0e)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fbefffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c000 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at c080 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>

00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800 [size=256]
Region 1: I/O ports at cc00 [size=64]
Region 2: Memory at f9fffc00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f9fff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng

00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7028]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation GT218 [GeForce 210] [10de:0a65] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8334]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at <ignored> (64-bit, prefetchable)
Region 5: I/O ports at dc00 [size=128]
Expansion ROM at fbe00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidiafb, nouveau

01:00.1 Audio device [0403]: nVidia Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8334]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbefc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:028c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at fbfffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

kan iemand hier iets mee??????


Moderator edit: geheel even voorzien van code tags
« Laatst bewerkt op: 2011/02/03, 13:40:07 door Brumm3l »

Offline rja

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #19 Gepost op: 2011/01/25, 14:11:13 »
uitkomst xrandr:
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
   800x600        61.0*
   640x480        60.0 


Wat is de resolutie wat je wilt hebben ?

Dat kun je doen.

Door bijvoorbeeld cvt 1024 768 op de commandline en dan via deze output.

Een xrandr te doen op basis van die output.

En xrandr --newmode ....

Zie :

http://mac.linux.be/content/set-xorgconf-manually-xrandr

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #20 Gepost op: 2011/01/26, 13:54:18 »
cvt 1024 768
# 1024x768 59.92 Hz (CVT 0.79M3) hsync: 47.82 kHz; pclk: 63.50 MHz
Modeline "1024x768_60.00"   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync
en dan?

cvt 1280 1024
# 1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: 109.00 MHz
Modeline "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync
« Laatst bewerkt op: 2011/01/26, 14:40:18 door eliknight »

Offline rja

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #21 Gepost op: 2011/01/26, 18:31:17 »
cvt 1024 768
# 1024x768 59.92 Hz (CVT 0.79M3) hsync: 47.82 kHz; pclk: 63.50 MHz
Modeline "1024x768_60.00"   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync
en dan?

cvt 1280 1024
# 1280x1024 59.89 Hz (CVT 1.31M4) hsync: 63.67 kHz; pclk: 109.00 MHz
Modeline "1280x1024_60.00"  109.00  1280 1368 1496 1712  1024 1027 1034 1063 -hsync +vsync

De regel overnemen, volgens mij.

xrandr --newmode "1024x768_60.00"   63.50  1024 1072 1176 1328  768 771 775 798

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #22 Gepost op: 2011/02/02, 09:51:54 »
moet je dan opnieuw opstarten want hij doet het nog steeds niet. in beeldscherm geeft hij 640X480 en 800x600

xrandr --newmode "1024x768_60.00"   63.50  1024 1072 1176 1328  768 771 775 798
gedaan en daarna :
xrandr
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
   800x600        61.0*
   640x480        60.0 
  1024x768_60.00 (0x11b)   63.0MHz
        h: width  1024 start 1072 end 1176 total 1328 skew    0 clock   47.4KHz
        v: height  768 start  771 end  775 total  798           clock   59.4Hz
maar hij pakt hem niet
« Laatst bewerkt op: 2011/02/02, 09:57:52 door eliknight »

Offline rja

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #23 Gepost op: 2011/02/02, 20:22:40 »
Kun je via Systeem, voorkeuren,  schermen die resolutie kiezen ?

of via

 xrandr --output VGA-0 --mode 1024x768_60.00
« Laatst bewerkt op: 2011/02/02, 20:24:50 door rja »

Offline eliknight

  • Lid
Re: asus grafische kaart resolutie 800x600 nvidia crash
« Reactie #24 Gepost op: 2011/02/04, 09:34:03 »
Kun je via Systeem, voorkeuren,  schermen die resolutie kiezen ?

of via

 xrandr --output VGA-0 --mode 1024x768_60.00
na xrandr
warning: output VGA-0 not found; ignoring