ik heb momenteel twee problemen die aan het vorige probleem gerelateerd zijn.
ten eerste krijg ik het niet voor elkaar dat ik vensters van het ene monitor naar de andere kan slepen.
en ten tweede wil ik de resolutie op 1024x768 hebben.
bij de monitor die aan de intel kaart hangt is dit geen probleem.
echter bij de monitor die aan de ati hangt werkt het niet naar behoren.
ik heb wel beeld, echter klopt het beeld maar voor 75%, daarnaast klopt de beweging van me muis niet met wat er op het beeldscherm word weergegeven.
de monitoren zijn identiek, dus ik vermoed dat het aan de ati kaart ligt.
mijn xorg.conf ziet er momenteel als volgd uit.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
RgbPath "/etc/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/X11/fonts/misc/"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/TTF/"
FontPath "/usr/share/X11/fonts/OTF"
FontPath "/usr/share/X11/fonts/Type1/"
FontPath "/usr/share/X11/fonts/CID/"
FontPath "/usr/share/X11/fonts/100dpi/"
FontPath "/usr/share/X11/fonts/75dpi/"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "dbe"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "glx"
Load "int10"
Load "record"
Load "xtrap"
Load "freetype"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "Monitor"
# DisplaySize 340 270 # mm
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL E172FP"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# DisplaySize 340 270 # mm
Identifier "Monitor1"
VendorName "DEL"
ModelName "DELL E172FP"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.0 - 80.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
#Section "Monitor"
# Identifier "Monitor1"
# VendorName "Monitor Vendor"
# ModelName "Monitor Model"
#EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, : float, : "True"/"False",
### : "String", : " Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # []
#Option "SWcursor" # []
#Option "Dac6Bit" # []
#Option "Dac8Bit" # []
#Option "BusType" # []
#Option "CPPIOMode" # []
#Option "CPusecTimeout" #
#Option "AGPMode" #
#Option "AGPFastWrite" # []
#Option "AGPSize" #
#Option "GARTSize" #
#Option "RingSize" #
#Option "BufferSize" #
#Option "EnableDepthMoves" # []
#Option "EnablePageFlip" # []
#Option "NoBackBuffer" # []
#Option "DMAForXv" # []
#Option "FBTexPercent" #
#Option "PanelOff" # []
#Option "DDCMode" # []
#Option "MonitorLayout" # []
#Option "IgnoreEDID" # []
#Option "UseFBDev" # []
#Option "MergedFB" # []
#Option "CRT2HSync" # []
#Option "CRT2VRefresh" # []
#Option "CRT2Position" # []
#Option "MetaModes" # []
#Option "MergedDPI" # []
#Option "MergedXinerama" # []
#Option "MergedXineramaCRT2IsScreen0" # []
#Option "MergedNonRectangular" # []
#Option "MergedMouseRestriction" # []
#Option "DisplayPriority" # []
#Option "PanelSize" # []
#Option "ForceMinDotClock" #
#Option "ColorTiling" # []
#Option "VideoKey" #
#Option "RageTheatreCrystal" #
#Option "RageTheatreTunerPort" #
#Option "RageTheatreCompositePort" #
#Option "RageTheatreSVideoPort" #
#Option "TunerType" #
#Option "RageTheatreMicrocPath" #
#Option "RageTheatreMicrocType" #
#Option "RenderAccel" # []
#Option "SubPixelOrder" # []
#Option "ShowCache" # []
#Option "DynamicClocks" # []
#Option "BIOSHotkeys" # []
#Option "VGAAccess" # []
#Option "ReverseDDC" # []
#Option "LVDSProbePLL" # []
#Option "AccelMethod" #
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:4:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, : float, : "True"/"False",
### : "String", : " Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # []
#Option "SWcursor" # []
#Option "ColorKey" #
#Option "CacheLines" #
#Option "Dac6Bit" # []
#Option "DRI" # []
#Option "NoDDC" # []
#Option "ShowCache" # []
#Option "XvMCSurfaces" #
#Option "PageFlip" # []
Identifier "Card1"
Driver "i810"
VendorName "Intel Corporation"
BoardName "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768""800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "dri"
Mode 0666
EndSection
Section "ServerFlags"
Option "Xinerama" "enable"
EndSection