Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Geen 3D acceleratie  (gelezen 834 keer)

Offline Marinus

  • Lid
Geen 3D acceleratie
« Gepost op: 2007/05/22, 10:26:07 »
Wat moet ik aan onderstaande X11/xorg.conf veranderen om mijn 3D te laten werken?
Bij voorbaat dank!

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "be"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "NVIDIA GeForce2 GTS/Pro"
   Driver      "nvidia"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Generieke beeldscherm"
   Option      "DPMS"
   HorizSync   28-64
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "NVIDIA GeForce2 GTS/Pro"
   Monitor      "Generieke beeldscherm"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection
Ubuntu 12.04 Unity

Offline markba

  • Lid
    • http://markbaaijens.nl/
Geen 3D acceleratie
« Reactie #1 Gepost op: 2007/05/22, 11:33:53 »
Het is niet aan te raden om zelf in je xorg.conf te gaan 'rommelen'.

Heb je al de 'Restricted Driver Manager' opgestart? Deze detecteert automatisch of je een gesloten driver nodig hebt, maar kan deze (op zerzoek) ook installeren.

Kijk anders hier eens op:
https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia

Offline Marinus

  • Lid
Geen 3D acceleratie
« Reactie #2 Gepost op: 2007/05/22, 12:16:17 »
Citaat van: markba
Het is niet aan te raden om zelf in je xorg.conf te gaan 'rommelen'.

Heb je al de 'Restricted Driver Manager' opgestart? Deze detecteert automatisch of je een gesloten driver nodig hebt, maar kan deze (op zerzoek) ook installeren.

Kijk anders hier eens op:
https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia
Je bedoeld de "beperkt ondersteunde stuurprogramma's"? Deze heb ik geinstalleerd (legacy), dan werken mijn 3D sreensavers, maar de resolutie gaat niet hoger dan 800x600. Na via  "sudo dpkg-reconfigure -p high xserver-xorg" 1280x1024 toe te voegen geen 3D screensavers meer en ook geen GLX rendering. Wat kan ik doen om dit te verhelpen?
Ubuntu 12.04 Unity

Geen 3D acceleratie
« Reactie #3 Gepost op: 2007/05/22, 12:41:10 »
In je xorg.conf kun je het volgende doen:
In Section "Device" het volgende toevoegen:

Section "Device"
    Identifier    "NVIDIA GeForce2 GTS/Pro"
    Driver        "nvidia"
    BusID        "PCI:1:0:0"
    Option        "AddARGBVisuals"    "True"
    Option        "AddARGBGLXVisuals"    "True"

EndSection

Zo zou het kunnen werken.

Offline Marinus

  • Lid
Geen 3D acceleratie
« Reactie #4 Gepost op: 2007/05/22, 12:59:50 »
Citaat van: Marinus
Citaat van: markba
Het is niet aan te raden om zelf in je xorg.conf te gaan 'rommelen'.

Heb je al de 'Restricted Driver Manager' opgestart? Deze detecteert automatisch of je een gesloten driver nodig hebt, maar kan deze (op zerzoek) ook installeren.

Kijk anders hier eens op:
https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia
Je bedoeld de "beperkt ondersteunde stuurprogramma's"? Deze heb ik geinstalleerd (legacy), dan werken mijn 3D sreensavers, maar de resolutie gaat niet hoger dan 800x600. Na via  "sudo dpkg-reconfigure -p high xserver-xorg" 1280x1024 toe te voegen geen 3D screensavers meer en ook geen GLX rendering. Wat kan ik doen om dit te verhelpen?
Dank je markba, het probleem is opgelost met je howto te gebruiken :-)
Ubuntu 12.04 Unity

Offline Marinus

  • Lid
Geen 3D acceleratie
« Reactie #5 Gepost op: 2007/05/22, 13:00:53 »
Citaat van: CORVUS_CORAX
In je xorg.conf kun je het volgende doen:
In Section "Device" het volgende toevoegen:

Section "Device"
    Identifier    "NVIDIA GeForce2 GTS/Pro"
    Driver        "nvidia"
    BusID        "PCI:1:0:0"
    Option        "AddARGBVisuals"    "True"
    Option        "AddARGBGLXVisuals"    "True"

EndSection

Zo zou het kunnen werken.
Dank je CORVUS_CORAX, het probleem is opgelost :-)
Ubuntu 12.04 Unity