Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Ubuntu kan shares van windows niet zien?  (gelezen 9063 keer)

Ubuntu kan shares van windows niet zien?
« Gepost op: 2008/06/06, 19:49:10 »
Geachte heren en dames,

Ik zit nu al een tijdje te proberen om mijn ubuntu server toegang te geven tot mijn windows machine.
Als ik via windows naar mijn netwerk kijk, kan ik gewoon mijn shares zien.
Maar als ik dit in Ubuntu probeer zie ik helemaal niks.

Toch kan ik wel verbinding maken met mijn windows box en op de schijf komen, als ik "connect to a server" gebruik



kan iemand mij uitleggen wat ik hieraan kan doen?

Offline joop13

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #1 Gepost op: 2008/06/06, 21:35:19 »
Ik heb (bijna) hetzelfde probleem al aangekaart in http://forum.ubuntu-nl.org/topic/27771! En tot nu toe geen antwoord gekregen. We zijn kennelijk de enige twee met dit probleem.
Door gebrek aan visie gaat het volk ten onder, een keur van raadgevers brengt het tot bloei.

Twee laptops 16.04 Ubuntu, 1 laptop Linux Mint,

Ubuntu kan shares van windows niet zien?
« Reactie #2 Gepost op: 2008/06/06, 22:11:24 »
Jullie hebben wel al samba geinstalleerd ??
Gebruikers aangemaakt voor de gedeelde mappen ??
(in Ubuntu)
I don't suffer from insanity, I enjoy every minute of it.
Microsoft geeft je een raam, Linux geeft je een heel huis :D

Offline woteb

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #3 Gepost op: 2008/06/06, 22:14:41 »
Hebben jullie beiden ook het volgende gedaan:

sudo smbpasswd -a GEBRUIKER
(en dan 1x het sudowachtwoord en 2x sambawachtwoord opgeven). GEBRUIKER is natuurlijk de gebruikersnaam voor degene die toegang moet hebben.

smbpasswd moet zowel op de SERVER als op het WERKSTATION worden uitgevoerd.

Dus een gebruiker aangemaakt via smbpasswd. Die -a staat voor Add (toevoegen). De communicatie met een linuxmachine via samba heeft namelijk TWEE keer een wachtwoord nodig. De eerste op de eigen machine, en het tweede (smbpasswd) voor het communiceren via Samba.

Verder, als je van een Linuxsysteem met een ander Linuxsysteem communiceert, kun je beter nfs gebruiker dan samba. Samba is bedoelt voor communicatie tussen een Linux en een Windows machine. NFS voor Linux met Linux. NFS draait sneller dan samba.
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

Ubuntu kan shares van windows niet zien?
« Reactie #4 Gepost op: 2008/06/06, 22:35:01 »
Allemaal al gedaan :(

"Gebruikers aangemaakt voor de gedeelde mappen ??" wat bedoel je daarmee?

Ik snap het niet met de vorige versie nooit problemen gehad, alles deed het gelijk, nu niet meer :S

Offline woteb

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #5 Gepost op: 2008/06/06, 22:50:41 »
Citaat van: mainstream
Allemaal al gedaan :(

"Gebruikers aangemaakt voor de gedeelde mappen ??" wat bedoel je daarmee?

Ik snap het niet met de vorige versie nooit problemen gehad, alles deed het gelijk, nu niet meer :S
Wat allemaal al gedaan? Smbpasswd uitgevoerd? Je hebt toch een nieuwe installatie uitgevoerd? Daardoor is ook je oude gebruikersaccount verdwenen.
En bij een herinstallatie kun je makkelijk iets vergeten, smbpasswd is zo'n zaak die je al gouw over het hoofd ziet, en dan is het zeer frustrerend om het probleem op te lossen.

Zelf gebruik ik bij een servermigratie of upgrade altijd een checklist waar ik afstreep wat ik al heb gedaan.

Nogmaals: Samba vereist dat je op een Linuxsysteem, behalve een linuxaccount ook nog een 'windows' account nodig hebt. Dat maak je met smbpasswd aan.

Verder, heb je op je server ook jouw smb.conf aangepast? Hoe ziet dat er uit? En als je een aanpassing hebt gemaakt op de server in je smb.conf bestandje, heb je samba dan ook herstart met het commando: /etc/init.d/samba restartMaar als jou probleem zich alleen voordoet tussen jouw Linux server en jouw Linux werkstation, dan kun je toch veel makkelijker werken met nfs in plaats van het voor Windows noodzakelijke samba.
nfs is helemaal net moeilijk, en we willen je er graag mee helpen. Thuis heb ik ook een nfs netwerk. Voor mijn laptop heb ik wel smbclient nodig, omdat ik een Landisk heb die via samba communiceert en ik alleen via samba dat ding kan benaderen over het netwerk.
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

Ubuntu kan shares van windows niet zien?
« Reactie #6 Gepost op: 2008/06/06, 23:29:35 »
Ik heb heb linux op 1 computer en windows op de andere.
Smbpasswd is ook uitgevoerd.

Ubuntu kan shares van windows niet zien?
« Reactie #7 Gepost op: 2008/06/06, 23:31:03 »
Ik ga samba eens opnieuw installeren en kijken waar ik dan kom...

Offline woteb

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #8 Gepost op: 2008/06/06, 23:52:58 »
Ik neem aan dat je gebruikersaccount op beide systemen identiek zijn, dus ook met hetzelfde wachtwoord (op Ubuntu dus 2x)..? Kun je ook jouw /etc/samba/smb.conf eens posten? En welke rechten heb je toegekend aan de gedeelde map? En staat het ownership (de eigenaarsrechten) wel goed ingesteld?
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

Offline joop13

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #9 Gepost op: 2008/06/07, 02:04:43 »
Ik heb Samba al een keer opnieuw geinstalleerd en ook sudo smbpasswrd al een keer uitgevoerd. Zelfde probleem blijft, de enige map die ik wel kan benaderen en lezen is mijn \home\joop map op de hoofdcomputer vanaf de laptop.

En ja, bij GG deed alles het vanaf de laptop probleemloos.

En smb.conf ziet er zo uit:

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan < for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how nsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom
Ik zie daar niets vreemds aan maar jullie misschien wel?
Door gebrek aan visie gaat het volk ten onder, een keur van raadgevers brengt het tot bloei.

Twee laptops 16.04 Ubuntu, 1 laptop Linux Mint,

Ubuntu kan shares van windows niet zien?
« Reactie #10 Gepost op: 2008/06/07, 02:57:28 »
Misschien dat je de volgende How To ff moet doornemen ??


#############
Veel mensen zien een zeer belangrijk ding over het hoofd of vergeten het, maar als je het weet dan is het zo als altijd…………. simpel
sudo smbpasswd -a [gebruiker] was voor mijn de bottleneck.


Ik ga er van uit dat je ergens al een map op je Linux PC hebt staan die je wil delen.
Ik heb de map in de root van mijn HDD staan (je kan de mapjes natuurlijk ook ander noemen)
/data/werkmap
/data/mp3

Ook moet Webmin geïnstalleerd zijn !!

Samba instaleren:

Open je browser en typ https://localhost:10000/ of ipv “localhost
I don't suffer from insanity, I enjoy every minute of it.
Microsoft geeft je een raam, Linux geeft je een heel huis :D

Offline woteb

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #11 Gepost op: 2008/06/07, 12:21:50 »
Citaat van: joop13
Ik zie daar niets vreemds aan maar jullie misschien wel?
Jazeker.... je hebt namelijk niets om te delen..... en dan valt er ook niets te zien...

Maak eens om te proberen een directory aan (in je / directory) en noem dat ding test. Dat doe je met het commando:
cd /
mkdir test
Die directory maken we voor iedereen toegankelijk: chmod 0777 testIn het bestandje /etc/samba/smb.conf maken we die directory ook toegankelijk:

Je voegt onderaan de volgende regels toe:

[test]
  comment = testdirectory
  path = /test
  browsable = yes
  writable = yes
  create mask = 0777
  directory mask = 0777

En sla het bestandje op. Vervolgens start je de sambaserver (dus NIET de SERVER zelf!!) opnieuw op:
/etc/init.d/samaba restartWat zie je nu vanaf je Windows machine?
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

Offline joop13

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #12 Gepost op: 2008/06/07, 13:30:40 »
Vooreerst: @woteb

Dit is een gedeelte van de smb.conf van de computer waarvan ik de bestanden wil zien op mijn laptop en daar gebruiken:

[hda3]
path = /media/hda3
available = yes
browsable = yes
public = yes
writable = yes
Deze computer draait nog onder 7.10. Moet ik hierbij ook de create mask en directory mask zetten?

@ Gandyman: Dank je wel voor de volledige beschrijving van wat ik zou moeten doen. Ik heb al een bladwijzer hiernaar gemaakt om het later nog eens uit te voeren. Maar: Webmin staat niet geinstalleerd en is ook niet te vinden in Synaptic.
Door gebrek aan visie gaat het volk ten onder, een keur van raadgevers brengt het tot bloei.

Twee laptops 16.04 Ubuntu, 1 laptop Linux Mint,

Offline woteb

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #13 Gepost op: 2008/06/07, 14:20:39 »
Citaat van: joop13
[hda3]
path = /media/hda3
available = yes
browsable = yes
public = yes
writable = yes
Deze computer draait nog onder 7.10. Moet ik hierbij ook de create mask en directory mask zetten?
Available en public zijn niet nodig! Die regels kun je uitschakelen door er een # voor te zetten.

Create mask en directory mask zijn nodig als je op deze share wil laten schrijven en directories aan wil laten maken. Zelfs met de allereerste versie van Ubuntu (en nog veel ouder) werkt deze manier van werken. Is dus geen specifiek Hardy gegeven. Kun je dus ook voor Gutsy, Dapper of Feisty gebruiken.

Wat je moet nalopen is het volgende:

1. Heb je de samba server opnieuw opgestart?
2. Heb je de juiste rechten aan de share toegekend. Je gebruikt zo te zien een partitie van jouw systeem. Wellicht staat die alleen toegankelijk op het root account van je server. Doe eens in een terminal cd /
ls -l
Is dan die /dev/hda3 toegankelijk, dus staat er rwxrwxrwx ...??
Zo NIET, dan toegankelijk maken met het commando chmod -R 0777 /media3. Bestaat de gebruiker op beide systemen met HETZELFDE wachtwoord? En op het Linuxsysteem ook nog eens met smbpasswd. Gandyman merkt net als mij op dat dit vaak de bottleneck is. Linux gaat nu eenmaal anders om met wachtwoorden dan Windows. Met smbpasswd zorg je ervoor dat Windows met Linux (of omgekeerd) kan communiceren.
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

Offline joop13

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #14 Gepost op: 2008/06/07, 15:10:28 »
Ik blijf wel even doorproberen met jullie suggesties. Op dit moment ziet mijn laptop de belangrijkste schijf op mijn hoofdcomputer weer. En weliswaar andere niet, ik zie nog niet waar het probleem zit>>>> of toch???? En jawel, als ik van alle verwijzingen het available en public voorzie van een # en de create mask en directory mask zet op de manier van Woteb, kan ik ze weer bereiken en gebruiken.

Vergeet je in dit geval om de available en public te voorzien van een # dan ziet mijn laptop ze wel, maar kan ze niet aankoppelen.

Hartelijk dank voor jullie hulp.
Door gebrek aan visie gaat het volk ten onder, een keur van raadgevers brengt het tot bloei.

Twee laptops 16.04 Ubuntu, 1 laptop Linux Mint,

Offline woteb

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #15 Gepost op: 2008/06/07, 15:24:51 »
Kijk, je bent dus op weg naar het resultaat wat je wilt hebben. Vergeet niet iedere keer na een wijziging in dat smb.conf bestandje de sambaserver te herstarten:
/etc/init.d/samba restartMaar met
Citaat
[hda3]
path = /media/hda3
available = yes
browsable = yes
public = yes
writable = yes
create mask = 0777
directory mask = 0777
zie je die schijf niet, en met

Citaat
[hda3]
path = /media/hda3
#available = yes
browsable = yes
#public = yes
writable = yes
create mask = 0777
directory mask = 0777
wel?
Laptop, HP 550, Dual Core 1 GB RAM/2 Ghz:: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie) Fluxbox / IceWM / XFCE4 / Openbox / LXDE.
3 Werkstations + 1 laptop: Debian 5.0 Testing (Squeeze)  (lite-blokkendoos editie Gnome/XFCE/IceWM)
Server: Debian 5.0 Stable (Lenny)

Offline joop13

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #16 Gepost op: 2008/06/07, 16:32:58 »
Inderdaad, want ik had bij een aantal schijven vergeten om die te "behekken" en dan zegt de laptop gewoon weer: Kan gedeelde Windows map niet aankoppelen. Hij ziet hem dus wel als gedeeld maar kan er niet bij...
Door gebrek aan visie gaat het volk ten onder, een keur van raadgevers brengt het tot bloei.

Twee laptops 16.04 Ubuntu, 1 laptop Linux Mint,

Ubuntu kan shares van windows niet zien?
« Reactie #17 Gepost op: 2008/06/07, 19:58:04 »
Voor alle duidelijkheid,

Die How To die ik plaatste is dus voor een komplete share met gebruikers te maken op/in Ubuntu, eventueel met behulp van Webmin.
Webmin zit niet in de repro's die moet je apart installeren,
INDIEN je dit wilt.

De rest van de How TO plaatste ik omdat je hieruit kan pakken wat je nodig hebt en kunt vergelijken met jouw situatie.

Zoals Woteb al opmerkte, 1 klein dingetje fout zetten en de boel werkt niet.
Dit zou ook al kunnen zijn dat je de naam verkeerd hebt staan.
Windo is daar erg gevoelig voor...

Verder zal ik niet storen, Woteb bergeleid je er wel doorheen. (wink)
I don't suffer from insanity, I enjoy every minute of it.
Microsoft geeft je een raam, Linux geeft je een heel huis :D

runen

  • Gast
Ubuntu kan shares van windows niet zien?
« Reactie #18 Gepost op: 2008/06/12, 14:27:44 »
Ik Heb een soortegelijk probleem. Ik zie wel de gedeelde mappen in mijn (windows xp) laptop en mijn NAS maar niet de gedeelde windowsmappen van mijn pc waarop Windows en Ubuntu genstalleerd staan. De gedeelde Ubuntumappen zie ik wel. Als ik netwerk aanklik dan zie ik wel mijn Computernaam erbij staan maar als ik de map open blijkt ie leeg te zijn. Ik ben nu al een week aan het stoeien met Samba en Winbind maar het lukt maar niet. Het moet bijna wel aan de windowskant zitten maar ik zou niet weten wat ik anders in zou moeten stellen daar. Iemand een tip voor me?

Offline joop13

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #19 Gepost op: 2008/06/12, 16:05:42 »
Citaat van: runen
Ik Heb een soortegelijk probleem. Ik zie wel de gedeelde mappen in mijn (windows xp) laptop en mijn NAS maar niet de gedeelde windowsmappen van mijn pc waarop Windows en Ubuntu genstalleerd staan. De gedeelde Ubuntumappen zie ik wel. Als ik netwerk aanklik dan zie ik wel mijn Computernaam erbij staan maar als ik de map open blijkt ie leeg te zijn. Ik ben nu al een week aan het stoeien met Samba en Winbind maar het lukt maar niet. Het moet bijna wel aan de windowskant zitten maar ik zou niet weten wat ik anders in zou moeten stellen daar. Iemand een tip voor me?
Bij mij werkte post 16 waarbij op de computer waarvan je de mappen niet meer ziet de regels in smb.conf met available en public voorzien worden van een # en twee nieuwe regels met create mask = 0777 en directory mask = 0777 worden ingevoegd.
Door gebrek aan visie gaat het volk ten onder, een keur van raadgevers brengt het tot bloei.

Twee laptops 16.04 Ubuntu, 1 laptop Linux Mint,

Offline Gamer

  • Lid
Ubuntu kan shares van windows niet zien?
« Reactie #20 Gepost op: 2008/08/09, 11:00:52 »
Ik gebruik ubuntu nu z'n 6 weken en liep tegen het zelfde probleem aan.
En ik  gebruik echter het netwerk alleen om af en toe wat bestanden heen en weer te copieren.
Ik weet niet of dit de normale weg is maar Ik heb het als volgt gedaan: open file browser en type bij location het IP adres van je windows computer in. Ik greeg meteen alle gedeelde mappen te zien