Merk HP Pavilion zd8000
Output terminal
[ 28.807891] b43-phy0: Broadcom 4318 WLAN found
[ 28.849128] b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
[ 28.849155] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
[ 29.718857] input: b43-phy0 as /devices/virtual/input/input9
[ 30.031299] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 30.902678] b43-phy0 debug: Chip initialized
[ 30.902856] b43-phy0 debug: 32-bit DMA initialized
[ 30.920338] Registered led device: b43-phy0:radio
[ 30.920377] b43-phy0 debug: Wireless interface started
[ 30.920389] b43-phy0: Radio hardware status changed to DISABLED
[ 30.920429] b43-phy0 debug: Adding Interface type 2
[ 30.975953] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 114.599773] b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 114.599784] b43-phy0 debug: Removing Interface type 2
[ 114.659917] b43-phy0 debug: Wireless interface stopped
[ 114.660017] b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 0/64
[ 114.660089] b43-phy0 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
[ 114.667783] b43-phy0 debug: DMA-32 0x0280 (TX) max used slots: 0/128
[ 114.675718] b43-phy0 debug: DMA-32 0x0260 (TX) max used slots: 0/128
[ 114.683711] b43-phy0 debug: DMA-32 0x0240 (TX) max used slots: 0/128
[ 114.691717] b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 2/128
[ 114.696855] b43-phy0 debug: DMA-32 0x0200 (TX) max used slots: 0/128
[ 114.775927] input: b43-phy0 as /devices/virtual/input/input10
[ 114.958336] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 115.736609] b43-phy0 debug: Chip initialized
[ 115.736827] b43-phy0 debug: 32-bit DMA initialized
[ 115.755506] Registered led device: b43-phy0:radio
[ 115.755545] b43-phy0 debug: Wireless interface started
[ 115.804088] b43-phy0 debug: Adding Interface type 2
[ 115.804136] b43-phy0: Radio hardware status changed to DISABLED
[ 116.150805] b43-phy0 debug: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 174.633886] b43-phy0 debug: Disabling hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 174.633910] b43-phy0 debug: Removing Interface type 2
[ 174.713504] b43-phy0 debug: Wireless interface stopped
[ 174.713626] b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 0/64
[ 174.713693] b43-phy0 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
[ 174.721276] b43-phy0 debug: DMA-32 0x0280 (TX) max used slots: 0/128
[ 174.729265] b43-phy0 debug: DMA-32 0x0260 (TX) max used slots: 0/128
[ 174.737265] b43-phy0 debug: DMA-32 0x0240 (TX) max used slots: 0/128
[ 174.745255] b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 2/128
[ 174.753255] b43-phy0 debug: DMA-32 0x0200 (TX) max used slots: 0/128
[ 174.917648] input: b43-phy0 as /devices/virtual/input/input11
[ 175.068117] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 175.862129] b43-phy0 debug: Chip initialized
[ 175.862350] b43-phy0 debug: 32-bit DMA initialized
[ 175.880993] Registered led device: b43-phy0:radio
[ 175.881033] b43-phy0 debug: Wireless interface started
[ 175.947243] b43-phy0: Radio hardware status changed to DISABLED
[ 175.977611] b43-phy0 debug: Adding Interface type 2
[ 3594.100604] b43-phy0 debug: Removing Interface type 2
[ 3594.160716] b43-phy0 debug: Wireless interface stopped
[ 3594.160802] b43-phy0 debug: DMA-32 0x0200 (RX) max used slots: 0/64
[ 3594.160851] b43-phy0 debug: DMA-32 0x02A0 (TX) max used slots: 0/128
[ 3594.168563] b43-phy0 debug: DMA-32 0x0280 (TX) max used slots: 0/128
[ 3594.174684] b43-phy0 debug: DMA-32 0x0260 (TX) max used slots: 0/128
[ 3594.180556] b43-phy0 debug: DMA-32 0x0240 (TX) max used slots: 0/128
[ 3594.188553] b43-phy0 debug: DMA-32 0x0220 (TX) max used slots: 2/128
[ 3594.196548] b43-phy0 debug: DMA-32 0x0200 (TX) max used slots: 0/128
[ 3594.867112] input: b43-phy0 as /devices/virtual/input/input12
[ 3595.019023] b43-phy0 debug: Loading firmware version 351.126 (2006-07-29 05:54:02)
[ 3595.833147] b43-phy0 debug: Chip initialized
[ 3595.833670] b43-phy0 debug: 32-bit DMA initialized
[ 3595.852229] Registered led device: b43-phy0:radio
[ 3595.852270] b43-phy0 debug: Wireless interface started
[ 3595.899614] b43-phy0 debug: Adding Interface type 2
[ 3595.899643] b43-phy0: Radio hardware status changed to DISABLED
[ 3596.576211] b43-phy0: Radio turned on by software
[ 3596.576221] b43-phy0: The hardware RF-kill button still turns the radio physically off. Press the button to turn it on.