Ik heb met behulp van Truecrypt een USB stick laten encrypten daarbij werd de stick uiteraard ook geformateerd met als bijkomend effect dat ik deze niet meer kan mounten op mijn computer. De USB stick wordt wel herkend maar ik weet niet hoe ik deze nu moet mounten en laten automounten. Ik krijg als terugkoppeling dat er een superblock is. Weet iemand hoe dit euvel op te lossen is? Ik heb de output van wat ik tot nu geprobeerd heb bijgevoegd.
swl@Helium:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 125f:1036 A-DATA Technology Co., Ltd.
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 003: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
swl@Helium:~$ sudo fdisk -l
[sudo] password for swl:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a7c1e
Device Boot Start End Blocks Id System
/dev/sda1 * 1 9718 78055424 83 Linux
/dev/sda2 9718 9730 93185 5 Extended
/dev/sda5 9718 9730 93184 82 Linux swap / Solaris
Disk /dev/sdc: 2021 MB, 2021654528 bytes
63 heads, 62 sectors/track, 1010 cylinders
Units = cylinders of 3906 * 512 = 1999872 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00049b6b
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 1010 1972499 c W95 FAT32 (LBA)
swl@Helium:~$ sudo mkdir /media/bohrium
swl@Helium:~$ sudo mount -t vfat /dev/sdc1 /media/bohrium -o uid=1000,gid=100,utf8,dmask=027,fmask=137
mount: wrong fs type, bad option, bad superblock on /dev/sdc1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
swl@Helium:~$ dmesg|tail
[ 603.336139] Linking with IODL-1: channel is 1
[ 605.852154] Linking with IODL-1: channel is 1
[ 608.376150] Linking with IODL-1: channel is 1
[ 610.892145] Linking with IODL-1: channel is 1
[ 613.408129] Linking with IODL-1: channel is 1
[ 615.128230] FAT: invalid media value (0x89)
[ 615.128241] VFS: Can't find a valid FAT filesystem on dev sdc1.
[ 615.924134] Linking with IODL-1: channel is 1
[ 615.945012] Associated successfully
[ 615.945025] Using B rates
swl@Helium:~$
