Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: dual screen probleem  (gelezen 2211 keer)

killerwhale65

  • Gast
dual screen probleem
« Gepost op: 2007/10/29, 17:19:59 »
hoi,

ik ben nieuw bij Kubuntu. Ik heb versie 7.10. Mijn grafische kaart is van Nvidia. Nu heb ik 2 monitors: 1  primary 19" TFT (de belangrijkste dus), en een secondary 15" CRT. Deze werken beide met de default VESA driver. Maar ik denk dat het beter is om de Nvidia driver te installeren (klopt dit?), dus heb ik die in de restricted drivers aangezet. Na een herstart start echter mijn klein scherm op ipv het groot, en ik slaag er niet in om mijn groot aan de praat te krijgen. Hoe moet ik dit doen?

alvast bedankt!

Matt

Offline Ron

  • Forumteam
    • r0n
    • Over Tholen
dual screen probleem
« Reactie #1 Gepost op: 2007/10/29, 19:07:43 »
Heb je het volgende geprobeerd ?
Systeem > Beheer > Screen and Graphics
Zo werkt dat met Gnome, hoe het met KDE moet weet ik niet, iemand anders misschien ?
Openstandaard Evangelist, OpenSource Promotor, OpenData voorstander.
Xubuntu gebruiker en voorstander
Er is ook nog een andere hobby.

dual screen probleem
« Reactie #2 Gepost op: 2007/10/29, 19:16:37 »
Onder KDE weet ik het niet.
Onder Gnome met de nvidia-new drivers moest ik het script dat door "screen and graphics" gemaakt werd manueel aanpassen :-(

Donderbokje

  • Gast
dual screen probleem
« Reactie #3 Gepost op: 2007/10/29, 19:37:59 »
Ook ik heb de xorg.conf handmatig aan moeten passen voor een 17" en 20" lcd monitor icm met een nvidia kaart.
Je moet namelijk een extra device, monitor en screen section aanmaken.

Offline Scormen

  • Lid
    • LinuxOntdekt.Be
dual screen probleem
« Reactie #4 Gepost op: 2007/10/29, 19:41:22 »
Citaat van: r0n.
Heb je het volgende geprobeerd ?
Systeem > Beheer > Screen and Graphics
Zo werkt dat met Gnome, hoe het met KDE moet weet ik niet, iemand anders misschien ?
Pas op met die "Screen and graphics"... Dat is momenteel nog redelijk buggie!

Afgelopen weekend pas problemen mee gehad, ik kreeg mijn eigen schermresolutie niet hoger dan 640xiets, totdat ik een backup van xconf terugzette!

Kris
Ubuntu gebruiker #18341 | Linux gebruiker #456955
· Mijn persoonlijke Linux blog

Offline Duckie

  • Lid
dual screen probleem
« Reactie #5 Gepost op: 2007/10/29, 20:49:34 »
Van de week ben ik aan het stoeien geweest met xrandr op Gutsy om eens te kijken of ik de tv-uit en de vga aansluiting van mijn laptop hiermee makkelijk in kon stellen.
Er staat ook een grafisch tooltje in de repo's, grandr genaamd waarmee je één en ander kunt instellen. Het werkt met mijn Intel kaartje nog niet zo heel lekker maar er is al wel mee te werken.
____________________________________________

DEan

  • Gast
dual screen probleem
« Reactie #6 Gepost op: 2007/11/04, 21:17:55 »
Hoi,
Ik heb Ubuntu 7.10 met 2 verschillende monitors op 1 videokaart (ATI Radeon (fglrx) met vga en dvi uitgang). Ik krijg het ook niet aan de praat. Ik kan nog niet zo goed omgaan met het Terminalvenster, en daarom is dat tooltje 'grandr' ook erg handig voor mij. Heb het geinstalleerd en het werkt, behalve als ik m'n 2e monitor aansluit. Dan start het programma wel op, maar zodra ik iets wil veranderen stopt het programma en verschijnt er in het terminalvenster:

daniel@pc1:~$ grandr

(grandr:6673): Gtk-CRITICAL **: gtk_list_store_get_value: assertion `VALID_ITER (iter, list_store)' failed

(grandr:6673): GLib-GObject-WARNING **: /build/buildd/glib2.0-2.14.1/gobject/gtype.c:3339: type id `0' is invalid

(grandr:6673): GLib-GObject-WARNING **: can't peek value table for type `' which is not currently referenced
Segmentation fault (core dumped)

Iemand enig idee wat ik hier aan kan doen?

Offline testcees

  • Documentatieteam
    • testcees
    • www.testcees.nl
dual screen probleem
« Reactie #7 Gepost op: 2007/11/04, 23:45:19 »
Hier hetzelfde probleem met grandr.

Lijkt op een bug https://bugs.launchpad.net/debian/+source/grandr/+bug/127829

Met een terminalvenster gebruik ik xrandr voor het 2e beeldscherm.
Klik links bovenin op Documentatie

Offline hadez

  • Lid
dual screen probleem
« Reactie #8 Gepost op: 2007/11/05, 14:41:00 »
Ik heb mijn twee beeldschermen met succes aan de praat, het xorg.conf manueel aanpassen:

$ gedit /etc/X11/xorg.conf

De mijne ziet er als volgt uit:

Citaat
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   Fontpath   "/usr/share/fonts/X11/misc"
   Fontpath   "/usr/share/fonts/X11/cyrillic"
   Fontpath   "/usr/share/fonts/X11/100dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/75dpi/:unscaled"
   Fontpath   "/usr/share/fonts/X11/Type1"
   Fontpath   "/usr/share/fonts/X11/100dpi"
   Fontpath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   Fontpath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load      "i2c"
   Load      "bitmap"
   Load      "ddc"
   Load      "extmod"
   Load      "freetype"
   Load      "glx"
   Load      "int10"
   Load      "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
   Option      "XkbVariant"   "alt-intl"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"   "/dev/input/mice"
   Option      "Protocol"   "ImPS/2"
   Option      "ZAxisMapping"   "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "stylus"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "eraser"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/input/wacom"
   Option      "Type"   "cursor"
   Option      "ForceDevice"   "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "nVidia Corporation G70 [GeForce 7300 GT]"
   Driver      "nvidia"
   Busid      "PCI:2:0:0"
   Option      "AddARGBVisuals"   "True"
   Option      "AddARGBGLXVisuals"   "True"
   Option      "NoLogo"   "True"
EndSection

Section "Monitor"
   Identifier   "M-SERIAL"
   Option      "DPMS"
   Horizsync   28-64
   Vertrefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "nVidia Corporation G70 [GeForce 7300 GT]"
   Monitor      "M-SERIAL"
   Defaultdepth   24
Option          "TwinView"              "true"
   Option          "SecondMonitorHorizSync" "30-70"
        Option          "SecondMonitorVertRefresh" "50-120"
   Option          "MetaModes" "1280x1024, 1280x1024; 1280x1024, 1280x1024;"
   Option          "TwinViewOrientation" "RightOf"
   SubSection "Display"
      Depth   1
      Modes      "1280x1024"   "1024x768"   "832x624"   "800x600"   "720x400"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   4
      Modes      "1280x1024"   "1024x768"   "832x624"   "800x600"   "720x400"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   8
      Modes      "1280x1024"   "1024x768"   "832x624"   "800x600"   "720x400"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   15
      Modes      "1280x1024"   "1024x768"   "832x624"   "800x600"   "720x400"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   16
      Modes      "1280x1024"   "1024x768"   "832x624"   "800x600"   "720x400"   "640x480"
   EndSubSection
   SubSection "Display"
      Depth   24
      Modes      "1280x1024"   "1024x768"   "832x624"   "800x600"   "720x400"   "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
  screen "Default Screen"
   Inputdevice   "Generic Keyboard"
   Inputdevice   "Configured Mouse"
   Inputdevice   "stylus"   "SendCoreEvents"
   Inputdevice   "cursor"   "SendCoreEvents"
   Inputdevice   "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection
Je moet in ieder geval nog een section "Monitor" aanmaken, bij mij zijn het twee dezelfde. Dan moet je bij section "Screen" het volgende erin passen:

Citaat
Option          "TwinView"              "true"
   Option          "SecondMonitorHorizSync" "30-70"
        Option          "SecondMonitorVertRefresh" "50-120"
     Option          "TwinViewOrientation" "RightOf"
die getallen achter SeconMonitorHorizSync moet je aanpassen aan je eigen wensen. Het beschrijft de plaats waarop je tweede monitor moet komen. Het hangt dus af van de resolutie van je standaarbeeldscherm. Althans, dat was het geloof ik :).

Dit staat iig bij mijn eerste beeldscherm..
Citaat
Section "Monitor"
   Identifier   "M-SERIAL"
   Option      "DPMS"
   Horizsync   28-64
   Vertrefresh   43-60
edit:

in de manual ($ man zorg.conf) het volgende over de Sync:

Citaat
HorizSync  horizsync-range
              gives the range(s) of horizontal sync frequencies  supported  by
              the  monitor.   horizsync-range may be a comma separated list of
              either discrete values or ranges of values.  A range  of  values
              is two values separated by a dash.  By default the values are in
              units of kHz.  They may be specified in MHz or Hz if MHz  or  Hz
              is added to the end of the line.  The data given here is used by
              the Xorg server to determine if video modes are within the spec

Donderbokje

  • Gast
dual screen probleem
« Reactie #9 Gepost op: 2007/11/05, 19:50:55 »
Citaat van: Hadez
Je moet in ieder geval nog een section "Monitor" aanmaken, bij mij zijn het twee dezelfde. Dan moet je bij section "Screen" het volgende erin passen:

    Option          "TwinView"              "true"
       Option          "SecondMonitorHorizSync" "30-70"
            Option          "SecondMonitorVertRefresh" "50-120"
         Option          "TwinViewOrientation" "RightOf"
Je kan de optie twinview ook weglaten als je liever twee aparte bureaubladen gebruikt in plaats van 1 grote.
Zelf vind ik dit fijner werken.
Meer info over handmatig je xorg.conf aanpassen voor de verschilende mogelijkheden kun je hier lezen.

paulus1234

  • Gast
dual screen probleem
« Reactie #10 Gepost op: 2007/11/13, 23:58:53 »
Heb je al eens
$gksudo nvidia-settings geprobeerd?