Ja, ik weet het, er moet ergens aan de instellingen liggen, maar waar? Alles op ALSA zetten in gnome-sound-properties werkt niet. Vervolgens gebruik ik de commando's (met alles nog op ALSA in de properties), het resultaat ervan geef ik hieronder weer.
marjon@marjon-laptop:~$ killall pulseaudio
marjon@marjon-laptop:~$ pulseaudio -vvv
I: main.c: PolicyKit refuses acquire-high-priority privilige.
I: main.c: Called SUID root and real-time/high-priority scheduling was requested in the configuration. However, we lack the necessary priviliges:
I: main.c: We are not in group 'pulse-rt' and PolicyKit refuse to grant us priviliges. Dropping SUID again.
I: main.c: For enabling real-time scheduling please acquire the appropriate PolicyKit priviliges, or become a member of 'pulse-rt', or increase the RLIMIT_NICE/RLIMIT_RTPRIO resource limits for this user.
I: main.c: Note that real-time/high-priority scheduling is NOT normally required. If you experience crackling or other sound anomalies, consider one or more of the above solutions.
I: main.c: High-priority scheduling enabled in configuration but now allowed by policy. Disabling forcibly.
W: ltdl-bind-now.c: Failed to find original dlopen loader.
W: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Bewerking niet toegestaan
W: main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Bewerking niet toegestaan
I: main.c: This is PulseAudio 0.9.10
I: main.c: Page size is 4096 bytes
I: main.c: Fresh high-resolution timers available! Bon appetit!
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-hal-detect.so': success
I: module-hal-detect.c: Trying capability alsa
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_timer
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/computer_alsa_sequencer
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_playback_1
D: module-hal-detect.c: Loading module-alsa-sink with arguments 'device_id=0 sink_name=alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0'
D: alsa-util.c: Trying front:0...
I: module-alsa-sink.c: Successfully opened device front:0.
I: module-alsa-sink.c: Successfully enabled mmap() mode.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: Bestand of map bestaat niet
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Master".
I: sink.c: Created sink 0 "alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0" with sample spec "s16le 2ch 44100Hz"
I: source.c: Created source 0 "alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0.monitor" with sample spec "s16le 2ch 44100Hz"
I: module-alsa-sink.c: Using 8 fragments of size 1792 bytes.
I: alsa-util.c: ALSA device lacks independant volume controls for each channel, falling back to software volume control.
D: module-alsa-sink.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+29
I: module-alsa-sink.c: Starting playback.
I: module.c: Loaded "module-alsa-sink" (index: #0; argument: "device_id=0 sink_name=alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0").
D: module-hal-detect.c: Loading module-alsa-source with arguments 'device_id=0 source_name=alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0'
D: alsa-util.c: Trying front:0...
I: module-alsa-source.c: Successfully opened device front:0.
I: module-alsa-source.c: Successfully enabled mmap() mode.
ALSA lib control.c:909:(snd_ctl_open_noupdate) Invalid CTL front:0
I: alsa-util.c: Unable to attach to mixer front:0: Bestand of map bestaat niet
I: alsa-util.c: Successfully attached to mixer 'hw:0'
I: alsa-util.c: Using mixer control "Capture".
I: source.c: Created source 1 "alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0" with sample spec "s16le 2ch 44100Hz"
I: module-alsa-source.c: Using 8 fragments of size 1792 bytes.
I: alsa-util.c: All 2 channels can be mapped to mixer channels. Using hardware volume control.
D: module-alsa-source.c: Thread starting up
D: rtpoll.c: Acquired POSIX realtime signal SIGRTMIN+28
I: module.c: Loaded "module-alsa-source" (index: #1; argument: "device_id=0 source_name=alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0").
D: module-hal-detect.c: Not loaded device /org/freedesktop/Hal/devices/pci_8086_293e_sound_card_0_alsa_control__1
I: module-hal-detect.c: Loaded 2 modules.
I: module.c: Loaded "module-hal-detect" (index: #2; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so': success
I: module.c: Loaded "module-esound-protocol-unix" (index: #3; argument: "").
I: protocol-native.c: loading cookie from disk.
I: module.c: Loaded "module-native-protocol-unix" (index: #4; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-gconf.so': success
I: module.c: Loaded "module-gconf" (index: #5; argument: "").
I: module.c: Loaded "module-volume-restore" (index: #6; argument: "").
D: module-default-device-restore.c: Restored default sink 'alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0'.
D: core-subscribe.c: dropped redundant event.
D: module-default-device-restore.c: Restored default source 'alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0'.
I: module.c: Loaded "module-default-device-restore" (index: #7; argument: "").
I: module.c: Loaded "module-rescue-streams" (index: #8; argument: "").
D: module-suspend-on-idle.c: Sink alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0 becomes idle.
D: module-suspend-on-idle.c: Source alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0.monitor becomes idle.
D: module-suspend-on-idle.c: Source alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0 becomes idle.
I: module.c: Loaded "module-suspend-on-idle" (index: #9; argument: "").
D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9/modules/module-x11-publish.so': success
D: module-x11-publish.c: using already loaded auth cookie.
I: module.c: Loaded "module-x11-publish" (index: #10; argument: "").
I: main.c: Daemon startup complete.
D: module-hal-detect.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
I: module-suspend-on-idle.c: Source alsa_input.pci_8086_293e_sound_card_0_alsa_capture_0 idle for too long, suspending ...
I: module-alsa-source.c: Device suspended...
I: module-suspend-on-idle.c: Source alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0.monitor idle for too long, suspending ...
I: module-suspend-on-idle.c: Sink alsa_output.pci_8086_293e_sound_card_0_alsa_playback_0 idle for too long, suspending ...
I: module-alsa-sink.c: Device suspended...
Ik zie een aantal foutmeldingen, maar ik ben er niet veel wijzer van geworden. Hopelijk zie jij het probleem nu? Uiteraard voer ik steeds updates uit.
By the way, hoe zet ik pulseaudio weer aan?
canti
