Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Beryl  (gelezen 3077 keer)

angerfistenator

  • Gast
Beryl
« Gepost op: 2007/03/21, 23:02:42 »
Hoi ik had beryl werken :P echt vet cool
Maar als ik beryl nu wil starten dan krijg ik dit als error:

Citaat
angerfistenator@angerfistenator-:~$ sudo beryl
XGL Present
beryl: GLX_EXT_texture_from_pixmap is missing
beryl: Using non-tfp mode
beryl: No GLXFBConfig for default depth, falling back on visinfo.
Reloading options
beryl: water: GL_ARB_fragment_program is missing
beryl: dbus_bus_get error: No reply within specified time
beryl: Plugin 'dbus':initDisplay failed
beryl: Couldn't activate plugin 'dbus'
Couldn't initialise dbus. This should not happen!
[Snow]: Loaded Texture /usr/share/beryl/snowflake2.png
[Snow]: Loaded Texture /usr/share/beryl/snowflake2.png
Initiating splash
No framebuffer_object support! (only simple blur aviable)
No fragment_program support! (only simple blur aviable)
No packed_depth_stencil support! (this may cause some artefacts in fbo mode)
Toen ik de eerste keer beryl starte was beryl active werkend ''Is het normaal dat het terminal venster dan open moet blijven? ,Want als ik het venster sluit stop berly ook.
Maar ja  :( nu doet hij het helemaal niet meer.. is dit een error die door mijn instellingen veroorzaakt word ?.

Alvast bedankt.
Michael

Offline Johan van Dijk

  • Administrator
    • johanvandijk
Beryl
« Reactie #1 Gepost op: 2007/03/21, 23:12:41 »
Waarom start je beryl als root?
Dat is helemaal nergens voor nodig, gevaarlijk, en je kan er instellingen mee verknoeien.


Druk op alt-f2 en voer beryl-manager uit, en stel alles goed in.
Dan zou het moeten werken.

angerfistenator

  • Gast
Beryl
« Reactie #2 Gepost op: 2007/03/21, 23:20:32 »
Jah oke al weer wat geleerd.. het werkt alleen krijg ik nu een cube met aan vierkanten een wit scherm.

Offline siegi

  • Lid
Beryl
« Reactie #3 Gepost op: 2007/03/22, 00:04:09 »
ik zou de file .beryl even wissen.  
In terminal
sudo rm -r .beryl  
Aangezien je beryl als root hebt gedraait zitten de rechten daar ook niet meer goed.

angerfistenator

  • Gast
Beryl
« Reactie #4 Gepost op: 2007/03/22, 00:21:40 »
Citaat van: siegi
ik zou de file .beryl even wissen.  
In terminal
sudo rm -r .beryl  
Aangezien je beryl als root hebt gedraait zitten de rechten daar ook niet meer goed.
Ok Thx ;)

angerfistenator

  • Gast
Beryl
« Reactie #5 Gepost op: 2007/03/22, 01:38:20 »
Hey ik heb het eindelijk opgelost :)  ik druk alt+f2   en dan typ je: beryl (niet beryl-manager)  ik vind beryl ook echt wel M A S T E R  V E T.

Mensen ik wil jullie ff  zeggen
dat jullie  tegen over een windows forum, naar mijn gevoel heel erg behulpzaam zijn met linux probleempjes of info.
Ik zelf ben ook sins kort totaal over gestapt van Box-windows naar de Linux world ik begon met twijfels maar die waren door dit forum zo weg :)
NOOIT MEER ALS HOOFD SYSTEEM WINDOWS DRAAIEN..!!
 
Bedankt voor de info

Offline Soul-Sing

  • Lid
Beryl
« Reactie #6 Gepost op: 2007/03/22, 09:13:18 »
Citaat van: angerfistenator
Hey ik heb het eindelijk opgelost :)  ik druk alt+f2   en dan typ je: beryl (niet beryl-manager)  ik vind beryl ook echt wel M A S T E R  V E T.

Mensen ik wil jullie ff  zeggen
dat jullie  tegen over een windows forum, naar mijn gevoel heel erg behulpzaam zijn met linux probleempjes of info.
Ik zelf ben ook sins kort totaal over gestapt van Box-windows naar de Linux world ik begon met twijfels maar die waren door dit forum zo weg :)
NOOIT MEER ALS HOOFD SYSTEEM WINDOWS DRAAIEN..!!
 
Bedankt voor de info
prachtig he BERYL! :D

angerfistenator

  • Gast
Beryl
« Reactie #7 Gepost op: 2007/03/22, 11:26:38 »
Dat is idd het woord er voor..!

Ik heb nog een vraag je hier over ,Ik was bezig  met  Emerald theme manager maar alles wat ik daar mee kan doen werkt niet teminsten  er veranderd niks in beryl.
En toen ben ik gaan zoeken met google onder themes en vond ik dit als theme manager.

Citaat
sudo apt-get install aquamarine
Now lets add some lines to xorg.conf to make it work with beryl. You need to stop X11, so you can type in the terminal “sudo /etc/init.d/gdm stop�  and you wil be placed at a terminal wihtout X11 (if you don’t get to the terminal hit cntrl+alt+F1). Then type
Citaat
sudo nvidia-xconfig --add-argb-glx-visuals
Now reboot or start X and then type in the terminal
beryl-manager

Er ging iets mis toen ik dit in typte:
Citaat
sudo /etc/init.d/gdm stop
En nu krijg ik dit te zien  als ik bvb wil update''

Citaat
sudo: unable to lookup (none) via gethostbyname()
wat kan ik doen om het weer goed terug te zetten ? ..

Offline Soul-Sing

  • Lid
Beryl
« Reactie #8 Gepost op: 2007/03/22, 11:36:45 »
Citaat
gedit /etc/X11/xorg.conf
in de terminal. uitkomst hier posten.

angerfistenator

  • Gast
Beryl
« Reactie #9 Gepost op: 2007/03/22, 11:42:23 »
Citaat van: leoquant
Citaat
gedit /etc/X11/xorg.conf
in de terminal. uitkomst hier posten.
Citaat
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc104"
   Option      "XkbLayout"   "us"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "NVIDIA Corporation NVIDIA Default Card"
   Driver      "nvidia"
   BusID      "PCI:1:0:0"
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
   HorizSync   28-51
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "NVIDIA Corporation NVIDIA Default Card"
   Monitor      "Generic Monitor"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

Offline Soul-Sing

  • Lid
Beryl
« Reactie #10 Gepost op: 2007/03/22, 12:02:11 »
in je X zie ik geen vreemde dingen, terwijl je er toch iets aan toegevoegd hebt.

misschien geeft
Citaat
glxinfo
meer te zien.

overigens geeft: sudo: unable to lookup (none) via gethostbyname() in GOOGLE geen eenduidige oplossingen...helaas.

angerfistenator

  • Gast
Beryl
« Reactie #11 Gepost op: 2007/03/22, 12:51:37 »
Hier komt tie dan ....:P waar kijk je nu eigenlijk na standaard ?.

Citaat
angerfistenator@(none):~$ glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: No
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_OML_swap_method, GLX_SGI_make_current_read,
    GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier,
    GLX_SGIX_fbconfig, GLX_EXT_texture_from_pixmap
client glx vendor string: NVIDIA Corporation
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_visual_info,
    GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_SGI_video_sync,
    GLX_NV_swap_group, GLX_NV_video_out, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGI_swap_control, GLX_NV_float_buffer, GLX_ARB_fbconfig_float
GLX version: 1.2
GLX extensions:
    GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
    GLX_EXT_import_context, GLX_SGIX_fbconfig, GLX_ARB_get_proc_address
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 7600 GS/AGP/SSE2
OpenGL version string: 1.2 (2.0.2 NVIDIA 87.76)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_imaging, GL_ARB_multitexture,
    GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shadow,
    GL_ARB_texture_border_clamp, GL_ARB_texture_cube_map,
    GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_window_pos, GL_ARB_texture_non_power_of_two, GL_EXT_abgr,
    GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_draw_range_elements,
    GL_EXT_fog_coord, GL_EXT_multi_draw_arrays, GL_EXT_packed_pixels,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
    GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod,
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
    GL_ATI_texture_mirror_once, GL_HP_occlusion_test,
    GL_IBM_texture_mirrored_repeat, GL_NV_blend_square,
    GL_NV_texgen_reflection, GL_NV_texture_rectangle,
    GL_NV_texture_env_combine4, GL_SGIS_generate_mipmap, GL_SGIS_texture_lod,
    GL_SGIX_depth_texture, GL_SGIX_shadow
glu version: 1.3
glu extensions:
    GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess

   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x2c 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x2d 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x2e 32 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 Ncon
0x2f 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 Ncon
angerfistenator@(none):~$

Dennis_L

  • Gast
Beryl
« Reactie #12 Gepost op: 2007/03/22, 13:00:22 »
angerfistenator@(none)

@(none) ???

sudo gedit /etc/hostname
en
sudo gedit /etc/hosts

wat staat daarin?

angerfistenator

  • Gast
Beryl
« Reactie #13 Gepost op: 2007/03/22, 13:31:15 »
angerfistenator@(none):~$ gedit /etc/hosts127.0.0.1 localhost
127.0.1.1 angerfistenator-

# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

 angerfistenator@(none):~$ gedit /etc/hostnamehier staat niks.

maar wat heeft het eigenlijk met me host name te maken dan ?

Dennis_L

  • Gast
Beryl
« Reactie #14 Gepost op: 2007/03/22, 13:39:34 »
Citaat van: angerfistenator
angerfistenator@(none):~$ gedit /etc/hosts127.0.0.1 localhost
127.0.1.1 angerfistenator-

# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

 angerfistenator@(none):~$ gedit /etc/hostnamehier staat niks.

maar wat heeft het eigenlijk met me host name te maken dan ?
je hostname lijkt weg te zijn

sudo gedit /etc/hostname
en vul daar angerfistenator- (ik neem aan dat dat je hostname was)
en daarna ff een rebootje

angerfistenator

  • Gast
Beryl
« Reactie #15 Gepost op: 2007/03/22, 13:44:56 »
Citaat van: Dennis_L
je hostname lijkt weg te zijn

sudo gedit /etc/hostname
en vul daar angerfistenator- (ik neem aan dat dat je hostname was)
en daarna ff een rebootje
als ik sudo er bij typ dan krijg ik dit bij alle commands met sudo''dus ik kan het niet opslaan.. :(
sudo: unable to lookup (none) via gethostbyname()
angerfistenator@(none):~$

Dennis_L

  • Gast
Beryl
« Reactie #16 Gepost op: 2007/03/22, 13:49:48 »
Citaat van: angerfistenator
Citaat van: Dennis_L
je hostname lijkt weg te zijn

sudo gedit /etc/hostname
en vul daar angerfistenator- (ik neem aan dat dat je hostname was)
en daarna ff een rebootje
als ik sudo er bij typ dan krijg ik dit bij alle commands met sudo''dus ik kan het niet opslaan.. :(
sudo: unable to lookup (none) via gethostbyname()
angerfistenator@(none):~$
dan even in recovery mode opstarten en dan met vi proberen

Offline Soul-Sing

  • Lid
Beryl
« Reactie #17 Gepost op: 2007/03/22, 13:50:00 »
argb-glx-visuals zijn idd geinstalled lijkt me. maar ken het niet uit eigen ervaring.

Dennis_L

  • Gast
Beryl
« Reactie #18 Gepost op: 2007/03/22, 18:56:49 »
Lukt het angerfistenator ?

Offline Soul-Sing

  • Lid
Beryl
« Reactie #19 Gepost op: 2007/03/22, 19:06:23 »
Citaat van: Dennis_L
Lukt het angerfistenator ?
je haalt de woorden uit mijn mond...:)

Offline bartek

  • Lid
    • http://bartek.blogsome.com
Beryl
« Reactie #20 Gepost op: 2007/03/22, 20:05:11 »
Citaat van: angerfistenator
sudo: unable to lookup (none) via gethostbyname()
angerfistenator@(none):~$
Wat zegt:
sudo gedit /etc/hosts
| Deliberando saepe perit occasio |

"Car la vie est un bien perdu quand on n'a pas vécu comme on l'aurait voulu"

Dennis_L

  • Gast
Beryl
« Reactie #21 Gepost op: 2007/03/22, 20:12:37 »
Citaat van: bartek
Citaat van: angerfistenator
sudo: unable to lookup (none) via gethostbyname()
angerfistenator@(none):~$
Wat zegt:
sudo gedit /etc/hosts
psst moet je even het topic lezen ;)
in hosts staat ie nog wel, maar /etc/hostname is leeg

Offline bartek

  • Lid
    • http://bartek.blogsome.com
Beryl
« Reactie #22 Gepost op: 2007/03/22, 20:15:52 »
En wat zegt:
sudo gedit /etc/hostname

Deze was ik vergeten Dennis_L
| Deliberando saepe perit occasio |

"Car la vie est un bien perdu quand on n'a pas vécu comme on l'aurait voulu"

Dennis_L

  • Gast
Beryl
« Reactie #23 Gepost op: 2007/03/22, 20:20:37 »
Citaat van: bartek
En wat zegt:
sudo gedit /etc/hostname

Deze was ik vergeten Dennis_L
Nee lezen ;)

http://forum.ubuntu-nl.org/message/86397#p86397

het lukte hem niet om met sudo gedit /etc/hostname zn hostname weer in te vullen
dus daarom gevraagd of hij het in recoverymode met vi wilde proberen

angerfistenator

  • Gast
Beryl
« Reactie #24 Gepost op: 2007/03/23, 01:05:17 »
En wat zegt:
sudo gedit /etc/hostname

Daar  staat (read only)   kan er ook niks  opslaan .
En  ik recovery lukt het ook niet ...wat zou nog een optie kunnen zijn ?