$ hp-check -t Saving output in log file: /home/seghers/hp-check.logHP Linux Imaging and Printing System (ver. 3.15.6)Dependency/Version Check Utility ver. 15.1Copyright (c) 2001-15 Hewlett-Packard Development Company, LPThis software comes with ABSOLUTELY NO WARRANTY.This is free software, and you are welcome to distribute itunder certain conditions. See COPYING file for more details.Note: hp-check can be run in three modes:1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the abovecases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-versionwarning: linuxmint-17.2 version is not supported. Using linuxmint-17.1 versions dependencies to verify and install...---------------| SYSTEM INFO |--------------- Kernel: 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 GNU/Linux Host: seghers Proc: 3.16.0-38-generic #52~14.04.1-Ubuntu SMP Fri May 8 09:43:57 UTC 2015 GNU/Linux Distribution: linuxmint 17.2 Bitness: 64 bit-----------------------| HPLIP CONFIGURATION |-----------------------HPLIP-Version: HPLIP 3.15.6HPLIP-Home: /usr/share/hplipwarning: HPLIP-Installation: Auto installation is not supported for linuxmint distro 17.2 version Current contents of '/etc/hp/hplip.conf' file:# hplip.conf. Generated from hplip.conf.in by configure.[hplip]version=3.15.6[dirs]home=/usr/share/hpliprun=/var/runppd=/usr/share/ppd/HPppdbase=/usr/share/ppddoc=/usr/share/doc/hplip-3.15.6html=/usr/share/doc/hplip-3.15.6icon=/usr/share/applicationscupsbackend=/usr/lib/cups/backendcupsfilter=/usr/lib/cups/filterdrv=/usr/share/cups/drv/hpbin=/usr/bin# Following values are determined at configure time and cannot be changed.[configure]network-build=yeslibusb01-build=nopp-build=nogui-build=yesscanner-build=yesfax-build=yesdbus-build=yescups11-build=nodoc-build=yesshadow-build=nohpijs-install=nofoomatic-drv-install=nofoomatic-ppd-install=nofoomatic-rip-hplip-install=nohpcups-install=yescups-drv-install=yescups-ppd-install=nointernal-tag=3.15.6restricted-build=noui-toolkit=qt4qt3=noqt4=yespolicy-kit=nolite-build=noudev_sysfs_rules=nohpcups-only-build=nohpijs-only-build=noCurrent contents of '/var/lib/hp/hplip.state' file:Plugins are not installed. Could not access file: Bestand of map bestaat nietCurrent contents of '~/.hplip/hplip.conf' file:[upgrade]notify_upgrade = truelast_upgraded_time = 1436001600pending_upgrade_time = 0latest_available_version = 3.15.6[settings]systray_visible = 0systray_messages = 0[last_used]device_uri = "hp:/usb/Officejet_Pro_8600?serial=CN2BJB3J4K05KD"printer_name = HP-Officejet-Pro-8600working_dir = .[commands]scan = /usr/bin/xsane -V %SANE_URI%[refresh]rate = 30enable = falsetype = 1[polling]enable = falseinterval = 5device_list = [fax]voice_phone = email_address = [installation]date_time = 04-07-15 12:41:24version = 3.15.6 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>--------------------------| External Dependencies |-------------------------- gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.10 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.23 OK - xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.998 OK - cups CUPS - Common Unix Printing System REQUIRED 1.1 1.7.2 OK 'CUPS Scheduler is running' policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.15 OK - avahi-utils avahi-utils OPTIONAL - 0.6.31 OK - dbus DBus - Message bus system REQUIRED - 1.6.18 OK --------------------------| General Dependencies |------------------------- libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.0.1 OK - python-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.0 OK - reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.0 OK - python-notify Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 4.10.4 OK - python-xml Python XML libraries REQUIRED - 2.1.0 OK - libusb libusb - USB library REQUIRED - 1.0 OK - cups-image CUPS image - CUPS image development files REQUIRED - 1.7.2 OK - libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.7.2 OK - sane-devel SANE - Scanning library development files REQUIRED - 1.0.23 OK - pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 1.1.7 OK - python2X Python 2.2 or greater - Python programming language REQUIRED 2.2 2.7.6 OK - pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 REQUIRED 4.0 4.10.4 OK - libjpeg libjpeg - JPEG library REQUIRED - - OK - libpthread libpthread - POSIX threads library REQUIRED - 2.19 OK - python-devel Python devel - Python development files REQUIRED 2.2 2.7.6 OK - cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 1.7.2 OK - sane SANE - Scanning library REQUIRED - 1.0.23 OK ----------------| COMPILEDEP |--------------- libtool libtool - Library building support services REQUIRED - 2.4.2 OK - gcc gcc - GNU Project C and C++ Compiler REQUIRED - 4.8.4 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 3.81 OK -----------------------| Python Extentions |---------------------- cupsext CUPS-Extension REQUIRED - 3.15.6 OK - hpmudext IO-Extension REQUIRED - 3.15.6 OK ------------------------| Scan Configuration |----------------------- scanext Scan-SANE-Extension REQUIRED - 3.15.6 OK - hpaio HPLIP-SANE-Backend REQUIRED - 3.15.6 OK 'hpaio found in /etc/sane.d/dll.conf'-----------------------| Other Dependencies |-----------------------------------------------------| DISCOVERED SCANNER DEVICES |------------------------------device `hpaio:/usb/Officejet_Pro_8600?serial=CN2BJB3J4K05KD' is a Hewlett-Packard Officejet_Pro_8600 all-in-one--------------------------| DISCOVERED USB DEVICES |-------------------------- Device URI Model ----------------------------------------- --------------------- hp:/usb/Officejet_Pro_8600?serial=CN2BJB3 HP Officejet Pro 8600 J4K05KD ---------------------------------| INSTALLED CUPS PRINTER QUEUES |--------------------------------- HP-Officejet-Pro-8600---------------------Type: PrinterDevice URI: hp:/usb/Officejet_Pro_8600?serial=CN2BJB3J4K05KDPPD: /etc/cups/ppd/HP-Officejet-Pro-8600.ppdPPD Description: HP Officejet Pro 8600, hpcups 3.15.2Printer status: printer HP-Officejet-Pro-8600 now printing HP-Officejet-Pro-8600-560. enabled since za 04 jul 20Rendering completedCommunication status: GoodOfficejet-Pro-8600-FAX----------------------Type: UnknownDevice URI: usb://HP/Officejet%20Pro%208600%20FAX?serial=CN2BJB3J4K05KD&interface=3PPD: /etc/cups/ppd/Officejet-Pro-8600-FAX.ppdPPD Description: HP Officejet Pro 8600, hpcups 3.15.4Printer status: printer Officejet-Pro-8600-FAX is idle. enabled since za 04 jul 2015 11:09:43 CESTwarning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.--------------| PERMISSION |--------------USB HP-Officejet-Pro-8600 Required - - OK Node:'/dev/bus/usb/001/004' Perm:' root lp rw- rw- rw- rw- r--' -----------| SUMMARY |-----------Missing Required Dependencies-----------------------------NoneMissing Optional Dependencies-----------------------------NoneTotal Errors: 0Total Warnings: 1Done.