Hallo Johan,
Ik heb dmesg uitgeprobeert. Kan er echter geen echte foutmeldingen uithalen. Het stukje van de netwerkkaart heb ik gekopieerd:
16.725137] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 16.725141] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.725145] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.725148] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.725151] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 16.725155] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 16.725158] cfg80211: Calling CRDA for country: US
[ 16.764878] Atheros(R) L2 Ethernet Driver - version 2.0.4
[ 16.764883] Copyright (c) 2007 Atheros Corporation.
[ 16.765942] atl2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 16.765960] atl2 0000:06:00.0: setting latency timer to 64
[ 16.885584] ath5k_pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.885599] ath5k_pci 0000:02:00.0: setting latency timer to 64
[ 16.885642] ath5k_pci 0000:02:00.0: registered as 'phy0'
[ 17.002085] phy0: Selected rate control algorithm 'pid'
[ 17.698832] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 18.480548] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 19.380275] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]
[ 19.380282] ACPI: Device needs an ACPI driver
[ 19.380297] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Ik neem aan dat /var/log, var/log/syslog en /var/log/messages begint met dmesg. Dus dmesg/var/log etc.
Als ik dat doe krijg ik de melding file not found.
Groet, Remco