Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: TV out bij een Toshiba Satellite  (gelezen 1285 keer)

TV out bij een Toshiba Satellite
« Gepost op: 2007/03/17, 09:03:51 »
Hoi,

Ik heb een Toshiba Satellite met een TV-out die ik niet goed aan de praat krijg. Eerst heb ik mij suf gezocht om de TV-out aan de praat te krijgen door een driver te vinden maar dit lukte niet. Toen kwam de verrassing! In synaptic heb ik een tool gevonden 'fnfxd'. Dit dient om mijn laptop-eigen toetsen te kunnen gebruiken. Eén van die toetsen is het wisselen tussen LCD,CRT en TV. Grappig genoeg werkt die toets en heb ik TV-out (met een cleaninstall feisty) :)

Spijtig genoeg is signaal niet geschikt voor mijn TV. Het beeld is heel vervormd. :(

Ik moet ergens nog kunnen opgeven welk signaal de tv-out moet gebruiken (PAL, ...) Weet iemand hoe ik dit moet doen?

Alvast bedankt.

PS:
systeem...
PIV 2,8 GHz
Mijn grafische kaart is een 'Trident cyberblade' onboard.
Ik gebruik de Trident-driver megeleverd met ubuntu.

PPS: Mijn Direct rendering werkt ook nog niet maar op google heb ik al gevonden dat dit ook niet gaat (de combinatie trident - xorg) moest er toch een wizz-kid zijn die een oplossing weet...

madberry

  • Gast
TV out bij een Toshiba Satellite
« Reactie #1 Gepost op: 2007/03/17, 10:07:56 »
Citaat van: dramaekers
Spijtig genoeg is signaal niet geschikt voor mijn TV. Het beeld is heel vervormd. :(
Kun je de Xorg hier is effe posten?

TV out bij een Toshiba Satellite
« Reactie #2 Gepost op: 2007/03/17, 10:18:58 »
Citaat van: madberry
Citaat van: dramaekers
Spijtig genoeg is signaal niet geschikt voor mijn TV. Het beeld is heel vervormd. :(
Kun je de Xorg hier is effe posten?
dominique@Satellite:~$ cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath        "/usr/share/fonts/X11/misc"
        FontPath        "/usr/share/fonts/X11/cyrillic"
        FontPath        "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath        "/usr/share/fonts/X11/Type1"
        FontPath        "/usr/share/fonts/X11/100dpi"
        FontPath        "/usr/share/fonts/X11/75dpi"
        # path to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "record"
        Load    "v4l"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "be"
        Option          "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/wacom"    # Change to
                                                        # /dev/input/event
                                                        # for USB
        Option          "Type"          "stylus"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/wacom"    # Change to
                                                        # /dev/input/event
                                                        # for USB
        Option          "Type"          "eraser"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/wacom"    # Change to
                                                        # /dev/input/event
                                                        # for USB
        Option          "Type"          "cursor"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "Generieke videokaart"
        Driver          "trident"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "Generieke beeldscherm"
        Option          "DPMS"
        HorizSync       30-70
        VertRefresh     50-160
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Generieke videokaart"
        Monitor         "Generieke beeldscherm"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "1024x768" "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "stylus"        "SendCoreEvents"
        InputDevice     "cursor"        "SendCoreEvents"
        InputDevice     "eraser"        "SendCoreEvents"
        InputDevice     "Synaptics Touchpad"
EndSection

Section "DRI"
        Mode    0666
EndSection
dominique@Satellite:~$

madberry

  • Gast
TV out bij een Toshiba Satellite
« Reactie #3 Gepost op: 2007/03/17, 10:25:11 »
Citaat van: dramaekers
Section "Device"
        Identifier      "Generieke videokaart"
        Driver          "trident"
        BusID           "PCI:1:0:0"
EndSection
In dit gedeelte even de volgende code bij plakken.....
Option "TVOutFormat" "SVIDEO" #or  Composite etc
Option "TVStandard" "PAL-G" #or NTSC etc
Deze twee opties goed instellen en dan zou het zonder probleem moeten werken.....

Edit: Ik geloof dat het PAL-B is maar dat moet je zeker een heel eind de goede richting in helpen...

from https://help.ubuntu.com/community/NvidiaTVOut : PAL-B = Australia, Belgium, Denmark, Finland, Germany, Nederland....

Offline Duckie

  • Lid
TV out bij een Toshiba Satellite
« Reactie #4 Gepost op: 2007/03/17, 13:27:36 »
Ik heb zelf ook een Satellite, maar ben nog niet bezig geweest om deze op de tv aan te sluiten.
Wel zag ik dat ik in de BIOS in kan stellen welk signaal er gestuurd moet worden. (PAL of NTSC(
Misschien is dat bij jou ook zo?
____________________________________________

TV out bij een Toshiba Satellite
« Reactie #5 Gepost op: 2007/03/18, 21:42:25 »
Citaat van: Duckie
Ik heb zelf ook een Satellite, maar ben nog niet bezig geweest om deze op de tv aan te sluiten.
Wel zag ik dat ik in de BIOS in kan stellen welk signaal er gestuurd moet worden. (PAL of NTSC(
Misschien is dat bij jou ook zo?
Vroeger (in windows) werkte het ook met de huidige instelling in mijn BIOS dus het zou nu (in Ubuntu) ook moeten lukken niet?
Ik heb wel de NTSC-instelling in de BIOS geprobeert om te kijken wat dat geeft maar dit maakte het niet beter. Naderhand wist ik dat dit logisch is omdat mijn DVD-speler op PAL ingesteld staat.
Nu wil mijn wedere helft TV kijken dus het zal even moeten wachten...

Alvast bedankt erg bedankt voor de hulp ;)

madberry

  • Gast
TV out bij een Toshiba Satellite
« Reactie #6 Gepost op: 2007/03/19, 20:44:53 »
zoals ik al zei in mijn eerdere post je moet even de xorg.conf naar behoren aan passen....