Bedoel je dit ?
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
[ 0.000000] BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
[ 0.000000] BIOS-e820: 0000000001000000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5bc0
[ 0.000000] Entering add_active_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F77B0 checksum 0
[ 0.000000] ACPI: RSDP 000F77B0, 0014 (r0 IntelR)
[ 0.000000] ACPI: RSDT 0FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 38D5 (r1 INTELR AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] ACPI: APIC 0FFF69C0, 0054 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:1 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
[ 0.000000] Built 1 zonelists. Total pages: 65009
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1816.874 MHz processor.
[ 47.896291] Console: colour VGA+ 80x25
[ 47.896628] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 47.896923] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 47.908868] Memory: 247172k/262080k available (2015k kernel code, 13432k reserved, 916k data, 364k init, 0k highmem)
[ 47.908884] virtual kernel memory layout:
[ 47.908885] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 47.908887] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 47.908890] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 47.908892] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 47.908894] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 47.908896] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 47.908897] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 47.908902] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 47.908965] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 47.988912] Calibrating delay using timer specific routine.. 3637.54 BogoMIPS (lpj=7275086)
[ 47.988954] Security Framework v1.0.0 initialized
[ 47.988966] SELinux: Disabled at boot.
[ 47.988985] Mount-cache hash table entries: 512
[ 47.989225] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 47.989245] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 47.989249] CPU: L2 cache: 256K
[ 47.989253] CPU: Hyper-Threading is disabled
[ 47.989256] CPU: After all inits, caps: 3febfbff 00000000 00000000 0000b080 00000000 00000000 00000000
[ 47.989283] Compat vDSO mapped to ffffe000.
[ 47.989306] Checking 'hlt' instruction... OK.
[ 48.005106] SMP alternatives: switching to UP code
[ 48.005529] Freeing SMP alternatives: 11k freed
[ 48.006085] Early unpacking initramfs... done
[ 48.493943] ACPI: Core revision 20070126
[ 48.494054] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 48.497934] CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
[ 48.497997] Total of 1 processors activated (3637.54 BogoMIPS).
[ 48.498150] ENABLING IO-APIC IRQs
[ 48.498363] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 48.644313] Brought up 1 CPUs
[ 48.644543] Booting paravirtualized kernel on bare hardware
[ 48.644647] Time: 16:43:42 Date: 00/19/108
[ 48.644707] NET: Registered protocol family 16
[ 48.644924] EISA bus registered
[ 48.644951] ACPI: bus type pci registered
[ 48.670331] PCI: PCI BIOS revision 2.10 entry at 0xfb0d0, last bus=2
[ 48.670334] PCI: Using configuration type 1
[ 48.670337] Setting up standard PCI resources
[ 48.677038] ACPI: EC: Look up EC in DSDT
[ 48.682106] ACPI: Interpreter enabled
[ 48.682116] ACPI: (supports S0 S1 S5)
[ 48.682142] ACPI: Using IOAPIC for interrupt routing
[ 48.690756] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 48.690768] PCI: Probing PCI hardware (bus 00)
[ 48.691085] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 48.691091] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 48.691806] PCI: Transparent bridge - 0000:00:1e.0
[ 48.691852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 48.692087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 48.710209] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 48.710365] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 48.710514] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 48.710663] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 48.710812] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 48.710962] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 48.711111] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 48.711261] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 48.711483] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 48.711507] pnp: PnP ACPI init
[ 48.711528] ACPI: bus type pnp registered
[ 48.716599] pnp: PnP ACPI: found 12 devices
[ 48.716606] ACPI: ACPI bus type pnp unregistered
[ 48.716614] PnPBIOS: Disabled by ACPI PNP
[ 48.716738] PCI: Using ACPI for IRQ routing
[ 48.716744] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 48.730838] NET: Registered protocol family 8
[ 48.730841] NET: Registered protocol family 20
[ 48.731022] pnp: 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 48.731028] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 48.731032] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 48.731036] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 48.732162] Time: tsc clocksource has been installed.
[ 48.761685] PCI: Bridge: 0000:00:01.0
[ 48.761688] IO window: disabled.
[ 48.761695] MEM window: ec000000-edffffff
[ 48.761700] PREFETCH window: e0000000-e7ffffff
[ 48.761707] PCI: Bridge: 0000:00:1e.0
[ 48.761711] IO window: c000-cfff
[ 48.761718] MEM window: ee000000-efffffff
[ 48.761724] PREFETCH window: 20000000-200fffff
[ 48.761748] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 48.761774] NET: Registered protocol family 2
[ 48.800193] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 48.800286] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 48.800425] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 48.800527] TCP: Hash tables configured (established 8192 bind 8192)
[ 48.800531] TCP reno registered
[ 48.812361] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
[ 49.266707] it is
[ 49.784116] Freeing initrd memory: 7305k freed
[ 49.784947] audit: initializing netlink socket (disabled)
[ 49.784976] audit(1200761022.720:1): initialized
[ 49.789044] VFS: Disk quotas dquot_6.5.1
[ 49.789175] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 49.789424] io scheduler noop registered
[ 49.789428] io scheduler anticipatory registered
[ 49.789431] io scheduler deadline registered
[ 49.789482] io scheduler cfq registered (default)
[ 49.789545] Boot video device is 0000:01:00.0
[ 49.789900] isapnp: Scanning for PnP cards...
[ 50.143850] isapnp: No Plug & Play device found
[ 50.243372] Real Time Clock Driver v1.12ac
[ 50.243547] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 50.243674] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 50.244221] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 50.245967] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 50.246808] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 50.248498] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 50.248969] input: Macintosh mouse button emulation as /class/input/input0
[ 50.249140] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 50.249145] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 50.502660] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 50.503038] mice: PS/2 mouse device common for all mice
[ 50.503302] EISA: Probing bus 0 at eisa.0
[ 50.503349] EISA: Detected 0 cards.
[ 50.503540] TCP cubic registered
[ 50.503573] NET: Registered protocol family 1
[ 50.503621] Using IPI No-Shortcut mode
[ 50.503934] Magic number: 8:776:742
[ 50.505107] Freeing unused kernel memory: 364k freed
[ 50.530312] input: AT Translated Set 2 keyboard as /class/input/input1
[ 51.930905] AppArmor: AppArmor initialized<5>audit(1200761024.720:2): type=1505 info="AppArmor initialized" pid=1170
[ 51.947034] fuse init (API version 7.8)
[ 51.958721] Failure registering capabilities with primary security module.
[ 51.977455] ACPI: Fan [FAN] (on)
[ 51.987871] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 51.990348] ACPI: Thermal Zone [THRM] (40 C)
[ 53.319112] SCSI subsystem initialized
[ 53.329490] libata version 2.21 loaded.
[ 53.336140] ata_piix 0000:00:1f.1: version 2.11
[ 53.336251] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 53.336429] scsi0 : ata_piix
[ 53.336533] scsi1 : ata_piix
[ 53.336709] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
[ 53.336715] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
[ 53.384237] usbcore: registered new interface driver usbfs
[ 53.384293] usbcore: registered new interface driver hub
[ 53.384348] usbcore: registered new device driver usb
[ 53.386221] USB Universal Host Controller Interface driver v3.0
[ 53.443373] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 53.650224] Floppy drive(s): fd0 is 1.44M
[ 53.654881] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 53.716716] FDC 0 is a post-1991 82077
[ 53.826620] ata1.00: configured for UDMA/33
[ 54.421728] end_request: I/O error, dev fd0, sector 0
[ 55.480534] end_request: I/O error, dev fd0, sector 0
[ 56.539330] end_request: I/O error, dev fd0, sector 0
[ 57.598135] end_request: I/O error, dev fd0, sector 0
[ 58.656933] end_request: I/O error, dev fd0, sector 0
[ 59.016514] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 59.715737] end_request: I/O error, dev fd0, sector 0
[ 60.774535] end_request: I/O error, dev fd0, sector 0
[ 61.833340] end_request: I/O error, dev fd0, sector 0
[ 62.892137] end_request: I/O error, dev fd0, sector 0
[ 63.827065] ata2: SRST failed (errno=-16)
[ 63.950940] end_request: I/O error, dev fd0, sector 0
[ 63.996333] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[ 63.997393] ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 19 (level, low) -> IRQ 16
[ 63.997418] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 63.997425] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 63.998128] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 63.998181] uhci_hcd 0000:00:1f.2: irq 16, io base 0x0000d000
[ 63.999219] usb usb1: configuration #1 chosen from 1 choice
[ 63.999602] hub 1-0:1.0: USB hub found
[ 63.999624] hub 1-0:1.0: 2 ports detected
[ 64.021974] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 64.021985] Uniform CD-ROM driver Revision: 3.20
[ 64.022468] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 64.032085] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 64.103904] ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 17
[ 64.103927] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[ 64.103934] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 64.103993] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 64.104032] uhci_hcd 0000:00:1f.4: irq 17, io base 0x0000d800
[ 64.104216] usb usb2: configuration #1 chosen from 1 choice
[ 64.104265] hub 2-0:1.0: USB hub found
[ 64.104284] hub 2-0:1.0: 2 ports detected
[ 64.207070] 8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 64.207079] 8139cp 0000:02:02.0: Try the "8139too" driver instead.
[ 64.210435] 8139too Fast Ethernet driver 0.9.28
[ 64.210534] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 64.210987] eth0: RealTek RTL8139 at 0xd0850000, 00:16:0a:07:7a:cc, IRQ 18
[ 64.210991] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 64.346484] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 64.512863] usb 1-1: configuration #1 chosen from 1 choice
[ 64.538622] usbcore: registered new interface driver hiddev
[ 64.556590] input: Logitech as /class/input/input2
[ 64.556953] input: USB HID v1.00 Mouse [Logitech] on usb-0000:00:1f.2-1
[ 64.556985] usbcore: registered new interface driver usbhid
[ 64.556991] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 65.009738] end_request: I/O error, dev fd0, sector 0
[ 65.634954] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 65.669599] ISO 9660 Extensions: RRIP_1991A
[ 65.973940] Registering unionfs 1.4
[ 65.973947] unionfs: debugging is not enabled
[ 65.995976] loop: module loaded
[ 66.319440] squashfs: version 3.2-UBUNTU (2007/07/26) Phillip Lougher
[ 119.743288] Linux agpgart interface v0.102 (c) Dave Jones
[ 119.875532] agpgart: Detected an Intel 845G Chipset.
[ 119.879535] agpgart: AGP aperture is 64M @ 0xe8000000
[ 119.919053] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 119.932846] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 119.990314] iTCO_vendor_support: vendor-support=0
[ 119.992142] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 119.992277] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 119.992288] iTCO_wdt: No card detected
[ 120.056120] intel_rng: FWH not detected
[ 121.362312] input: PC Speaker as /class/input/input3
[ 121.425621] parport_pc 00:0a: reported by Plug and Play ACPI
[ 121.425675] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 121.875364] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 19
[ 121.878909] ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 18 (level, low) -> IRQ 19