http://ubuntuforums.org/showthread.php?p=6539773Hier ligt mogelijk een oplossing.........
Alleen krijg ik een foutmelding bij de laatste handelingen:
sudo su
# cd /usr/bin
# mv cdrecord cdrecord.wodim
# mv mkisofs mkisofs.genisoimage
root@mediacenter:/usr/bin# mv cdrecord cdrecord.wodim
mv: kan status van ‘cdrecord’ niet opvragen: Bestand of map bestaat niet
Wat zou er dan mis zijn gegaan?
5. Look for /usr/bin/cdrecord and /usr/bin/mkisofs. Rename them (to circumvent the seek-and-destroy mechanisms of wodim and genisoimage packages)
Lijn 5 heb ik uitgevoerd met de code eronder.
cdrecord.real en mkisofs.real vind ik wel in usr/bin.
Logfile van K3B:
System
-----------------------
K3b Version: 1.0.4
KDE Version: 3.5.10
QT Version: 3.3.8b
Kernel: 2.6.24-23-rt
Devices
-----------------------
TSSTcorp CDDVDW SH-S202J SB02 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R sequentieel, DVD-R Dual Layer sequentieel, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW met beperkte overschrijving, DVD-RW sequentieel, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Beperkt overschrijven, Layer Jump]
Used versions
-----------------------
cdrecord: 1.1.6
cdrecord
-----------------------
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CDDVDW SH-S202J '
Revision : 'SB02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1962752 = 1916 KB
FIFO size : 12582912 = 12288 KB
pregap1: -1
Track 01: audio 41 MB (04:06.13) no preemp swab copy
Track 02: audio 35 MB (03:30.90) no preemp swab copy
Track 03: audio 43 MB (04:18.42) no preemp swab copy
Track 04: audio 30 MB (03:01.73) no preemp swab copy
Track 05: audio 48 MB (04:49.53) no preemp swab copy
Track 06: audio 41 MB (04:06.97) no preemp swab copy
Track 07: audio 32 MB (03:11.26) no preemp swab copy
Track 08: audio 41 MB (04:04.89) no preemp swab copy
Track 09: audio 41 MB (04:08.00) no preemp swab copy
Track 10: audio 28 MB (02:46.53) no preemp swab copy
Track 11: audio 29 MB (02:53.26) no preemp swab copy
Track 12: audio 30 MB (03:02.26) no preemp swab copy
Track 13: audio 30 MB (03:04.13) no preemp swab copy
Total size: 479 MB (47:28.06) = 213605 sectors
Lout start: 479 MB (47:30/05) = 213605 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, low Beta category (A-) (2)
Speed set to 2823 KB/s
ATIP start of lead in: -12508 (97:15/17)
ATIP start of lead out: 359845 (79:59/70)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 146240
Starting to write CD/DVD at speed 16.0 in real TAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Errno: 5 (Input/output error), send opc scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 00 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 70.510s timeout 60s
/usr/bin/wodim: OPC failed.
Writing time: 73.120s
BURN-Free was never needed.
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=16 -tao driveropts=burnfree -eject -useinfo -audio /tmp/kde-mediacenter/k3b_audio_0_01.inf /tmp/kde-mediacenter/k3b_audio_0_02.inf /tmp/kde-mediacenter/k3b_audio_0_03.inf /tmp/kde-mediacenter/k3b_audio_0_04.inf /tmp/kde-mediacenter/k3b_audio_0_05.inf /tmp/kde-mediacenter/k3b_audio_0_06.inf /tmp/kde-mediacenter/k3b_audio_0_07.inf /tmp/kde-mediacenter/k3b_audio_0_08.inf /tmp/kde-mediacenter/k3b_audio_0_09.inf /tmp/kde-mediacenter/k3b_audio_0_10.inf /tmp/kde-mediacenter/k3b_audio_0_11.inf /tmp/kde-mediacenter/k3b_audio_0_12.inf /tmp/kde-mediacenter/k3b_audio_0_13.inf
