Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Xubuntu 16.04, geen internetverbinding meer.  (gelezen 1869 keer)

Offline Johncr

  • Lid
Xubuntu 16.04, geen internetverbinding meer.
« Gepost op: 2017/04/30, 23:27:14 »
Dag allemaal,

Machine is 2-voudig opstartbaar: Windows 10 en Xubuntu. Werkte tot voor kort met Xubuntu 14.04, 2 maanden geleden Xubuntu 16.04 geinstalleeerd (schone installatie), systeem draaide prima. Sinds gister heb ik echter onder Xubuntu geen internetverbinding meer, ik vermoed dat dit wordt veroorzaakt door een update van Windows waardoor de internetinstelling is veranderd?  Machine werd geleverd met Windows 7. Op het forum gezocht bij de vele vragen en antwoorden over dit onderwerp, kon echter geen oplossing vinden.

Graag jullie raad.
Hartelijke groet,
John

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #1 Gepost op: 2017/04/30, 23:35:11 »
a. Geef eens een volledig systeemoverzicht, op de volgende wijze:
https://sites.google.com/site/computertip/inxi

b. Geef tevens de uitvoer van de volgende terminalopdrachten:
rfkill list allen:
inxi -Nnen:
iwconfig

Offline Johncr

  • Lid
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #2 Gepost op: 2017/05/01, 00:58:09 »
Dag Pjotr,
Hier volgen de antwoorden op jouw vragen:- rf kill list all:
geen omschrijving;

- inxi - Fxz
hans@hans-System-Product-Name:~$ inxi -Fxz
System:    Host: hans-System-Product-Name Kernel: 4.4.0-75-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: Xfce 4.12.3 (Gtk 2.24.28) Distro: Ubuntu 16.04 xenial
Machine:   Mobo: ASUSTeK model: P7H55-M v: Rev X.0x
           Bios: American Megatrends v: 1101 date: 08/18/2010
CPU:       Dual core Intel Core i3 550 (-HT-MCP-) cache: 4096 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 12843
           clock speeds: max: 3200 MHz 1: 1467 MHz 2: 2000 MHz 3: 1200 MHz
           4: 1200 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210] bus-ID: 01:00.0
           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)
           Resolution: 1680x1050@59.88hz
           GLX Renderer: GeForce 210/PCIe/SSE2
           GLX Version: 3.3.0 NVIDIA 340.102 Direct Rendering: Yes
Audio:     Card-1 Intel 5 Series/3400 Series High Definition Audio
           driver: snd_hda_intel bus-ID: 00:1b.0
           Card-2 NVIDIA High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1
           Sound: Advanced Linux Sound Architecture v: k4.4.0-75-generic
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d800 bus-ID: 02:00.0
           IF: enp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 5501.1GB (7.1% used)
           ID-1: /dev/sda model: WDC_WD5000AAKS size: 500.1GB
           ID-2: /dev/sdb model: SAMSUNG_HD103SJ size: 1000.2GB
           ID-3: USB /dev/sdk model: Elements_107C size: 4000.8GB
Partition: ID-1: / size: 913G used: 359G (42%) fs: ext4 dev: /dev/sdb1
           ID-2: swap-1 size: 4.15GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 33.5C mobo: 24.0C gpu: 0.0:38C
           Fan Speeds (in rpm): cpu: 969 sys-1: 1360
Info:      Processes: 213 Uptime: 1 min Memory: 365.2/3815.3MB
           Init: systemd runlevel: 5 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461) inxi: 2.2.35
hans@hans-System-Product-Name:~$ dpkg --configure -a
- inxi - Nn
hans@hans-System-Product-Name:~$ inxi - Nn
CPU~Dual core Intel Core i3 550 (-HT-MCP-) speed/max~1200/3200 MHz Kernel~4.4.0-75-generic x86_64 Up~5 min Mem~454.5/3815.3MB HDD~5501.1GB(7.1% used) Procs~202 Client~Shell inxi~2.2.35 
hans@hans-System-Product-Name:~$
- iw config
hans@hans-System-Product-Name:~$ iw config
Usage: iw [options] command
Options:
--debug enable netlink debugging
--version show version (3.17)
Commands:
help [command]
Print usage for all or a specific command, e.g.
"help wowlan" or "help wowlan enable".

event [-t] [-r] [-f]
Monitor events from the kernel.
-t - print timestamp
-r - print relative timstamp
-f - print full frame for auth/assoc etc.

features


commands
list all known commands and their decimal & hex value

phy
list
List all wireless devices and their capabilities.

phy <phyname> info
Show capabilities for the specified wireless device.

dev
List all network interfaces for wireless hardware.

dev <devname> info
Show information for this interface.

dev <devname> del
Remove this virtual interface

dev <devname> interface add <name> type <type> [mesh_id <meshid>] [4addr on|off] [flags <flag>*]
phy <phyname> interface add <name> type <type> [mesh_id <meshid>] [4addr on|off] [flags <flag>*]
Add a new virtual interface with the given configuration.
Valid interface types are: managed, ibss, monitor, mesh, wds.

The flags are only used for monitor interfaces, valid flags are:
none:     no special flags
fcsfail:  show frames with FCS errors
control:  show control frames
otherbss: show frames from other BSSes
cook:     use cooked mode
active:   use active mode (ACK incoming unicast packets)

The mesh_id is used only for mesh mode.

dev <devname> ibss join <SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>] [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]
Join the IBSS cell with the given SSID, if it doesn't exist create
it on the given frequency. When fixed frequency is requested, don't
join/create a cell on a different frequency. When a fixed BSSID is
requested use that BSSID and do not adopt another cell's BSSID even
if it has higher TSF and the same SSID. If an IBSS is created, create
it with the specified basic-rates, multicast-rate and beacon-interval.

dev <devname> ibss leave
Leave the current IBSS cell.

dev <devname> station dump
List all stations known, e.g. the AP on managed interfaces

dev <devname> station set <MAC address> mesh_power_mode <active|light|deep>
Set link-specific mesh power mode for this station

dev <devname> station set <MAC address> vlan <ifindex>
Set an AP VLAN for this station.

dev <devname> station set <MAC address> plink_action <open|block>
Set mesh peer link action for this station (peer).

dev <devname> station del <MAC address>
Remove the given station entry (use with caution!)

dev <devname> station get <MAC address>
Get information for a specific station.

dev <devname> survey dump
List all gathered channel survey data

dev <devname> mesh leave
Leave a mesh.

dev <devname> mesh join <mesh ID> [[freq <freq in MHz> <HT20|HT40+|HT40-|NOHT>] [basic-rates <rate in Mbps,rate2,...>]], [mcast-rate <rate in Mbps>] [beacon-interval <time in TUs>] [dtim-period <value>] [vendor_sync on|off] [<param>=<value>]*
Join a mesh with the given mesh ID with frequency, basic-rates,
mcast-rate and mesh parameters. Basic-rates are applied only if
frequency is provided.

dev <devname> mpath dump
List known mesh paths.

dev <devname> mpath set <destination MAC address> next_hop <next hop MAC address>
Set an existing mesh path's next hop.

dev <devname> mpath new <destination MAC address> next_hop <next hop MAC address>
Create a new mesh path (instead of relying on automatic discovery).

dev <devname> mpath del <MAC address>
Remove the mesh path to the given node.

dev <devname> mpath get <MAC address>
Get information on mesh path to the given node.

dev <devname> scan [-u] [freq <freq>*] [ies <hex as 00:11:..>] [meshid <meshid>] [lowpri,flush,ap-force] [ssid <ssid>*|passive]
Scan on the given frequencies and probe for the given SSIDs
(or wildcard if not given) unless passive scanning is requested.
If -u is specified print unknown data in the scan results.
Specified (vendor) IEs must be well-formed.

dev <devname> scan trigger [freq <freq>*] [ies <hex as 00:11:..>] [meshid <meshid>] [lowpri,flush,ap-force] [ssid <ssid>*|passive]
Trigger a scan on the given frequencies with probing for the given
SSIDs (or wildcard if not given) unless passive scanning is requested.

dev <devname> scan dump [-u]
Dump the current scan results. If -u is specified, print unknown
data in scan results.

reg get
Print out the kernel's current regulatory domain information.

reg set <ISO/IEC 3166-1 alpha2>
Notify the kernel about the current regulatory domain.

dev <devname> auth <SSID> <bssid> <type:open|shared> <freq in MHz> [key 0:abcde d:1:6162636465]
Authenticate with the given network.


dev <devname> connect [-w] <SSID> [<freq in MHz>] [<bssid>] [key 0:abcde d:1:6162636465]
Join the network with the given SSID (and frequency, BSSID).
With -w, wait for the connect to finish or fail.

dev <devname> disconnect
Disconnect from the current network.

dev <devname> link
Print information about the current link, if any.

dev <devname> offchannel <freq> <duration>
Leave operating channel and go to the given channel for a while.

dev <devname> cqm rssi <threshold|off> [<hysteresis>]
Set connection quality monitor RSSI threshold.


phy <phyname> wowlan show
Show WoWLAN status.

phy <phyname> wowlan disable
Disable WoWLAN.

phy <phyname> wowlan enable [any] [disconnect] [magic-packet] [gtk-rekey-failure] [eap-identity-request] [4way-handshake] [rfkill-release] [tcp <config-file>] [patterns [offset1+]<pattern1> ...]
Enable WoWLAN with the given triggers.
Each pattern is given as a bytestring with '-' in places where any byte
may be present, e.g. 00:11:22:-:44 will match 00:11:22:33:44 and
00:11:22:33:ff:44 etc.
Offset and pattern should be separated by '+', e.g. 18+43:34:00:12 will match '43:34:00:12' after 18 bytes of offset in Rx packet.

The TCP configuration file contains:
  source=ip[:port]
  dest=ip:port@mac
  data=<hex data packet>
  data.interval=seconds
  [wake=<hex packet with masked out bytes indicated by '-'>]
  [data.seq=len,offset[,start]]
  [data.tok=len,offset,<token stream>]

phy <phyname> coalesce show
Show coalesce status.

phy <phyname> coalesce disable
Disable coalesce.

phy <phyname> coalesce enable <config-file>
Enable coalesce with given configuration.
The configuration file contains coalesce rules:
  delay=<delay>
  condition=<condition>
  patterns=<[offset1+]<pattern1>,<[offset2+]<pattern2>,...>
  delay=<delay>
  condition=<condition>
  patterns=<[offset1+]<pattern1>,<[offset2+]<pattern2>,...>
  ...
delay: maximum coalescing delay in msec.
condition: 1/0 i.e. 'not match'/'match' the patterns
patterns: each pattern is given as a bytestring with '-' in
places where any byte may be present, e.g. 00:11:22:-:44 will
match 00:11:22:33:44 and 00:11:22:33:ff:44 etc. Offset and
pattern should be separated by '+', e.g. 18+43:34:00:12 will
match '43:34:00:12' after 18 bytes of offset in Rx packet.


dev <devname> roc start <freq> <time in ms>


wdev <idx> p2p stop


wdev <idx> p2p start


phy <phyname> set antenna <bitmap> | all | <tx bitmap> <rx bitmap>
Set a bitmap of allowed antennas to use for TX and RX.
The driver may reject antenna configurations it cannot support.

dev <devname> set txpower <auto|fixed|limit> [<tx power in mBm>]
Specify transmit power level and setting type.

phy <phyname> set txpower <auto|fixed|limit> [<tx power in mBm>]
Specify transmit power level and setting type.

phy <phyname> set distance <auto|distance>
Enable ACK timeout estimation algorithm (dynack) or set appropriate
coverage class for given link distance in meters.
To disable dynack set valid value for coverage class.
Valid values: 0 - 114750

phy <phyname> set coverage <coverage class>
Set coverage class (1 for every 3 usec of air propagation time).
Valid values: 0 - 255.

phy <phyname> set netns <pid>
Put this wireless device into a different network namespace

phy <phyname> set retry [short <limit>] [long <limit>]
Set retry limit.

phy <phyname> set rts <rts threshold|off>
Set rts threshold.

phy <phyname> set frag <fragmentation threshold|off>
Set fragmentation threshold.

dev <devname> set channel <channel> [HT20|HT40+|HT40-]
phy <phyname> set channel <channel> [HT20|HT40+|HT40-]
dev <devname> set freq <freq> [HT20|HT40+|HT40-]
dev <devname> set freq <control freq> [20|40|80|80+80|160] [<center freq 1>] [<center freq 2>]
phy <phyname> set freq <freq> [HT20|HT40+|HT40-]
Set frequency/channel the hardware is using, including HT
configuration.

phy <phyname> set name <new name>
Rename this wireless device.

dev <devname> set mcast_rate <rate in Mbps>
Set the multicast bitrate.

dev <devname> set peer <MAC address>
Set interface WDS peer.

dev <devname> set noack_map <map>
Set the NoAck map for the TIDs. (0x0009 = BE, 0x0006 = BK, 0x0030 = VI, 0x00C0 = VO)

dev <devname> set 4addr <on|off>
Set interface 4addr (WDS) mode.

dev <devname> set type <type>
Set interface type/mode.
Valid interface types are: managed, ibss, monitor, mesh, wds.

dev <devname> set meshid <meshid>
dev <devname> set monitor <flag>*
Set monitor flags. Valid flags are:
none:     no special flags
fcsfail:  show frames with FCS errors
control:  show control frames
otherbss: show frames from other BSSes
cook:     use cooked mode
active:   use active mode (ACK incoming unicast packets)

dev <devname> set mesh_param <param>=<value> [<param>=<value>]*
Set mesh parameter (run command without any to see available ones).

dev <devname> set power_save <on|off>
Set power save state to on or off.

dev <devname> set bitrates [legacy-<2.4|5> <legacy rate in Mbps>*] [ht-mcs-<2.4|5> <MCS index>*] [vht-mcs-<2.4|5> <NSS:MCSx,MCSy... | NSS:MCSx-MCSy>*] [sgi-2.4|lgi-2.4] [sgi-5|lgi-5]
Sets up the specified rate masks.
Not passing any arguments would clear the existing mask (if any).

dev <devname> get mesh_param [<param>]
Retrieve mesh parameter (run command without any to see available ones).

dev <devname> get power_save <param>
Retrieve power save state.


Commands that use the netdev ('dev') can also be given the
'wdev' instead to identify the device.

You can omit the 'phy' or 'dev' if the identification is unique,
e.g. "iw wlan0 info" or "iw phy0 info". (Don't when scripting.)

Do NOT screenscrape this tool, we don't consider its output stable.

hans@hans-System-Product-Name:~$
Veel dank alvast voor je hulp!
Hartelijke groet,
John

Moderator edit: code tags geplaatst.
« Laatst bewerkt op: 2017/05/01, 11:20:16 door Ron »

Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #3 Gepost op: 2017/05/01, 06:22:54 »
@Johncr,
Lees nog eens de vragen van Pjotr en voer ze ook zo uit.
Dus de commando's kopiëren en plakken in de terminal.

Succes verder!
mvg,  Peter
Desktop: xubuntu 18.04.6
"No windows in the house but somehow there's more light..."
The future ain’t what it used to be.

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #4 Gepost op: 2017/05/01, 12:12:44 »
Zoals pederoco zegt.... alleen inxi -Fxz is correct uitgevoerd; de rest niet. Doe het alsnog.

Offline jolo

  • Lid
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #5 Gepost op: 2017/05/01, 20:53:58 »
Maar in dit geval staat in de inxi -Fxz output van de TS het belangrijkste. Namelijk dat er maar één netwerkkaart is, die exact overeenkomt met die Realtek RTL8111/8168/8411 onboard netwerkkaart van de PC 2007 uit mijn onderschrift.

Ik vond daarover deze How To get your Realtek RTL8111/RTL8168 working.  Die onboard netwerkkaart heeft inderdaad de r8168-dkms nodig. Alleen niet op de manier van die site. In de r8168-dkms van (X)Ubuntu 16.04 pakketbronnen zit een bug.

Wat wel bruikbaar is het r8168-dkms deb pakket uit https://www.ubuntuupdates.org/package/core/zesty/universe/base/r8168-dkms
Die kun je gewoon installeren in Xubuntu 16.04 via applicatie Gdebi. Ik heb 'm met succes kunnen installeren. Na de reboot wordt de r8168 geladen en functioneert de onboard netwerkkaart weer.

Zie hier het netwerk gedeelte van mijn inxi output
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8168 v: 8.043.02-NAPI port: b800 bus-ID: 03:00.0
           IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
 

Edit: Alleen heeft die r8168-dkms wel één afhankelijkheid.
jolo@conroe:~$ dpkg -I r8168-dkms_8.043.02-1_all.deb
 nieuw debian pakket, versie 2.0.
 grootte 87112 bytes: controlearchief=1955 bytes.
      32 bytes,     1 regels      conffiles           
    1174 bytes,    26 regels      control             
    1255 bytes,    18 regels      md5sums             
     894 bytes,    31 regels   *  postinst             #!/bin/sh
     315 bytes,    14 regels   *  prerm                #!/bin/sh
 Package: r8168-dkms
 Source: r8168
 Version: 8.043.02-1
 Architecture: all
 Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
 Original-Maintainer: Andreas Beckmann <anbe@debian.org>
 Installed-Size: 1108
 Depends: dkms (>= 2.1.0.0)
 Section: non-free/kernel
 Priority: extra
 Homepage: https://github.com/mtorromeo/r8168
 Description: dkms source for the r8168 network driver
  r8168 is the Linux device driver released for RealTek RTL8111B/RTL8168B,
  RTL8111/RTL8168, RTL8111C/RTL8111CP/RTL8111D(L), RTL8168C/RTL8111DP/RTL8111E,
  RTL8168E/RTL8111F/RTL8411, RTL8111G/RTL8111GUS/RTL8411B(N), RTL8118AS
  Gigabit Ethernet controllers with PCI-Express interface.
  .
  This driver should only be used for devices not yet supported by the
  in-kernel driver r8169. Please see the README.Debian for instructions how
  to report bugs against r8169 that made it necessary to use r8168-dkms.
  .
  Installation of the r8168-dkms package will disable the in-kernel r8169
  module. To re-enable r8169, the r8168-dkms package must be purged.
  .
  This package provides the dkms source code for the r8168 kernel modules.
  Kernel source or headers are required to compile these modules.

Wellicht is er tijdelijk een andere netwerkverbinding nodig, zodat Gdebi deze afhankelijkheid automatisch kan installeren.
« Laatst bewerkt op: 2017/05/01, 21:23:33 door jolo »
Hoofd PC januari 2018 HP Compaq Elite 8300 SFF Windows 10 & Xubuntu 18.04.3
PC 2011 Asus P8Z68-V Pro i7 2600K 8 GB RAM GT730 Xubuntu test pc
PC 2007 Asus P5B E6600 2GB RAM 8800GTS  
Notebook 2008 Lenovo ThinkPad R61i 8932GMG 2,5 GB RAM

Offline Johncr

  • Lid
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #6 Gepost op: 2017/05/01, 23:08:32 »
Dag Pjotr en Jolo,
Pjotr: hopelijk zijn dit wel de juiste antwoorden op jouw vragen:

hans@hans-System-Product-Name:~$ rfkill list all
hans@hans-System-Product-Name:~$ inxi -Nn
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp2s0 state: down mac: 20:cf:30:e3:ad:ed
hans@hans-System-Product-Name:~$ iwconfig
enp2s0    no wireless extensions.

lo        no wireless extensions.

hans@hans-System-Product-Name:~$

Jolo: wat betekent jouw opmerking "Alleen heeft die r8168-dkms wel één afhankelijkheid"? Als jouw suggestie de oplossing voor mijn probleem is, kan ik dat bestand via Windows downloaden en vervolgens installeren in Xubuntu?

NB
Ik kan de commando's niet plakken omdat ik via Xubuntu geen internetverbinding heb, laat onverlet dat ik de commando's beter moet invoeren.
Groet,
John

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #7 Gepost op: 2017/05/02, 10:45:10 »
Als je opstart vanaf een oudere kernel, heb je dan wel internetverbinding?

Offline Johncr

  • Lid
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #8 Gepost op: 2017/05/02, 11:29:14 »
Dag Pjotr,
Vanuit vorige kernel opgestart, is helaas niet de oplossing. Volgens mij is er op de dag dat de internetvebinding het liet afweten, geen nieuwe kernel gestuurd/geïnstalleerd. Kan ik iets doen vanuit geavanceerde opties?
Of moet ik het bij de Windowsinstellingen zoeken?

Groet,
John

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #9 Gepost op: 2017/05/02, 12:11:07 »
Start je PC eens op vanaf de DVD van Xubuntu. Heb je dan wel internet?

Offline landfiets

  • Lid
    • Toets en Stem
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #10 Gepost op: 2017/05/02, 14:02:48 »
Hoi

Als je wel een ethernet card in de computer hebt zoals in de output blijkt, waarom verbindt je dan geen kabeltje met je modem om zo even op t internet te kunnen?  Dan kan je dan de commando's doen en de .deb file evt installeren als dat de oplossing blijkt.

Of is nu juist je internet via het kabeltje het probleem? Of heb je geen wifi?

Wat gebeurt er als je dit in terminal intypt?

dhcpcd enp2s0
« Laatst bewerkt op: 2017/05/02, 14:23:04 door landfiets »
--------------
Intel-NUC 8i5BEH, 256Gb M.2 SSD , 16Gb ram - Manjaro Gnome 21
Intel-NUC 10i7FNH, 500GB M.2 SSD, 16Gb ram - Manjaro Gnome 21
--------------

Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #11 Gepost op: 2017/05/02, 14:05:18 »
Je moet soms meer dan 1 kernel terug gaan om succes te hebben.
Heb dat hier voor gehad met een Wifi USB-dongle.

Groeten van Michael.
Mint Cinnamon fan  Mint cinnamon-21.2   (vorige linux: LMDE-5 / Mint cinnamon-20+19+18+17 / Ubuntu-16+14+12)

Offline Johncr

  • Lid
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #12 Gepost op: 2017/05/02, 20:51:59 »
Dag allemaal,
Met de Live DvD (Xubuntu 16.04.2.) heb ik internet.
Ik heb een kabelaansluiting op het modem
Ik heb, zonder succes, de oudste kernel gebruikt om op te starten.

Ik neig ertoe om het systeem opnieuw te installeren.

NB
Vergeten te melden, op 22  maart j.l.  kreeg ik het tijdens het ontvangen van een update de navolgende melding: "failure: file system check of the root filesystem failed. the root filesystem on /dev/sdb1/ requires a manual fsck". Met de hulp van Vanadium kreeg ik de pc weer aan de praat,  en draaide, deze tot het huidig probleem zich voordeed, als een zonnetje.

Groet,
John

Offline Pjotr

  • Lid
    • Makkelijke Linuxtips
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #13 Gepost op: 2017/05/02, 21:07:45 »
In dit geval raad ik aan om een schone installatie te doen van Linux Mint Xfce 18.1. Kies daarin voor het meest voorzichtige bijwerkbeleid en houd je daaraan. Zo houd je "rotte appels" buiten de deur (iets wat niet kan in Xubuntu).

Haal 'm hier:
http://ftp.tudelft.nl/linuxmint/stable/18.1/linuxmint-18.1-xfce-64bit.iso

10 dingen om te doen na installatie:
https://sites.google.com/site/computertip/direct-doen-mint-xfce

Offline Johncr

  • Lid
Re: Xubuntu 16.04, geen internetverbinding meer.
« Reactie #14 Gepost op: 2017/05/02, 21:30:47 »
aanvulling op mijn vorig bericht
Het commando dhcpcd en2s0 levert het volgende resultaat op:

hans@hans-System-Product-Name:~$ dhcpcd en2s0
Het programma ‘dhcpcd’ is momenteel niet geïnstalleerd. U kunt het installeren door het volgende te typen:
sudo apt install dhcpcd5
hans@hans-System-Product-Name:~$

Mocht deze informatie geen soelaas bieden, volg ik het advies van Pjotr op en installeer ik Linux Mint Xfce 18.1

Groet,
John