kan geen CDs branden.

[JV.com]

Hey mensen.

ik zit met een probleempje waar ik al langere tijd al last van heb. op welke manier ik ook probeer het branden van audio/DATA/whatever CD loopt altijd uit op een mislukking.

ik heb eigenlijk geen flauw idee waar het aan zou liggen daarom dat ik jullie hier nu vraag om hulp. Ik heb 2 foutlogs fftjes bijgevoegd zodat jullie daar misschien iets aan kunnen afleiden. telkens als ik een CD wil branden buffer die de data en daarna geeft een een foutmelding in de zin van ¨mislukt¨. en volgens mij heb ik alle benodigde media pakketen wel geinstalleerd. 

ik heb ubuntu 9.04 (PS: eerdere versies wouden ook nooit branden)

ik heb het geprobeert met:

* k3b
* brasero.
* gnomebaker

Wie o Wie kan mij helpen?

brasero fouten rapport:

Code: [Selecteer]

Checking session consistency (brasero_burn_check_session_consistency burn.c:1905)
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_set_use_average_rate
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode deactivating
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_session_output_size
BraseroTranscode Output set (AUDIO) image = /tmp/brasero_tmp_9Y8WTU.cdr
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_set_use_average_rate
BraseroTranscode called brasero_job_get_fd_out
BraseroTranscode called brasero_job_get_fd_out
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode called brasero_job_get_done_tracks
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode settings track boundaries time = 0 136751015280 / bytes = 0 24122880
BraseroTranscode Creating new pipeline
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_fd_out
BraseroTranscode called brasero_job_get_image_output
BraseroTranscode New pad
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Sending audio levels tags
BraseroTranscode Set volume level 0,000000 0,000000
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_set_current_action
BraseroTranscode called brasero_job_get_fd_out
BraseroTranscode called brasero_job_get_audio_output
BraseroTranscode start decoding /media/DATA/Jelte/Downloads/Kinderkabaret Potvoordrie - CDRip/Pot-voor-drie-vier komt'r nog wat van/16 Duo bont (de dame met twee honden).mp3 to /tmp/brasero_tmp_9Y8WTU.cdr
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode Retrieving tags
BraseroTranscode called brasero_job_get_action
BraseroTranscode called brasero_job_get_fd_out
BraseroTranscode called brasero_job_get_audio_output
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode wrote 24118272 bytes (= 136724897960 ns) out of 24122880 (= 136751015280 ns)
=> padding 6192 bytes
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 512 bytes for padding
BraseroTranscode written 48 bytes for padding
BraseroTranscode called brasero_job_get_audio_output
BraseroTranscode called brasero_job_get_current_track
BraseroTranscode called brasero_job_get_output_type
BraseroTranscode called brasero_job_add_track
BraseroTranscode called brasero_job_get_action
BraseroTranscode Finished track successfully
BraseroTranscode stopping
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_audio_title
BraseroWodim called brasero_job_get_tracks
BraseroWodim called brasero_job_get_fd_in
BraseroWodim writing inf (/tmp/brasero_tmp_9Y8WTU.inf)
BraseroWodim got track length 136751015280 10257
BraseroWodim called brasero_job_get_tracks
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
wodim
-v
dev=/dev/sr1
speed=40
driveropts=burnfree
-dao
fs=16m
-audio
-swab
-pad
-useinfo
-text
/tmp/brasero_tmp_9Y8WTU.cdr
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr1'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/sr1'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.9
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 0 = CD-DA
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type    : Removable CD-ROM
BraseroWodim stdout: Version        : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities   :
BraseroWodim stdout: Vendor_info    : 'Optiarc '
BraseroWodim stdout: Identification : 'DVD RW AD-5170A '
BraseroWodim stdout: Revision       : '1.52'
BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
BraseroWodim stdout: Current: 0x0009 (CD-R)
BraseroWodim stdout: Profile: 0x002B (DVD+R/DL)
BraseroWodim stdout: Profile: 0x001B (DVD+R)
BraseroWodim stdout: Profile: 0x001A (DVD+RW)
BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording)
BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording)
BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording)
BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite)
BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording)
BraseroWodim stdout: Profile: 0x0010 (DVD-ROM)
BraseroWodim stdout: Profile: 0x000A (CD-RW)
BraseroWodim stdout: Profile: 0x0009 (CD-R) (current)
BraseroWodim stdout: Profile: 0x0008 (CD-ROM) (current)
BraseroWodim stdout: Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
BraseroWodim stdout: Driver flags   : MMC-3 SWABAUDIO BURNFREE
BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
BraseroWodim stdout: Drive buf size : 890880 = 870 KB
BraseroWodim stdout: FIFO size      : 16777216 = 16384 KB
BraseroWodim stderr: Speed set to 7056 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: pregap1: -1
BraseroWodim stdout: Track 01: audio   23 MB (02:16.76) no preemp copy
BraseroWodim stdout: Total size:       23 MB (02:16.76) = 10257 sectors
BraseroWodim stdout: Lout start:       23 MB (02:18/57) = 10257 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: ATIP info from disk:
BraseroWodim stdout:   Indicated writing power: 5
BraseroWodim stdout:   Is not unrestricted
BraseroWodim stdout:   Is not erasable
BraseroWodim stdout:   Disk sub type: Medium Type B, low Beta category (B-) (4)
BraseroWodim stdout:   ATIP start of lead in:  -11634 (97:26/66)
BraseroWodim stdout:   ATIP start of lead out: 359849 (79:59/74)
BraseroWodim stdout: Disk type:    Short strategy type (Phthalocyanine or similar)
BraseroWodim stdout: Manuf. index: 3
BraseroWodim stdout: Manufacturer: CMC Magnetics Corporation
BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 349592
BraseroWodim stdout: Starting to write CD/DVD at speed  40.0 in real SAO mode for single session.
BraseroWodim stdout: Last chance to quit, starting real write in    4 seconds.
BraseroWodim called brasero_job_set_dangerous
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    3 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    2 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    1 seconds.   0 seconds. Operation starts.
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stdout: Performing OPC...
BraseroWodim stderr: Errno: 5 (Input/output error), send opc scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB:  54 01 00 00 00 00 00 00 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Writing  time:    8.051s
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: BURN-Free was never needed.
BraseroWodim stderr: Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Key: 0x3 Medium Error, Segment 0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 8.009s timeout 200s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: OPC failed.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo had 255 puts and 0 gets.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: HUP
BraseroWodim stderr: HUP
BraseroWodim process finished with status 255
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 0
message = "no message"
BraseroWodim stopping
BraseroWodim got killed
Session error : unknown (brasero_burn_record burn.c:2602)

Gnomebaker fouten rapport:

Code: [Selecteer]

wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr1'
devname: '/dev/sr1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 0 = CD-DA
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'Optiarc '
Identification : 'DVD RW AD-5170A '
Revision       : '1.52'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 890880 = 870 KB
FIFO size      : 12582912 = 12288 KB
Speed set to 1411 KB/s
   4 seconds.   3 seconds.   2 seconds.   1 seconds.   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Errno: 5 (Input/output error), send opc scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 8.007s timeout 60s
wodim: OPC failed.
Writing  time:    8.050s
BURN-Free was never needed.
wodim: fifo had 192 puts and 0 gets.
wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

 

[Cumulus007]

Is je brander nog wel goed? Ik zou eens een andere proberen.

[jan11000]

Andere cd's proberen, een ander merk.

En vertel wat, wel en wat niet lukt!

[JV.com]

mmmhz, hij doet het anders altijd prima onder Windows + ik heb geen andere brander zo 123 liggen.

niemand een eventueel ander idee

alvast bedankt voor jullie hulp.

JV.com

[sjakie1972]

ik had hetzelfde probleem, tot ik onder /etc/modules het woord "piix" toevoegde, toen kon ik met alle programma's opeens razendsnel branden, dus het ligt niet aan de dvd-brander..
(p.s. ik ben pas 6 weken met Ubuntu, dus weet niet hoe en wat verantwoord het advies is, enkel het werkte bij mij)
groet, Paul

[Cumulus007]

ik had hetzelfde probleem, tot ik onder /etc/modules het woord "piix" toevoegde, toen kon ik met alle programma's opeens razendsnel branden, dus het ligt niet aan de dvd-brander..
(p.s. ik ben pas 6 weken met Ubuntu, dus weet niet hoe en wat verantwoord het advies is, enkel het werkte bij mij)
groet, Paul

http://linux.about.com/cs/linux101/g/piix.htm

Welkom trouwens