@jor177 Misschien helpt het om het exacte type van je laptop te vermelden ?
http://www.programfiles.co.uk/support/tattoo.phpDo you have 'No valid information found' or ' Glue Part Errors'? Your Packard Bell computer will need re tattoing.
The installation of Packard Bell software including the Windows operating system cannot take place unless special markings are present on the motherboard and also the hardrive. This is to combat piracy, a brief summary of the tattoo process is listed below, at the bottom of the page are links to other websites that go into more detail about the Packard Bell tattoo system;
Start your computer with CD1 in the disk drive.
Say "no" to the restoration, press N, escape or choose the option of 'return to dos' to get into DOS prompt (It depends on the system as to the option).
Fdisk the drive, one partition, enable large disk support (fat32) (click here for detailed explanation of FDISK)
When completed restart computer by pressing Ctrl + Alt + Delete
The computer will reboot, return to DOS by choosing the same options as above
Type: format c:/v:HDD
When completed restart computer with Ctrl + Alt + Delete
The computer will reboot , return to DOS by choosing the same options as above
When tattooing; Q is the letter for the optical drive.
If you have Master disks that you made yourself
Type: Q: press enter
Type: reloadhs.bat press Enter
Once you recieve the message 'tattooed /done', reboot, the system is fully tattooed.
For master disks bought from Packard Bell:
Type: Q: and press enter
Type: Q:\DRIVERS and press enter
Type: Q:\DRIVERS\TATTOO /CREATEHSFROMDMI and press enter
Type: Q:\EXTHS/RESTORE and press enter
After the exths/restore command you will need to enter the computers Serial Number and Part Numbers, found on the back of your computer, you will also need the Packard Bell support code, we are not allowed to advertise this code but it is widely available on the internet. (you can contact us if you are having problems) you will be rebuilding the extended hidden sector (exths), The EXTHS system will ask you to choose components that are in your computer from a specfied list, you can find out what components you need to select by entering your serial number on the Packard Bell support page, located here.
After you have completed tattooing the drive and you are certain the exths information is correct if you wish you can tattoo the DMI.
Type: cd drivers press enter
Type: tattoo/createdmifromhs press enter
You will get a message on the screen saying 'tattooing system', when DONE restart computer with ctl + alt + del this time, choose the recovery option.
