Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Schokkend beeld  (gelezen 907 keer)

Offline Hij

  • Lid
Schokkend beeld
« Gepost op: 2007/03/11, 18:53:32 »
Ik heb net xubuntu op mijn laptop gezet :) Maar nu schokt het beeld heel erg bij websites kijken. Bij mijn vorige installatie (ff geleden) moest ik wat veranderen in xorg.conf. Ik weet nu ff niet meer wat dat was. Ik heb geprobeerd te zoeken, maar werd een beetje misselijk van het beeld (door het schokken ;))

Mijn xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "intl"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 28-51
VertRefresh 43-60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection

Offline filenox

  • Lid
    • filenox@tweakblogs.net
Schokkend beeld
« Reactie #1 Gepost op: 2007/03/11, 19:02:30 »
Je moet je videokaartdrivers installeren :)

Offline Soul-Sing

  • Lid
Schokkend beeld
« Reactie #2 Gepost op: 2007/03/11, 19:43:35 »
Identifier    "Generic Video Card"
    Driver        "vesa"
    BusID        "PCI:1:0:0"
EndSection

vesa is de "ubuntu-driver", beter is het de off. drivers te installen.



doe eens:

   
Citaat
lspci|grep VGA
in de terminal.

Offline Hij

  • Lid
Schokkend beeld
« Reactie #3 Gepost op: 2007/03/11, 22:21:12 »
Zo ben weer terug op xubuntu :)

01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01)

Offline Hij

  • Lid
Schokkend beeld
« Reactie #4 Gepost op: 2007/03/12, 21:07:08 »
Help! Ik ben dom geweest!!!

Door het probleem met de video kaart voor de laptop heb ik dit topic geopend. Ik ben zelf op een andere computer (met ook xubuntu) gaan zoeken naar het topic wat mij ooit geholpen heeft met de tv out van mijn video kaart voor de laptop. En ik heb toen dat uitgevoerd op mijn andere (desktop) computer, met een andere video kaart :( (best dom he!)
Ik was een beetje dromerig en het zag toch het zelfde uit (allebij xfce), heb ik het op de verkeerde pc gedaan...

Het volgende heb ik uitgevoerd op mijn desktop computer:

Citaat van: profoX
Citaat van: Hij
Citaat van: profoX
welke videokaart heb je?
0000:01:00.0 VGA compatible controller: S3 Inc. VT8636A [ProSavage KN133] AGP4X VGA Controller (TwisterK) (rev 01)

Deze werkte trouwens in windows ook niet flekkeloos. Moest zelf de driver van een archief site afhalen!
na snel even zoeken kwam ik dit tegen:
savage driver gebruiken en s3switch (http://www.probo.com/timr/s3s.tgz) downloaden/gebruiken, het is een binary bestand
Citaat van: profoX
.tgz is een samentrekking van .tar.gz
Bestanden zijn dus ge-gzip'd en zitten in een .tar

Uitpakken om te kunnen gebruiken:
profox@kreafleur:~$ tar zxvf s3s.tgz
s3switch
s3switch.1x

Hoe moet je het programma gebruiken:
profox@kreafleur:~$ sudo ./s3switch -h
Usage: s3switch [-q] [crt|lcd|both|tv] [ntsc|ntscj|pal]
  -q requests quiet operation.
  crt, lcd and tv activates output to those devices.  Several devices may be
    specified.  Only devices which are actually attached may be activated.
  both is a shortcut for 'crt lcd'.
  ntscj, ntsc and pal specify the video format for TV output.
    This is supported on Savage3D only.
  With no parameters, displays all devices currently attached and active.

Dus volgens mij als je een savage kaart hebt kan je doen:
"sudo ./s3switch pal"
Dat zal volgens mij dan op alle actieve/aangesloten beeldapparaten beeld weergeven en pal duidt erop dat het TV video formaat pal moet zijn (PAL is europees en NTSC amerikaans dacht ik)

Citaat van: "Hij"
Ik ben ook zo weg (op bezoek), dus kan geen reactie meer terug schrijven als iemand hierop reageert, hopelijk vind je dit niet erg.
Is niet erg, sommige mensen hebben nu eenmaal een leven :)

PS: als deze discussie nog langer wordt, kan iemand (Seveas?) hem dan splitsen naar een nieuwe topic?
@Profox nog bedankt voor toen! Maar niet voor vandaag (haha) ;)

Weet iemand of dit kwaad kan voor mijn desktop pc?