Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: [opgelost] Samba file server share een harddisk  (gelezen 5208 keer)

Offline Badmuts

  • Lid
[opgelost] Samba file server share een harddisk
« Gepost op: 2011/11/28, 14:29:06 »
Beste,

Ben nu een beetje aan het rommelen met samba. Nu wil ik graag mijn harddisk delen (/media/a58) voor iedereen in mijn netwerk. Maar helaas krijg ik het niet voor elkaar dat iedereen de share kan openen. Ik krijg dan de melding dat mijn inloggegevens niet correct zijn terwijl ik deze nooit heb ingevuld en in samba heb beschreven dat er geen wachtwoord etc. nodig is.

Komt dit omdat media devices niet gedeeld kunnen worden?

Bij voorbaat dank

Met vriendelijke groet,
Daan

EDIT: Nu heb ik een test folder gemaakt en deze kan ik zonder probleem benaderen van elke pc. Ik heb de harddisk op dezelfde manier gedeeld (https://help.ubuntu.com/11.04/serverguide/C/samba-fileserver.html). Ik gebruik Ubuntu 11.10.
« Laatst bewerkt op: 2011/12/01, 15:28:58 door Badmuts »

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #1 Gepost op: 2011/11/28, 14:55:49 »
Het is een interne harddisk. Ubuntu draait op mijn SSD en daarnaast hangt deze 2TB Spinpoint. Deze komt dat in de /media folder te staan.

Re: Samba file server share een harddisk
« Reactie #2 Gepost op: 2011/11/28, 15:00:27 »
Zou een rechten issue kunnen zijn van de map zelf.
Je moet de map rechten in orde maken.

Geeft de map "/media/a58" het recht te lezen door anderen.
(Een andere methode zou kunnen zijn dat samba deze rechten aan maakt, maar ik weet niet zomaar hoe je dat doet.)

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #3 Gepost op: 2011/11/28, 15:03:05 »
Ik heb hem geprobeerd lid te maken van nobody.nogroup zoals in de tutorial. Alleen word deze weer automatisch terug veranderd.  :(

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #4 Gepost op: 2011/11/28, 15:26:36 »
Bedankt ik ga het even proberen :)

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #5 Gepost op: 2011/11/28, 15:38:46 »
Helaas, tot 2 keer toe veranderd hij alles weer terug naar de oude staat. Doe ik iets fout? Of is dit beveiliging?

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #6 Gepost op: 2011/11/28, 17:22:39 »
Ik heb GNOME Commander aan met root privileges.



Echter wanneer ik File -> Change Premissions kies en daar alles aan vink blijft de premission hetzelfde. Deze lijkt wel meteen terug gezet te worden.
« Laatst bewerkt op: 2011/11/28, 17:44:19 door Badmuts »

Re: Samba file server share een harddisk
« Reactie #7 Gepost op: 2011/11/28, 18:03:09 »
Het is echt een interne hd? Ik snap het gewoon niet. Normaal als je een interne hd hebt, en je zou het via ssh kunnen doen, dan kan iedere pc in huis deze bereiken, zolang die pc aanstaat.

Daarvoor is eerst de vraag of iedereen daar met Linux of Unix werkt?
Zo ja, dan is ssh idd makkelijker.
Voor windows kan je het volgens mij net zo goed via samba doen.

Ik kom er nu niet aan toe om hier wat te proberen.
Ik zal kijken of ik morgen een er aan toe kom.

Offline rja

  • Lid
Re: Samba file server share een harddisk
« Reactie #8 Gepost op: 2011/11/28, 18:58:16 »
Hoe ziet je /etc/samba/smb.conf eruit ?


Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #9 Gepost op: 2011/11/29, 08:13:39 »
Het is echt een interne schijf.

smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = MSHOMESS

# server string is the equivalent of the NT Description field
server string = UBUNTU-SERVER

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = no

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
; passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
; guest ok = no
; guest account = nobody
username map = /etc/samba/smbusers

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[A58]
comment = Ubuntu-server A58 share
path = /media/A58
; browseable = yes
writeable = yes
create mask = 0755
force user = daan
guest ok = yes
[TEST]
comment = Ubuntu share Test
path = /srv/samba/share
; browseable = yes
guest ok = yes
writeable = yes
create mask = 0775

Re: Samba file server share een harddisk
« Reactie #10 Gepost op: 2011/11/29, 14:49:10 »
Je smb.conf ziet er voor het grootste del goed uit.
Ik kom twee dingen tegen.
encrypt passwords = noZolang je de mappen deelt zonder wachtwoorden is het geen probleem.
Maar zodra je wachtwoorden gaat gebruiken zet deze dan op 'yes'.

force user = daanDeze zorgt waarschijnlijk juist voor problemen. Verwijder deze regel.

Verder is je cmb.conf op orde en zou het gewoon moeten werken.

Voor mij zelf wat ik thuis tegen kwam.
Bij het aanmaken van een smb share van een hele schijf is dat ik de rechten van die schijf moest instellen.
Dit was simpel mogelijk door de eigenschappen van '/media/data' te openen en dan tabblad rechten.
Dit kon ik gewoon als gebruiker doen.

Ik ga nu ff kijken wat er gebeurd met een ntfs partitie.
Is je schijf soms toevallig ntfs gepartitioneerd?

EDIT: Test met rechten bij een ntfs partitie gedaan. Rechten springen meteen weer terug naar originele instellingen. Presies zoals bij TS.
« Laatst bewerkt op: 2011/11/29, 15:00:32 door Erik Krom »

Offline rja

  • Lid
Re: Samba file server share een harddisk
« Reactie #11 Gepost op: 2011/11/29, 15:17:19 »
Op een NTFS partitie werken de Linux permissies niet.

De wijzigingen zijn maar tijdelijk.

Je kunt wel een user en groep en umask opgeven bij de mount opties van de harddisk.

Zie :

http://opensuse.swerdna.org/susentfs.html


Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #12 Gepost op: 2011/11/29, 16:27:08 »
Bedankt voor de reactie's =D

Ik heb inmiddels de smb.conf aangepast.

De harddisk is inderdaad NTFS gepationeerd. Is er een command om de hardeschijf te converteren, en naar wat voor filesystem moet deze worden geconverteerd?

Of is het aan te raden een user, group en umask toe te wijzen?
« Laatst bewerkt op: 2011/11/29, 16:40:49 door Badmuts »

Re: Samba file server share een harddisk
« Reactie #13 Gepost op: 2011/11/29, 16:59:20 »
Als de partitie (op die computer zelf) alleen door Linux wordt gebruikt zal ik adviseren deze te formatteren naar een ext4 indeling.
Een directe command om de partitie met behoud van de inhoud direct naar ext4 te convergeren is er helaas niet. (Voor zover ik weet.)

Dit zal je stap voor stap moeten doen.
1. Breng in inhoud van de schijf ergens anders onder. Anders gaan deze gegevens verloren.
2. Unmount de partitie.
3. Verwijder de ntfs partitie. Dit kan met 'Schijfgereedschap' of 'GParted'.
4. Maak de 'ext4' partitie. Kan ook met 'Schijfgereedschap' of 'GParted'.
5. Zet alle gegevens weer terug op de schijf.

Om de schijf automatisch te laten mounten bij het opstarten moet je de partitie toevoegen in fstab.
http://wiki.ubuntu-nl.org/community/Fstab

Ik weet niet hoe je het mounten v.d. ntfs partitie deed, maar mocht dat een specifieke instelling zijn. Dan moet die worden verwijderd.
« Laatst bewerkt op: 2011/11/29, 17:02:48 door Erik Krom »

Re: Samba file server share een harddisk
« Reactie #14 Gepost op: 2011/11/29, 19:56:26 »
Tuurlijk ff getest. (Handig om op enn hdd een stuk ongepartitioneerd te hebben zodat je dit soort dingen kan testen.)
En verhip. Je kan idd een partitie direct naar ext4 formatteren. (Weer wat geleerd.  :D)
Echter de map die ik er als test in had gezet was verdwenen.
Dus maak wel ff een backup van de inhoud.

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #15 Gepost op: 2011/11/29, 23:40:10 »
Ik weet dat je met windows een simpel convert commando geeft en alle data blijft dan op de schijf.

Ik heb nog niet kunnen ontdekken hoe ik met GParted de schijf kan converten, dit moet met een speciale live cd?

Re: Samba file server share een harddisk
« Reactie #16 Gepost op: 2011/11/30, 09:39:46 »
Bij windows was het convert commando er specifiek voor fat->ntfs.
Hier een topic op en ander linux forum waar het deels wordt uitgelegd waarom deze tool er niet voor Linux is.
http://www.linuxquestions.org/questions/linux-software-2/ntfs-to-ext4-814181/#post4004524

We blijven dus vast zitten aan de eerder beschreven methode.
Aangezien het geen elementaire partitie van het systeem is hoeven we het niet perse met de live-cd te doen.
Het kan gewoon vanuit je huidige Ubuntu installatie.

1. Stel de data van die schijf veilig. (Back-up)
2. Unmount de schijf.
3. In GParted selecteer de partitie en rechts klik.
4. Kies "Formatteren als >" dan "ext4".

Om het vanuit de terminal te doen moet ik ff zoeken.
Partitie bewerkingen heb ik nog nooit in de terminal gedaan.

Offline Badmuts

  • Lid
Re: Samba file server share een harddisk
« Reactie #17 Gepost op: 2011/12/01, 08:41:13 »
Ik heb het volgende gevonden: https://help.ubuntu.com/community/MountingWindowsPartitions

Na het installeren van het pakket kon ik de ntfs partitie wel goed delen

Heel erg bedankt voor jullie hulp! =D

Re: Samba file server share een harddisk
« Reactie #18 Gepost op: 2011/12/01, 10:30:02 »
Oeps die had ik nog niet getest.  :rolleyes:
Staat nota bene op mijn laptop en had alleen die partitie hoeven delen om het te testen.
Echter, ik had wel bij de rechten gekeken en die stonden op root. Hierdoor had ik het al afgeschreven.

In ieder geval weer wat geleerd vol de volgende keer.

Verder vergeet niet deze topic op [opgelost] te zetten.  ;)
« Laatst bewerkt op: 2011/12/01, 10:36:24 door Erik Krom »