Onder Edgy heb ik wel geluid met KDETV en PCTV kaart.
Hiervoor moest ik de volgende commando geven modprobe tda9887 qss=0 en de volgende regel options tda9887 qss=0 aan etc/modprobe.d/options toevoegen.
Bij Feisty hielp dit niet, ik hoor alleen een ruis.
Dit is de uitvoer van dmesg | grep bttv in feisty:
root@gijs-desktop:/home/gijs# dmesg | grep bttv
[ 42.391139] bttv: driver version 0.9.16 loaded
[ 42.391157] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 42.391227] bttv: Bt8xx card found (0).
[ 42.391268] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 16, latency: 32, mmio: 0xee800000
[ 42.391282] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[ 42.391286] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[ 42.391322] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 42.391798] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 42.392512] bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
[ 42.392515] bttv0: using tuner=33
[ 42.392519] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 42.393225] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 42.393932] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 42.438442] bttv0: registered device video0
[ 42.438476] bttv0: registered device vbi0
[ 42.438496] bttv0: PLL: 28636363 => 35468950 .. ok
[ 89.748669] bttv0: PLL can sleep, using XTAL (28636363).
[ 89.881565] bttv0: PLL: 28636363 => 35468950 .. ok
Iemand enig idee hoe ik wel geluid krijg?
Met vriendelijke groet,
Gijs
