Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: samba?  (gelezen 7044 keer)

Offline coolkil

  • Lid
samba?
« Gepost op: 2010/12/27, 22:35:26 »
ik wil graag een verbinding leggen tussen een windows (7) computer en ubuntu 10.10 ik heb samba geinstaleerd probeer al wat te delen maar ubuntu ziet windows niet en andersom hoe nu verder

Re: samba?
« Reactie #1 Gepost op: 2010/12/27, 23:36:55 »
Weet niet of je hier iets aan hebt, het probleem zit hem namelijk in de authenticatie van W7 met Samba.
http://forum.ubuntu-nl.org/server-en-netwerk/wachtwoord-netwerk-windows7/

Extra info:
http://www.tomshardware.com/forum/75-63-windows-samba-issue
« Laatst bewerkt op: 2010/12/27, 23:41:55 door donpedroII »
Ubuntu Pocket Guide and Reference - LinuxCommands.org - Manual Pages (man)

PC: Ubuntu 18.04 LTS /  Intel Core i5 8600 / Gigabyte B360M DS3H / Samsung 970 EVO / Corsair Vengeance LPX 16GB

Re: samba?
« Reactie #2 Gepost op: 2010/12/27, 23:39:39 »
bij mij hielp het op op de w7 pc een wachtwoord te zetten (1 bij starten van je pc).
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline Ron

  • Forumteam
    • r0n
    • Over Tholen
Re: samba?
« Reactie #3 Gepost op: 2010/12/27, 23:44:44 »
Installeer de grafische omgeving van Samba, dat werk veel makkelijker.
system-config-samba is een makkelijk programma !
Openstandaard Evangelist, OpenSource Promotor, OpenData voorstander.
Xubuntu gebruiker en voorstander
Er is ook nog een andere hobby.

Offline coolkil

  • Lid
Re: samba?
« Reactie #4 Gepost op: 2010/12/28, 09:16:44 »
okee ik moet wel effe vermelden dat dit echt de aller eerste keer is dat ik ubuntu gebruik
ron: wat bedoel je met de grafische omgeving van samba volgens mij heb ik die al staat onder systeem>beheer>samba (hoe gebruik ik dat goed)

pcschouten: ik heb een wacht woord op mijn win 7 pc

donpedroll: ik doe liever geen registery hacks op mijn windows pc aangezien  ik die voor alles gebruik en ik de andere pc heb als een pc waar alles mee kan (hobby pc)

okee dit is vaag ubuntu ziet ineens win7 wel en als ik daar op klik kan ik mijn wachtwoord in vullen maar dat schermpje komt de hele tijd terug  vista is mijn pa zijn computer kom ik wel gewoon in zonder gedoe
« Laatst bewerkt op: 2010/12/28, 09:43:25 door coolkil »

Offline Ron

  • Forumteam
    • r0n
    • Over Tholen
Re: samba?
« Reactie #5 Gepost op: 2010/12/28, 10:00:12 »
wat bedoel je met de grafische omgeving van samba volgens mij heb ik die al staat onder systeem>beheer>samba (hoe gebruik ik dat goed)
Wanneer je vanuit nautilus (de verkenner) files wilt gaan delen, dan is het (soms) moeilijk om e.e.a. te configureren.
Jij hebt al het juiste pakket, dus dit mag m.i. geen probleem zijn.
Gewoon samba openen (system > beheer . samba) en aanklikken wat je wilt delen.
Openstandaard Evangelist, OpenSource Promotor, OpenData voorstander.
Xubuntu gebruiker en voorstander
Er is ook nog een andere hobby.

Offline coolkil

  • Lid
Re: samba?
« Reactie #6 Gepost op: 2010/12/28, 14:17:37 »
okee ik heb in samba 1 hele partitie gedeeld maar mijn windows pc ziet hem nog steeds niet (de partitie is btw geformateerd in fat)
andersom ook niet (meer)
het is heel apart het is net of mijn vaders laptop een soort van host is in het netwerk. staat zijn laptop aan dan zie ik in ubuntu mijn windows pc. in windows echter zie ik mijn ubuntu pc niet.
« Laatst bewerkt op: 2010/12/28, 14:21:11 door coolkil »

Offline Ron

  • Forumteam
    • r0n
    • Over Tholen
Re: samba?
« Reactie #7 Gepost op: 2010/12/28, 15:03:31 »
Zitten ze beiden op hetzelfde netwerk, met een IP adres 192.168.1.xx (als voorbeeld) ?
Openstandaard Evangelist, OpenSource Promotor, OpenData voorstander.
Xubuntu gebruiker en voorstander
Er is ook nog een andere hobby.

sprokkel

  • Gast
Re: samba?
« Reactie #8 Gepost op: 2010/12/28, 15:30:40 »
Gewoon NTFS ;)

Offline Mikkel

  • Lid
Re: samba?
« Reactie #9 Gepost op: 2010/12/28, 20:46:34 »
Ook een in FAT-geformatteerde pc kan gewoon in een Linux-Windows-netwerk draaien. Overschakelen naar NTFS is hier dus niet dé oplossing. ;) Bovendien.......... overschakelen (dus: formatteren) naar een ander formaat houdt in dat je eerst alle data van die bepaalde schijf/partitie moet back-uppen en later weer terugzetten, dus dat duurt iets langer dan 'even'. En als op die bepaalde partitie toevallig Windows staat geïnstalleerd duurt 'even' wel heel erg lang. O0

Coolkill: in Ubuntu heb je Samba nodig om de verbinding te leggen naar een Windows-pc, maar die Windows-pc moet je natuurlijk wél voorbereiden door de Netwerk-wizzard (heet dat nog steeds zo in Windows 7....?) te draaien, waarbij álle pc's/laptops/printers die in dat netwerk moeten komen, aan moeten staan.

Re: samba?
« Reactie #10 Gepost op: 2010/12/28, 23:08:14 »
in windows 7 (werk ik mee) werkt het zo bij mij idd.

je gaat naar verkenner > netwerk > krijg je een balk te zien met netwerk blabla bla moet je accepteren (daarna komt hij niet meer)> wachten tot je pc/server ertussen komt te staan> aanklikken> eventueel wachtwoorden enzo invoeren als je die in hebt gesteld bij samba> en klaar.


het kan ook zijn dat je netwerk op je w7 in is gesteld als openbaar en dan laat hij niks zien. dit moet thuisnetwerk zijn.
netwerkcentrum> onder het woord network staat hoe hij is ingesteld en kan je veranderen door erop te klikken.

zet je samba.conf eens neer om te bekijken
« Laatst bewerkt op: 2010/12/28, 23:13:47 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline coolkil

  • Lid
Re: samba?
« Reactie #11 Gepost op: 2010/12/29, 09:24:23 »
okee mijn laptop(win 7) is natuurlijk in ntfs geformtateerd ik heb op mijn ubuntu pc alleen een partitie die in fat is geformateerd dat omdat windows geen ext 4 kan zien daar komt nog bij dat mijn laptop deel uitmaakt van een netwerk en ik kan op ubuntu soms mijn laptop zien maar dan moet ook mijn vaders laptop aan staan(vaag...?) in mijn windows pc is het mij nog nooit gelukt om ubuntu te zien en wat bedoel je met samba confg(screenshotje?)

Re: samba?
« Reactie #12 Gepost op: 2010/12/29, 11:00:55 »
wat bedoel je met samba confg(screenshotje?)

ga naar persoonlijke map > bestandssysteem>etc>samba> samba.conf.
open samba.conf en kopieer de tekst en plaats die hier neer met code optie. # teken bij de opties hierboven.

okee mijn laptop(win 7) is natuurlijk in ntfs geformtateerd ik heb op mijn ubuntu pc alleen een partitie die in fat is geformateerd dat omdat windows geen ext 4 kan zien.

door samba heen kan win ext 4 prima lezen. mijn server staat ook in ext4 en heb nergens problemen mee.
weer terug van weg geweest gebruik ubuntu 12.04 weer

Re: samba?
« Reactie #13 Gepost op: 2010/12/29, 11:11:40 »
@Mikkel

Citaat
Bovendien.......... overschakelen (dus: formatteren) naar een ander formaat houdt in dat je eerst alle data van die bepaalde schijf/partitie moet back-uppen en later weer terugzetten, dus dat duurt iets langer dan 'even'.

Ik dacht van niet, ik heb dit al vele malen gedaan op Windows systemen, mét behoud van alle data, op de volgende manier:

Citaat
Fat 32 naar NTFS converteren !

Maak voor alle zekerheid éérst een back-up van de gegevens op de schijf/partitie die men wil converteren.
Kies Start/Uitvoeren en typ cmd , bevestig met OK.
Typ achter de Dos–prompt de volgende opdracht :

convert x : /FS : NTFS gevolgd door een druk op Enter.

Verander in het voorbeeld de x door de letter van de schijf | partitie die men wil converteren. Het is mogelijk dat de conversie pas wordt uitgevoerd na een heropstart van de computer. Dit is alles wat men moet doen om zijn schijf | partitie om te zetten van Fat 32 naar NTFS.

Zoals ik hierboven al aangaf, dit is een veilige én gemakkelijke manier om een schijf of partitie om te zetten zonder dataverlies. Ik denk dat dit in Windows 7 niet zal veranderd zijn toch?
« Laatst bewerkt op: 2010/12/29, 11:13:17 door Progger »
Laptop MSI U123 (160 GB) 1 GB ramMint Cinnamon 18 LTS
Laptop Toshiba Tecra  (80GB) 2 GB ram Fedora 24
Dell Latitude D600 Pentium M 1400MHz 512MB ram
Bouwjaar 2003 met Debian 8 (Jessie)

Offline coolkil

  • Lid
Re: samba?
« Reactie #14 Gepost op: 2010/12/29, 11:21:08 »
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = no

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

dit is wat er staat

progger mijn win 7 pc is geformateerd in ntfs ik snap heel goed de problemen van fat het is een partitie op de pc waar ook ubuntu opstaat

Re: samba?
« Reactie #15 Gepost op: 2010/12/29, 11:25:52 »
Citaat
progger mijn win 7 pc is geformateerd in ntfs ik snap heel goed de problemen van fat het is een partitie op de pc waar ook ubuntu opstaat

Het antwoord dat ik had gezet was voor de reactie van @Mikkel, niet aan jou direct.  ;)
Laptop MSI U123 (160 GB) 1 GB ramMint Cinnamon 18 LTS
Laptop Toshiba Tecra  (80GB) 2 GB ram Fedora 24
Dell Latitude D600 Pentium M 1400MHz 512MB ram
Bouwjaar 2003 met Debian 8 (Jessie)

Offline jan11000

  • Lid
Re: samba?
« Reactie #16 Gepost op: 2010/12/29, 11:27:53 »
-Misschien helpt dit.
http://www.ghacks.net/2010/12/27/setup-ubuntu-to-browse-windows-network-by-hostname/

-De samba share, wat voor file systeem hij heeft maakt niks uit, je windows of linux vertaald dit zodat de ander pc's het gewoon kunnen lezen.

-Zelf maak ik op het netwerk(via samba en xp), verbinding met andere pc's op deze manier.
pulldown,
places-connect to server-
dan windows share kiezen
dan ip nummer van ander pc ingeven,
en dan lang wachten(bij mij tenminste)
(zoeken op het netwerk werkte bij mij niet goed)
indien je verbinding hebt, dit opslaan in nautilus als favoriet.

-Of dit nodig is weet ik niet, maar de host file heb ik ook gewijzigd( etc/host).
dwz ik heb er dit in staan, erbij gezet.
127.0.0.1   localhost
127.0.1.1   klaas2
10.16.1.6       test

127.0.0.1  klaas2  is de pc waar ik aan zit, dit is dus de naam van de pc.
10.16.1.6   test     is een andere pc, dit is de naam van de pc(zie andere pc).
localhost is standaard.
Door dit toe te voegen zie bij netwerk 2 extra pc's verschijnen, met naam, dit kun je dus voor elke pc doen.
Mijn pc's hebben vaste ip nummers.

-Ik heb ook al gemerkt dat welke pc als eerste opstart ook soms wat kan uitmaken of je de pc ziet, zeker bij de oudere ubuntu versie's.

Offline jan11000

  • Lid
Re: samba?
« Reactie #17 Gepost op: 2010/12/29, 11:29:42 »
In je samba file zie ik geen samba share, normaal moet dit onderaan staan.

Voor windows 7 heb ik een register wijziging gezien die nodig was om met een mediaplayer verbinding te maken, dus of jij dat moet doen weet ik niet. Waar het stond weet ik ook niet.

Zoek eens met google
ubuntu+samba+windows7

edit:
probeer eens windows xp?
« Laatst bewerkt op: 2010/12/29, 11:47:32 door jan11000 »

Offline jan11000

  • Lid
Re: samba?
« Reactie #18 Gepost op: 2010/12/29, 11:38:43 »
samba share maak ik zo:

gksu system-config-samba (is samba)installeren.
User maken in ubuntu die hetzelfde is als de binnenkomende pc(dus windows, hetzelfde user en wachtwoord)
gksu system-config-samba starten,
dan share maken, dus map kiezen,
dan users aangeven die op de share mogen komen(die je net erbij hebt gemaakt)
naam van server aangeven of zo laten, naam workgroup hetzelfde als de win pc maken,
security, no guest account, user aanmelden,

Om het veiliger te maken.
Op elke pc een ander user maken.
Deze user mogen op de andere pc alleen als samba user iets doen(zeker geen admin maken), daarom op elke pc een ander user maken.
Je kan als alles werkt de de extra user gaan beperken wat hij mag doen, zolang de samba blijft werken.
Firewall kun je ook installeren om samba te blokkeren om naar het internet te gaan.
In de samba config file staat ook iets om de ip nummers te blokkeren zodat je naar het inernet kunt blokkeren, indien je 2 netwerkkaarten gebruikt kun je ook de internet netwerkkaart blokkeren, weer en stuk veiliger.

« Laatst bewerkt op: 2010/12/29, 11:44:52 door jan11000 »

Re: samba?
« Reactie #19 Gepost op: 2010/12/29, 12:05:22 »
zijn samba

ik denk dat ik weet waarom win7 je samba niet ziet.
er is geen nieuwe map gedeeld.
deel eens een map dat doet wonderen.
dan pas kan windows een andere pc zien.

zoiets als hieronder (dit was mijn samba.conf)
het dikgedrukte is een gedeelde map die ik bij jou mis.
[global]
workgroup = WORKGROUP
hosts allow = 127. 192.168.1. 10.8.0.0/24
; load printers = yes
printcap name = /etc/printcap
max log size = 50
security = user
; socket options = tcp_nodelay
interfaces = 127.0.0.1/8 192.168.1.0/24
os level = 33
domain master = yes
preferred master = yes
domain logons = yes
wins support = yes
logon script = logon.bat
        printcap name = cups
disable spools = Yes
show add printer wizard = No
printing = cups

[printers]
comment = All Printers
path = /var/spool/samba
; browseable = yes
; writable = No
; guest ok = no
printable = yes
locking = no
strict locking = no

[b][download][/b]
comment = download
path = /media/download
; writeable = no
; browseable = yes

[sdc2]
comment = muziek
path = /media/sdc2
; writeable = no
; browseable = yes


[sdc1]
comment = films1
path = /media/sdc1
; writeable = no
; browseable = yes

« Laatst bewerkt op: 2010/12/29, 12:12:37 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline coolkil

  • Lid
Re: samba?
« Reactie #20 Gepost op: 2010/12/29, 12:18:35 »
okee ik heb weer wat te doen ondertussen heb ik ook nog een smb.conf file gevonden is die ook nuttig zet hem  er ook bij
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
# However, use this with caution if your smb.conf file contains nested
# "include" statements. See Debian bug #483187 for a case
# where using a master file is not a good idea.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = FAMBEUKERS

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
#   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
; encrypt passwords = yes

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
; passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
usershare allow guests = yes
username map = /etc/samba/smbusers
security = user
; guest ok = no
; guest account = nobody

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
; browseable = yes
; read only = yes
; guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
# cdrom share is accesed. For this to work /etc/fstab must contain
# an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
# is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[Documenten]
path = /home/chris/Documenten
writeable = yes
; browseable = yes
guest ok = yes

[D schijf]
path = /media/D schijf
writeable = yes
; browseable = yes
guest ok = yes

als ik jou global zie zijn dat allemaal zinnen ondermekaar die iets aan geven bij mij is het meer een readme bestand heb ik het verkeerde bestand of zo
« Laatst bewerkt op: 2010/12/29, 12:27:05 door coolkil »

Re: samba?
« Reactie #21 Gepost op: 2010/12/29, 12:28:15 »

als ik jou global zie zijn dat allemaal zinnen ondermekaar die iets aan geven bij mij is het meer een readme bestand heb ik het verkeerde bestand of zo

klopt wel hoor ik heb gewoon de tekst ertussenuit gehaald.
heb ik ook voor jou gedaan kan je verschillen bekijken

#======================= Global Settings =======================

[global]

workgroup = FAMBEUKERS
server string = %h server (Samba, Ubuntu)
wins support = no
; wins server = w.x.y.z
dns proxy = no
;   name resolve order = lmhosts host wins bcast

#### Networking ####


;   interfaces = 127.0.0.0/8 eth0
;   bind interfaces only = yes



#### Debugging/Accounting ####


log file = /var/log/samba/log.%m
max log size = 1000
#   syslog only = no
syslog = 0
panic action = /usr/share/samba/panic-action %d


####### Authentication #######


#   security = user
; encrypt passwords = yes
; passdb backend = tdbsam
obey pam restrictions = yes
unix password sync = yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
pam password change = yes
map to guest = bad user

########## Domains ###########


;   domain logons = yes
;   logon path = \\%N\profiles\%U
;   logon drive = H:
#   logon home = \\%N\%U
;   logon script = logon.cmd
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########


#   load printers = yes
;   printing = bsd
;   printcap name = /etc/printcap
; printing = cups
;   printcap name = cups

############ Misc ############


;   include = /home/samba/etc/smb.conf.%m
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
#   domain master = auto
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash
;   winbind enum groups = yes
;   winbind enum users = yes
; usershare max shares = 100
usershare allow guests = yes
username map = /etc/samba/smbusers
security = user
; guest ok = no
; guest account = nobody

#======================= Share Definitions =======================


;[homes]
;   comment = Home Directories
;   browseable = no
;   read only = yes
;   create mask = 0700
;   directory mask = 0700
;   valid users = %S


;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no


;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
; guest ok = no
; read only = yes
create mask = 0700


[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
; browseable = yes
; read only = yes
; guest ok = no

;   write list = root, @lpadmin


;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes


;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[Documenten]
path = /home/chris/Documenten
writeable = yes
; browseable = yes
guest ok = yes

[D schijf]
path = /media/D schijf
writeable = yes
; browseable = yes
guest ok = yes

ik zou de win support eerst ook op yes zetten
en de interface wat is de ip van je win7 pc?
« Laatst bewerkt op: 2010/12/29, 12:30:12 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline coolkil

  • Lid
Re: samba?
« Reactie #22 Gepost op: 2010/12/29, 12:46:52 »
het ip adres wat ik uit mijn laptop krijg is 192.168.0.3 subnet is 255.255.255.0 standaard gateway is 192.168.0.1

[global]
workgroup = FAMBEUKERS
server string = %h server (Samba, Ubuntu)
wins support = yes
;wins server = w.x.y.z
dns proxy = no
;name resolve order = lmhosts host wins bcast

#### Networking ####
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####


log file = /var/log/samba/log.%m
max log size = 1000
syslog only = no
syslog = 0
panic action = /usr/share/samba/panic-action %d


####### Authentication #######


security = user
;encrypt passwords = yes
;passdb backend = tdbsam
obey pam restrictions = yes
unix password sync = yes
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
pam password change = yes
map to guest = bad user

########## Domains ###########


;domain logons = yes

;logon path = \\%N\profiles\%U
;logon drive = H:
logon home = \\%N\%U
;logon script = logon.cmd
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########


 load printers = yes

;printing = bsd
;printcap name = /etc/printcap
;printing = cups
;printcap name = cups

zo moet het dus al beter werken dit is nog niet die file ik heb hem eerst gekopierd naar bureablad en toen aangepast of mag ik die file niet aanpassen

Re: samba?
« Reactie #23 Gepost op: 2010/12/29, 12:54:10 »
het orgineel moet je even ergens een back up van opslaan.
en dan je aangepaste ervoor in de plek zetten en kijken of hij het doet.

ik zou gewoon een copie van het orgineel aanpassen en gebruiken (dus gewoon de tekst laten staan en die 2 kleine dingen aanpassen.)

het volgende moet je even aanpassen.
bij interfaces moet je ;   interfaces = 127.0.0.0/8 eth0 192.168.0.
« Laatst bewerkt op: 2010/12/29, 12:56:00 door pcschouten »
weer terug van weg geweest gebruik ubuntu 12.04 weer

Offline coolkil

  • Lid
Re: samba?
« Reactie #24 Gepost op: 2010/12/29, 13:24:51 »
okee gedaan nu nog 1 probleem hoe word ik eigenaar van die map want hij zegt dat root de eigenaar is van die map