lukt me niet, na de herstart:
dirk@ubuntu:~$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
dirk@ubuntu:~$ sensors-detect
You need to be root to run this script.
dirk@ubuntu:~$ sudo sensors-detect
[sudo] password for dirk:
# sensors-detect revision 5016 (2007-11-11 22:20:16 +0100)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no): j
Probing for PCI bus adapters...
Use driver `i2c-sis96x' for device 0000:00:02.1: Silicon Integrated Systems SMBus Controller
We will now try to load each adapter module in turn.
Module `i2c-sis96x' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no): j
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SiS96x SMBus adapter at 0x10c0 (i2c-0)
Do you want to scan it? (YES/no/selectively): j
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Next adapter: saa7133[0] (i2c-1)
Do you want to scan it? (YES/no/selectively): j
Client found at address 0x4b
Handled by driver `tuner' (already loaded), chip type `tda8290+75a'
(note: this is probably NOT a sensor chip!)
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... No
Client found at address 0x70
Probing for `Philips Semiconductors PCA9540'... Success!
(confidence 1, driver `pca9540')
Client found at address 0x73
Probing for `FSC Poseidon II'... No
Probing for `FSC Heimdal'... No
Probing for `FSC Heracles'... No
Probing for `FSC Poseidon I'... No
Probing for `FSC Hermes'... No
Probing for `FSC Scylla'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no): j
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `Silicon Integrated Systems SIS5595'... No
Probing for `VIA VT82C686 Integrated Sensors'... No
Probing for `VIA VT8231 Integrated Sensors'... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): j
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... Yes
Found `Winbond W83627HF/F/HG/G Super IO Sensors' Success!
(address 0x290, driver `w83627hf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some CPUs or memory controllers may also contain embedded sensors.
Do you want to scan for them? (YES/no): j
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `pca9540' (should be inserted):
Detects correctly:
* Bus `saa7133[0]'
Busdriver `UNKNOWN', I2C address 0x70
Chip `Philips Semiconductors PCA9540' (confidence: 1)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `Winbond W83627HF/F/HG/G Super IO Sensors' (confidence: 9)
I will now generate the commands needed to load the required modules.
Just press ENTER to continue:
To load everything that is needed, add this to /etc/modules:
#----cut here----
# I2C adapter drivers
# modprobe unknown adapter saa7133[0]
# Chip drivers
# Warning: the required module pca9540 is not currently installed
# on your system. For status of 2.6 kernel ports check
# http://www.lm-sensors.org/wiki/Devices. If driver is built
# into the kernel, or unavailable, comment out the following line.
pca9540
w83627hf
#----cut here----
Do you want to add these lines automatically? (yes/NO)j
dirk@ubuntu:~$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.hij laad ze waarschijnlijk niet automatisch
(komt dat misschien omdat m'n computer te heet loopt en zo ja hoe kan ik dat zien?)
zal ze dadelijk handmatig toevoegen...
hoefde niet in 7.10
