activering scanner
lsusb uitslag
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046d:c30e Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 046d:c50d Logitech, Inc.
Bus 001 Device 004: ID 043d:00e9 Lexmark International, Inc.
Bus 001 Device 001: ID 0000:0000
/etc/udev/rules.d/025_libsane-extras.rules
# 025_libsane-extras.rules
# CUSTOMIZE BELOW THE RIGHT IdProduct looking at lsusb !!!!!!
## Lexmark
# Lexmark|x1250
SYSFS{idVendor}=="043d", SYSFS{idProduct}=="00e9", MODE="664", GROUP="scanner"
uitslag sane-find-scanner
sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x043d [Lexmark], product=0x00e9 [ 2400 Series]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
uitslag scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Scanner (X2450) is aangesloten en staat aan en wordt wel gedetecteerd door sane-find-scanner
Wat ik graag wil weten is of de code in libsane-extras.rules goed is?