Ik heb de artikelen doorgenomen, maar stuit op de volgende problemen:
(The current version of X.org don't use the xorg.conf by default but try to recognize everything automatically) Er is geen xorg.conf aanwezig bij mij.
de resolutie van 1024x768 lijkt bekend (wordt ook ingesteld als monitor direct op pc is aangesloten)
hier wat outputs:
robby@Ubuntu-500Mhz:~$ xrandr
Screen 0: minimum 320 x 240, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 60.0* 56.0
640x480 60.0
400x300 60.0 56.0
320x240 60.0
1024x768_60.00 (0x11e) 63.0MHz
h: width 1024 start 1072 end 1176 total 1328 skew 0 clock 47.4KHz
v: height 768 start 771 end 775 total 798 clock 59.4Hz
robby@Ubuntu-500Mhz:~$ xrandr --Screen 0 --mode 1024x768
usage: xrandr [options]
where options are:
-display <display> or -d <display>
-help
-o <normal,inverted,left,right,0,1,2,3>
or --orientation <normal,inverted,left,right,0,1,2,3>
-q or --query
-s <size>/<width>x<height> or --size <size>/<width>x<height>
-r <rate> or --rate <rate> or --refresh <rate>
-v or --version
-x (reflect in x)
-y (reflect in y)
--screen <screen>
--verbose
--dryrun
--nograb
--prop or --properties
--fb <width>x<height>
--fbmm <width>x<height>
--dpi <dpi>/<output>
--output <output>
--auto
--mode <mode>
--preferred
--pos <x>x<y>
--rate <rate> or --refresh <rate>
--reflect normal,x,y,xy
--rotate normal,inverted,left,right
--left-of <output>
--right-of <output>
--above <output>
--below <output>
--same-as <output>
--set <property> <value>
--scale <x>x<y>
--transform <a>,<b>,<c>,<d>,<e>,<f>,<g>,<h>,<i>
--off
--crtc <crtc>
--panning <w>x<h>[+<x>+<y>[/<track:w>x<h>+<x>+<y>[/<border:l>/<t>/<r>/<b>]]]
--gamma <r>:<g>:<b>
--primary
--noprimary
--newmode <name> <clock MHz>
<hdisp> <hsync-start> <hsync-end> <htotal>
<vdisp> <vsync-start> <vsync-end> <vtotal>
[+HSync] [-HSync] [+VSync] [-VSync]
--rmmode <name>
--addmode <output> <name>
--delmode <output> <name>
Doe ik soms iets fout bij de opdracht: xrandr --output Screen 0 --mode 1024*768 ?