[ Ipod wordt niet herkend bij aansluiten.
Ik ben volledig overgeschakeld op Ubuntu Gutsy(dev/sda1 :200GB) tot mij grote tevredenheid met een zelfgemaakte CD van het Isobestand(en dat als senior met weinig computer verstand).Het is een verademing Windows Kwijt te zijn ware het niet dat Ubuntu mijn iPod(160GBmet instelling :FAT 32, gebruik als schijf activeren,iTunes niet aansluiten )volledig negeert..Ik heb er alles op nagelezen in het forum en de documentatie maar het lukt niet .Gisteren met het command 'dmesg' kreegjg ik net nadat ik de ipod via een usb2 poort heb aangesloten het volgende/Ik Verstond er niets van en besloot om hulp te roepen.
[ 21.794042] ACPI: Core revision 20070126
[ 21.794105] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 21.796015] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[ 21.796034] Total of 1 processors activated (3983.65 BogoMIPS).
[ 21.796200] ENABLING IO-APIC IRQs
[ 21.796391] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.836072] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 21.836121] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 21.836123] ...trying to set up timer as Virtual Wire IRQ... works.
[ 21.981212] Brought up 1 CPUs
[ 21.981309] Booting paravirtualized kernel on bare hardware
[ 21.981387] Time: 16:06:36 Date: 10/21/107
[ 21.981407] NET: Registered protocol family 16
[ 21.981478] EISA bus registered
[ 21.981492] ACPI: bus type pci registered
[ 21.982164] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 21.982166] PCI: Using configuration type 1
[ 21.982167] Setting up standard PCI resources
[ 21.987969] ACPI: EC: Look up EC in DSDT
[ 24.186946] ACPI: Interpreter enabled
[ 24.186949] ACPI: (supports S0 S1 S3 S4 S5)
[ 24.186963] ACPI: Using IOAPIC for interrupt routing
[ 24.193859] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.193867] PCI: Probing PCI hardware (bus 00)
[ 24.195569] PCI: Transparent bridge - 0000:00:14.4
[ 24.195602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.195687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 24.195767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 24.202146] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202244] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202339] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202530] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202637] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 24.202731] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202826] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 24.202895] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.202904] pnp: PnP ACPI init
[ 24.202914] ACPI: bus type pnp registered
[ 24.206914] pnp: PnP ACPI: found 14 devices
[ 24.206916] ACPI: ACPI bus type pnp unregistered
[ 24.206920] PnPBIOS: Disabled by ACPI PNP
[ 24.206962] PCI: Using ACPI for IRQ routing
[ 24.206965] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.218180] NET: Registered protocol family 8
[ 24.218182] NET: Registered protocol family 20
[ 24.218236] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
[ 24.218241] pnp: 00:0a: ioport range 0xe00-0xe7f has been reserved
[ 24.218245] pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[ 24.218248] pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 24.218252] pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 24.218256] pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 24.218259] pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 24.218262] pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 24.218265] pnp: 00:0d: iomem range 0x100000-0x1fffffff could not be reserved
[ 24.218542] Time: tsc clocksource has been installed.
[ 24.248457] PCI: Bridge: 0000:00:02.0
[ 24.248459] IO window: 7000-7fff
[ 24.248462] MEM window: ff200000-ff2fffff
[ 24.248464] PREFETCH window: fab00000-feafffff
[ 24.248467] PCI: Bridge: 0000:00:14.4
[ 24.248471] IO window: 8000-8fff
[ 24.248477] MEM window: ff300000-ff3fffff
[ 24.248482] PREFETCH window: 30000000-300fffff
[ 24.248495] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.248512] NET: Registered protocol family 2
[ 24.286506] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 24.286553] TCP established hash table entries: 16384 (order: 5, 196608 bytes)
[ 24.286715] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 24.286821] TCP: Hash tables configured (established 16384 bind 16384)
[ 24.286823] TCP reno registered
[ 24.298557] checking if image is initramfs... it is
[ 24.749936] Switched to high resolution mode on CPU 0
[ 24.891187] Freeing initrd memory: 7325k freed
[ 24.891517] audit: initializing netlink socket (disabled)
[ 24.891530] audit(1195661198.184:1): initialized
[ 24.892925] VFS: Disk quotas dquot_6.5.1
[ 24.892962] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 24.893038] io scheduler noop registered
[ 24.893040] io scheduler anticipatory registered
[ 24.893042] io scheduler deadline registered
[ 24.893055] io scheduler cfq registered (default)
[ 24.893063] PCI: MSI quirk detected. MSI deactivated.
[ 24.941605] Boot video device is 0000:01:00.0
[ 24.941671] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.941689] assign_interrupt_mode Found MSI capability
[ 24.941692] Allocate Port Service[0000:00:02.0:pcie00]
[ 24.941784] isapnp: Scanning for PnP cards...
[ 25.295946] isapnp: No Plug & Play device found
[ 25.315158] Real Time Clock Driver v1.12ac
[ 25.315242] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 25.315371] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.315552] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 25.316016] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.316247] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 25.316393] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 25.316631] 0000:02:00.0: ttyS2 at I/O 0x8808 (irq = 16) is a 16450
[ 25.316795] 0000:02:00.0: ttyS3 at I/O 0x8810 (irq = 16) is a 8250
[ 25.316863] Couldn't register serial port 0000:02:00.0: -28
[ 25.317290] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 25.317463] input: Macintosh mouse button emulation as /class/input/input0
[ 25.317547] PNP: No PS/2 controller found. Probing ports directly.
[ 25.320209] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.320214] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 25.320340] mice: PS/2 mouse device common for all mice
[ 25.320425] EISA: Probing bus 0 at eisa.0
[ 25.320460] Cannot allocate resource for EISA slot 7
[ 25.320462] Cannot allocate resource for EISA slot 8
[ 25.320463] EISA: Detected 0 cards.
[ 25.320544] TCP cubic registered
[ 25.320555] NET: Registered protocol family 1
[ 25.320574] Using IPI No-Shortcut mode
[ 25.320735] Magic number: 15:370:136
[ 25.321159] Freeing unused kernel memory: 364k freed
[ 26.489717] AppArmor: AppArmor initialized<5>audit(1195661199.684:2): type=1505 info="AppArmor initialized" pid=1215
[ 26.496636] fuse init (API version 7.8)
[ 26.500206] Failure registering capabilities with primary security module.
[ 26.514344] ACPI: duty_cycle spans bit 4
[ 26.931148] SCSI subsystem initialized
[ 26.935031] libata version 2.21 loaded.
[ 26.936003] sata_sil 0000:00:11.0: version 2.2
[ 26.936057] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 26.936131] scsi0 : sata_sil
[ 26.936167] scsi1 : sata_sil
[ 26.936371] ata1: SATA max UDMA/100 cmd 0xe0848c80 ctl 0xe0848c8a bmdma 0xe0848c00 irq 17
[ 26.936376] ata2: SATA max UDMA/100 cmd 0xe0848cc0 ctl 0xe0848cca bmdma 0xe0848c08 irq 17
[ 26.967425] usbcore: registered new interface driver usbfs
[ 26.967446] usbcore: registered new interface driver hub
[ 26.967464] usbcore: registered new device driver usb
[ 26.970712] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 27.061384] 8139too Fast Ethernet driver 0.9.28
[ 27.207381] FDC 0 is a post-1991 82077
[ 27.514643] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 27.523267] ata1.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
[ 27.523270] ata1.00: 390721968 sectors, multi 16: LBA48
[ 27.539234] ata1.00: configured for UDMA/100
[ 27.850237] ata2: SATA link down (SStatus 0 SControl 300)
[ 27.850333] scsi 0:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
[ 27.850665] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 27.850718] scsi2 : sata_sil
[ 27.850835] scsi3 : sata_sil
[ 27.851118] ata3: SATA max UDMA/100 cmd 0xe0876880 ctl 0xe087688a bmdma 0xe0876800 irq 18
[ 27.851123] ata4: SATA max UDMA/100 cmd 0xe08768c0 ctl 0xe08768ca bmdma 0xe0876808 irq 18
[ 28.161878] ata3: SATA link down (SStatus 0 SControl 300)
[ 28.473518] ata4: SATA link down (SStatus 0 SControl 300)
[ 28.474150] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.474164] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 28.474451] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 28.474471] ohci_hcd 0000:00:13.0: irq 19, io mem 0xff6fe000
[ 28.533775] usb usb1: configuration #1 chosen from 1 choice
[ 28.533895] hub 1-0:1.0: USB hub found
[ 28.533905] hub 1-0:1.0: 4 ports detected
[ 28.637629] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.637643] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 28.637755] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 28.637771] ohci_hcd 0000:00:13.1: irq 19, io mem 0xff6fd000
[ 28.697573] usb usb2: configuration #1 chosen from 1 choice
[ 28.697694] hub 2-0:1.0: USB hub found
[ 28.697704] hub 2-0:1.0: 4 ports detected
[ 28.801527] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.801540] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 28.801675] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 28.801721] ehci_hcd 0000:00:13.2: irq 19, io mem 0xff6fc000
[ 28.940976] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 28.940995] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.941112] usb usb3: configuration #1 chosen from 1 choice
[ 28.941134] hub 3-0:1.0: USB hub found
[ 28.941139] hub 3-0:1.0: 8 ports detected
[ 29.049194] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 29.049199] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 29.049833] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 29.049852] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 20
[ 29.049863] ATIIXP: chipset revision 0
[ 29.049865] ATIIXP: not 100% native mode: will probe irqs later
[ 29.049874] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
[ 29.049889] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
[ 29.049898] Probing IDE interface ide0...
[ 29.064868] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 29.064880] sd 0:0:0:0: [sda] Write Protect is off
[ 29.064883] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.064895] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.064941] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 29.064948] sd 0:0:0:0: [sda] Write Protect is off
[ 29.064950] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.064961] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.064965] sda: sda1 sda2 < sda5 >
[ 29.104267] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.108013] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.324374] Attempting manual resume
[ 29.324378] swsusp: Resume From Partition 8:5
[ 29.324379] PM: Checking swsusp image.
[ 29.324639] PM: Resume from disk failed.
[ 29.338673] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.338677] EXT3-fs: write access will be enabled during recovery.
[ 29.616199] Probing IDE interface ide1...
[ 29.991781] usb 3-2: new high speed USB device using ehci_hcd and address 3
[ 30.133122] usb 3-2: configuration #1 chosen from 1 choice
[ 30.351772] hdc: LITE-ON DVD SOHD-167T, ATAPI CD/DVD-ROM drive
[ 30.555115] usb 3-7: new high speed USB device using ehci_hcd and address 5
[ 30.702359] usb 3-7: configuration #1 chosen from 1 choice
[ 30.704053] usbcore: registered new interface driver libusual
[ 30.708197] Initializing USB Mass Storage driver...
[ 31.002600] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 31.134868] hdd: _NEC DVD_RW ND-3530A, ATAPI CD/DVD-ROM drive
[ 31.190397] hdc: selected mode 0x42
[ 31.190495] hdd: selected mode 0x42
[ 31.190686] ide1 at 0x170-0x177,0x376 on irq 15
[ 31.193218] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 31.193971] eth0: RealTek RTL8139 at 0xe098a400, 00:11:09:19:34:cf, IRQ 16
[ 31.193974] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 31.195379] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 31.195730] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 31.249384] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ff3fd800-ff3fdfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 31.268012] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 31.268019] Uniform CD-ROM driver Revision: 3.20
[ 31.269204] usb 1-1: configuration #1 chosen from 1 choice
[ 31.270649] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 31.573938] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 31.785585] usb 2-2: configuration #1 chosen from 1 choice
[ 31.787765] scsi4 : SCSI emulation for USB Mass Storage devices
[ 31.787799] usb-storage: device found at 3
[ 31.787800] usb-storage: waiting for device to settle before scanning
[ 31.787832] scsi5 : SCSI emulation for USB Mass Storage devices
[ 31.787858] usb-storage: device found at 5
[ 31.787860] usb-storage: waiting for device to settle before scanning
[ 31.787906] scsi6 : SCSI emulation for USB Mass Storage devices
[ 31.787932] usb-storage: device found at 3
[ 31.787934] usb-storage: waiting for device to settle before scanning
[ 31.787953] usbcore: registered new interface driver usb-storage
[ 31.787955] USB Mass Storage support registered.
[ 31.798879] usbcore: registered new interface driver hiddev
[ 31.810768] input: Logitech USB Receiver as /class/input/input1
[ 31.810781] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:13.1-2
[ 31.820718] input: Logitech USB Receiver as /class/input/input2
[ 31.820824] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2
[ 31.820833] usbcore: registered new interface driver usbhid
[ 31.820836] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 32.524943] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0000955c40]
[ 35.973430] kjournald starting. Commit interval 5 seconds
[ 35.973443] EXT3-fs: recovery complete.
[ 35.986707] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.780232] usb-storage: device scan complete
[ 36.780251] usb-storage: device scan complete
[ 36.780464] usb-storage: device scan complete
[ 36.784346] scsi 5:0:0:0: Direct-Access GENERIC USB Storage-SMC I19A PQ: 0 ANSI: 0 CCS
[ 36.786422] scsi 6:0:0:0: Direct-Access HP 1.00 PQ: 0 ANSI: 2
[ 36.786714] scsi 4:0:0:0: CD-ROM IOMEGA CDRW86522EXT3-B QOP3 PQ: 0 ANSI: 0
[ 36.788455] scsi 5:0:0:1: Direct-Access GENERIC USB Storage-CFC I19A PQ: 0 ANSI: 0 CCS
[ 36.792463] scsi 5:0:0:2: Direct-Access GENERIC USB Storage-MMC I19A PQ: 0 ANSI: 0 CCS
[ 36.796569] scsi 5:0:0:3: Direct-Access GENERIC USB Storage-MSC I19A PQ: 0 ANSI: 0 CCS
[ 36.797843] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[ 36.797876] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 36.798833] sd 5:0:0:1: [sdc] Attached SCSI removable disk
[ 36.798857] sd 5:0:0:1: Attached scsi generic sg2 type 0
[ 36.799834] sd 5:0:0:2: [sdd] Attached SCSI removable disk
[ 36.799857] sd 5:0:0:2: Attached scsi generic sg3 type 0
[ 36.801082] sd 5:0:0:3: [sde] Attached SCSI removable disk
[ 36.801105] sd 5:0:0:3: Attached scsi generic sg4 type 0
[ 36.801166] scsi 4:0:0:0: Attached scsi generic sg5 type 5
[ 36.809408] sd 6:0:0:0: [sdf] Attached SCSI removable disk
[ 36.809432] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 42.383207] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.405834] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.421059] Linux agpgart interface v0.102 (c) Dave Jones
[ 42.816484] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 43.431676] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B11
[ 43.431696] usbcore: registered new interface driver usblp
[ 43.431699] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 43.638127] Linux video capture interface: v2.00
[ 44.070016] input: PC Speaker as /class/input/input3
[ 44.086834] parport_pc 00:08: reported by Plug and Play ACPI
[ 44.086872] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 44.206845] sr0: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray
[ 44.206912] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 44.260666] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 44.260733] ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 44.260743] saa7133[0]: found at 0000:02:01.0, rev: 240, irq: 21, latency: 64, mmio: 0xff3fe800
[ 44.260751] saa7133[0]: subsystem: 1043:4845, board: ASUS TV-FM 7135 [card=53,autodetected]
[ 44.260760] saa7133[0]: board init: gpio is 0
[ 44.395164] saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 44.395172] saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 44.395178] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 04 08 ff 00 89 ff ff ff ff
[ 44.395184] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 44.395190] saa7133[0]: i2c eeprom 40: ff 14 00 c2 96 ff 01 30 ff ff ff ff ff ff ff ff
[ 44.395196] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 44.395202] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 44.395208] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 44.607022] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 44.654849] tuner 1-004b: setting tuner address to 61
[ 44.694802] tuner 1-004b: type set to tda8290+75
[ 46.336907] tuner 1-004b: setting tuner address to 61
[ 46.376861] tuner 1-004b: type set to tda8290+75
[ 47.973519] saa7133[0]: registered device video0 [v4l2]
[ 47.973626] saa7133[0]: registered device vbi0
[ 47.973729] saa7133[0]: registered device radio0
[ 48.035045] ACPI: PCI Interrupt 0000:00:14.5 -> GSI 17 (level, low) -> IRQ 22
[ 48.090128] saa7134 ALSA driver for DMA sound loaded
[ 48.090153] saa7133[0]/alsa: saa7133[0] at 0xff3fe800 irq 21 registered as card -2
[ 48.830480] lp0: using parport0 (interrupt-driven).
[ 48.897186] Adding 1510068k swap on /dev/sda5. Priority:-1 extents:1 across:1510068k
[ 49.163684] EXT3 FS on sda1, internal journal
[ 49.934925] No dock devices found.
[ 49.961036] ACPI: \_SB_.PCI0.IDEC.SECD.S_D0: found ejectable bay
[ 49.961042] ACPI: \_SB_.PCI0.IDEC.SECD.S_D0: Adding notify handler
[ 49.961070] ACPI: Bay [\_SB_.PCI0.IDEC.SECD.S_D0] Added
[ 49.961075] ACPI: \_SB_.PCI0.IDEC.SECD.S_D1: found ejectable bay
[ 49.961078] ACPI: \_SB_.PCI0.IDEC.SECD.S_D1: Adding notify handler
[ 49.961089] ACPI: Bay [\_SB_.PCI0.IDEC.SECD.S_D1] Added
[ 50.055512] input: Power Button (FF) as /class/input/input4
[ 50.059288] ACPI: Power Button (FF) [PWRF]
[ 50.090441] input: Power Button (CM) as /class/input/input5
[ 50.094225] ACPI: Power Button (CM) [PWRB]
[ 50.279682] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
[ 50.279720] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6
[ 50.279722] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8
[ 50.279725] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
[ 51.250670] ppdev: user-space parallel port driver
[ 51.421264] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 51.425117] serial8250: too much work for irq16
[ 51.431612] serial8250: too much work for irq16
[ 51.442012] serial8250: too much work for irq16
[ 51.449775] serial8250: too much work for irq16
[ 51.460173] serial8250: too much work for irq16
[ 51.469687] serial8250: too much work for irq16
[ 51.491762] serial8250: too much work for irq16
[ 51.544691] audit(1195661225.443:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4955 profile="/usr/sbin/cupsd"
[ 51.550182] serial8250: too much work for irq16
[ 51.554923] serial8250: too much work for irq16
[ 51.568356] serial8250: too much work for irq16
[ 51.577867] serial8250: too much work for irq16
[ 51.588283] serial8250: too much work for irq16
[ 51.600168] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 51.600173] apm: overridden by ACPI.
[ 51.825762] Failure registering capabilities with primary security module.
[ 52.137597] Bluetooth: Core ver 2.11
[ 52.137711] NET: Registered protocol family 31
[ 52.137713] Bluetooth: HCI device and connection manager initialized
[ 52.137717] Bluetooth: HCI socket layer initialized
[ 52.168941] Bluetooth: L2CAP ver 2.8
[ 52.168945] Bluetooth: L2CAP socket layer initialized
[ 52.257912] Bluetooth: RFCOMM socket layer initialized
[ 52.258007] Bluetooth: RFCOMM TTY layer initialized
[ 52.258010] Bluetooth: RFCOMM ver 1.8
[ 31.904000] Marking TSC unstable due to: cpufreq changes.
[ 31.908000] Time: acpi_pm clocksource has been installed.
[ 32.212000] Clocksource tsc unstable (delta = -155996141 ns)
[ 33.228000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 33.236000] [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[ 33.236000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[ 33.544000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 23
[ 35.476000] NET: Registered protocol family 17
[ 38.052000] [fglrx] total GART = 130023424
[ 38.052000] [fglrx] free GART = 114032640
[ 38.052000] [fglrx] max single GART = 114032640
[ 38.052000] [fglrx] total LFB = 33423360
[ 38.052000] [fglrx] free LFB = 15593472
[ 38.052000] [fglrx] max single LFB = 15593472
[ 38.052000] [fglrx] total Inv = 0
[ 38.052000] [fglrx] free Inv = 0
[ 38.052000] [fglrx] max single Inv = 0
[ 38.052000] [fglrx] total TIM = 0
[ 41.008000] NET: Registered protocol family 10
[ 41.012000] lo: Disabled Privacy Extensions
[ 51.448000] eth0: no IPv6 routers present
[ 199.568000] usb 3-6: new high speed USB device using ehci_hcd and address 6
[ 199.700000] usb 3-6: configuration #1 chosen from 2 choices
[ 199.704000] scsi7 : SCSI emulation for USB Mass Storage devices
[ 199.704000] usb-storage: device found at 6
[ 199.704000] usb-storage: waiting for device to settle before scanning
[ 204.704000] usb-storage: device scan complete
[ 204.708000] scsi 7:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 204.728000] sd 7:0:0:0: [sdg] Spinning up disk....ready
[ 214.020000] sd 7:0:0:0: [sdg] 39023511 4096-byte hardware sectors (159840 MB)
[ 214.020000] sd 7:0:0:0: [sdg] Write Protect is off
[ 214.020000] sd 7:0:0:0: [sdg] Mode Sense: 68 00 00 08
[ 214.020000] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 214.020000] sd 7:0:0:0: [sdg] 39023511 4096-byte hardware sectors (159840 MB)
[ 214.020000] sd 7:0:0:0: [sdg] Write Protect is off
[ 214.020000] sd 7:0:0:0: [sdg] Mode Sense: 68 00 00 08
[ 214.020000] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 214.020000] sdg: sdg1
[ 214.228000] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[ 214.228000] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 228.724000] usb 3-6: USB disconnect, address 6
[ 232.364000] usb 3-6: new high speed USB device using ehci_hcd and address 7
[ 232.496000] usb 3-6: configuration #1 chosen from 2 choices
[ 232.504000] scsi8 : SCSI emulation for USB Mass Storage devices
[ 232.504000] usb-storage: device found at 7
[ 232.504000] usb-storage: waiting for device to settle before scanning
[ 237.516000] usb-storage: device scan complete
[ 237.524000] scsi 8:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[ 237.576000] sd 8:0:0:0: [sdg] Spinning up disk....................ready
[ 307.300000] sd 8:0:0:0: [sdg] 39023511 4096-byte hardware sectors (159840 MB)
[ 307.300000] sd 8:0:0:0: [sdg] Write Protect is off
[ 307.300000] sd 8:0:0:0: [sdg] Mode Sense: 68 00 00 08
[ 307.300000] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[ 307.300000] sd 8:0:0:0: [sdg] 39023511 4096-byte hardware sectors (159840 MB)
[ 307.304000] sd 8:0:0:0: [sdg] Write Protect is off
[ 307.304000] sd 8:0:0:0: [sdg] Mode Sense: 68 00 00 08
[ 307.304000] sd 8:0:0:0: [sdg] Assuming drive cache: write through
[ 307.304000] sdg: sdg1
[ 307.480000] sd 8:0:0:0: [sdg] Attached SCSI removable disk
[ 307.480000] sd 8:0:0:0: Attached scsi generic sg7 type 0
[ 746.568000] usb 3-6: USB disconnect, address 7
[26817.564000] usb 3-5: new high speed USB device using ehci_hcd and address 8
[26817.696000] usb 3-5: configuration #1 chosen from 2 choices
[26817.700000] scsi9 : SCSI emulation for USB Mass Storage devices
[26817.700000] usb-storage: device found at 8
[26817.700000] usb-storage: waiting for device to settle before scanning
[26822.700000] usb-storage: device scan complete
[26822.704000] scsi 9:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0
[26822.724000] sd 9:0:0:0: [sdg] Spinning up disk....ready
[26831.920000] sd 9:0:0:0: [sdg] 39023511 4096-byte hardware sectors (159840 MB)
[26831.920000] sd 9:0:0:0: [sdg] Write Protect is off
[26831.920000] sd 9:0:0:0: [sdg] Mode Sense: 68 00 00 08
[26831.920000] sd 9:0:0:0: [sdg] Assuming drive cache: write through
[26831.920000] sd 9:0:0:0: [sdg] 39023511 4096-byte hardware sectors (159840 MB)
[26831.924000] sd 9:0:0:0: [sdg] Write Protect is off
[26831.924000] sd 9:0:0:0: [sdg] Mode Sense: 68 00 00 08
[26831.924000] sd 9:0:0:0: [sdg] Assuming drive cache: write through
[26831.924000] sdg: sdg1
[26832.096000] sd 9:0:0:0: [sdg] Attached SCSI removable disk
[26832.096000] sd 9:0:0:0: Attached scsi generic sg7 type 0
john@john-desktop:~$
