Het gaat hier om mijn 2e HDD, ubuntu staat op de 1e en ik kan dus ook ubuntu opstarten van de 1e HDD en dat commando uitvoeren.
Dit is dan de output, hopelijk kan iemand er wat mee...
Het gedeelte dat over scsi/Sata gaat en dus waarschijnlijk over de betreffende schijf heb ik rood gemaakt.
=====================================================
[17179569.184000] Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.
2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 200
6 (Ubuntu 2.6.17-10.33-386)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[17179569.184000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[17179569.184000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[17179569.184000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[17179569.184000] 1151MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 524208
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 294832 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM ) @ 0x0
00f9a20
[17179569.184000] ACPI: RSDT (v001 A M I OEMRSDT 0x06000609 MSFT 0x00000097) @
0x7ffb0000
[17179569.184000] ACPI: FADT (v002 A M I OEMFACP 0x06000609 MSFT 0x00000097) @
0x7ffb0200
[17179569.184000] ACPI: MADT (v001 A M I OEMAPIC 0x06000609 MSFT 0x00000097) @
0x7ffb0390
[17179569.184000] ACPI: MCFG (v001 A M I OEMMCFG 0x06000609 MSFT 0x00000097) @
0x7ffb0400
[17179569.184000] ACPI: OEMB (v001 A M I AMI_OEM 0x06000609 MSFT 0x00000097) @
0x7ffc0040
[17179569.184000] ACPI: DSDT (v001 939M2 939M2213 0x00000213 INTL 0x02002026) @
0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:11 APIC version 16
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:11 APIC version 16
[17179569.184000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24])
[17179569.184000] IOAPIC[1]: apic_id 3, version 17, address 0xfec10000, GSI 24-3
9
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 2 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 88000000 (gap: 80000000:7
f7c0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=UUID=f39543d4-6a13-4827-ae31-b49ed4b
75f45 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] mapped IOAPIC to ffffb000 (fec10000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2200.384 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.876000] Dentry cache hash table entries: 131072 (order: 7, 524288 byte
s)
[17179569.876000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.916000] Memory: 2068240k/2096832k available (1829k kernel code, 27360k
reserved, 1038k data, 288k init, 1179328k highmem)
[17179569.916000] Checking if this processor honours the WP bit even in supervis
or mode... Ok.
[17179569.996000] Calibrating delay using timer specific routine.. 4404.20 BogoM
IPS (lpj=8808401)
[17179569.996000] Security Framework v1.0.0 initialized
[17179569.996000] SELinux: Disabled at boot.
[17179569.996000] Mount-cache hash table entries: 512
[17179569.996000] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000
00000000 00000001 00000000 00000003
[17179569.996000] CPU: After vendor identify, caps: 178bfbff e3d3fbff 00000000 0
0000000 00000001 00000000 00000003
[17179569.996000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/li
ne)
[17179569.996000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.996000] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 0000041
0 00000001 00000000 00000003
[17179569.996000] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 0
1
[17179569.996000] Checking 'hlt' instruction... OK.
[17179570.012000] SMP alternatives: switching to UP code
[17179570.012000] Freeing SMP alternatives: 0k freed
[17179570.012000] checking if image is initramfs... it is
[17179570.496000] Freeing initrd memory: 6588k freed
[17179570.496000] ACPI: Core revision 20060707
[17179570.496000] ACPI: Looking for DSDT ... not found!
[17179570.496000] ENABLING IO-APIC IRQs
[17179570.496000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.640000] NET: Registered protocol family 16
[17179570.640000] EISA bus registered
[17179570.640000] ACPI: bus type pci registered
[17179570.640000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[17179570.640000] PCI: Not using MMCONFIG.
[17179570.640000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[17179570.640000] PCI: Using configuration type 1
[17179570.640000] Setting up standard PCI resources
[17179571.148000] ACPI: Interpreter enabled
[17179571.148000] ACPI: Using IOAPIC for interrupt routing
[17179571.148000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.148000] PCI: Probing PCI hardware (bus 00)
[17179571.148000] PCI quirk: region 0800-083f claimed by ali7101 ACPI
[17179571.148000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:12.0
[17179571.148000] Boot video device is 0000:01:00.0
[17179571.148000] PCI: Transparent bridge - 0000:00:06.0
[17179571.148000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.160000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179571.160000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT]
[17179571.164000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
[17179571.168000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
[17179571.168000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
[17179571.168000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *1
5), disabled.
[17179571.168000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 1
5)
[17179571.168000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 1
5)
[17179571.168000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 1
5)
[17179571.168000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 1
5)
[17179571.168000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 1
5)
[17179571.168000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 1
5)
[17179571.168000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15
) *9
[17179571.168000] ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 1
5)
[17179571.168000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.168000] pnp: PnP ACPI init
[17179571.172000] pnp: PnP ACPI: found 15 devices
[17179571.172000] PnPBIOS: Disabled by ACPI PNP
[17179571.172000] PCI: Using ACPI for IRQ routing
[17179571.172000] PCI: If a device doesn't work, try "pci=routeirq". If it help
s, post a report
[17179571.180000] pnp: 00:0d: ioport range 0x290-0x29f has been reserved
[17179571.180000] PCI: Bridge: 0000:00:01.0
[17179571.180000] IO window: disabled.
[17179571.180000] MEM window: fa600000-fe6fffff
[17179571.180000] PREFETCH window: b7f00000-d7efffff
[17179571.180000] PCI: Bridge: 0000:00:02.0
[17179571.180000] IO window: disabled.
[17179571.180000] MEM window: fe700000-fe7fffff
[17179571.180000] PREFETCH window: disabled.
[17179571.180000] PCI: Bridge: 0000:00:03.0
[17179571.180000] IO window: d000-dfff
[17179571.180000] MEM window: fe800000-fe8fffff
[17179571.180000] PREFETCH window: disabled.
[17179571.180000] PCI: Bridge: 0000:00:05.0
[17179571.180000] IO window: disabled.
[17179571.180000] MEM window: fe900000-fe9fffff
[17179571.180000] PREFETCH window: disabled.
[17179571.180000] PCI: Bridge: 0000:00:06.0
[17179571.180000] IO window: disabled.
[17179571.180000] MEM window: fea00000-feafffff
[17179571.180000] PREFETCH window: disabled.
[17179571.180000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[17179571.180000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.180000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[17179571.180000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179571.180000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) ->
IRQ 185
[17179571.180000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179571.180000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179571.180000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179571.180000] NET: Registered protocol family 2
[17179571.212000] IP route cache hash table entries: 32768 (order: 5, 131072 byt
es)
[17179571.212000] TCP established hash table entries: 262144 (order: 8, 1048576
bytes)
[17179571.212000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.212000] TCP: Hash tables configured (established 262144 bind 65536)
[17179571.212000] TCP reno registered
[17179571.212000] audit: initializing netlink socket (disabled)
[17179571.212000] audit(1162765567.212:1): initialized
[17179571.212000] highmem bounce pool size: 64 pages
[17179571.212000] VFS: Disk quotas dquot_6.5.1
[17179571.212000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.212000] Initializing Cryptographic API
[17179571.212000] io scheduler noop registered
[17179571.212000] io scheduler anticipatory registered
[17179571.212000] io scheduler deadline registered
[17179571.212000] io scheduler cfq registered (default)
[17179571.212000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 29 (level, low) ->
IRQ 169
[17179571.212000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.212000] assign_interrupt_mode Found MSI capability
[17179571.212000] Allocate Port Service[0000:00:01.0:pcie00]
[17179571.212000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 34 (level, low) ->
IRQ 177
[17179571.212000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179571.212000] assign_interrupt_mode Found MSI capability
[17179571.212000] Allocate Port Service[0000:00:02.0:pcie00]
[17179571.212000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 39 (level, low) ->
IRQ 185
[17179571.212000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[17179571.212000] assign_interrupt_mode Found MSI capability
[17179571.212000] Allocate Port Service[0000:00:03.0:pcie00]
[17179571.212000] isapnp: Scanning for PnP cards...
[17179571.568000] isapnp: No Plug & Play device found
[17179571.580000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ shari
ng enabled
[17179571.580000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.580000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.580000] mice: PS/2 mouse device common for all mice
[17179571.580000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 b
locksize
[17179571.580000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.580000] ide: Assuming 33MHz system bus speed for PIO modes; override w
ith idebus=xx
[17179571.584000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
irq 1,12
[17179571.584000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.584000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.584000] EISA: Probing bus 0 at eisa.0
[17179571.584000] EISA: Detected 0 cards.
[17179571.584000] TCP bic registered
[17179571.584000] NET: Registered protocol family 1
[17179571.584000] NET: Registered protocol family 8
[17179571.584000] NET: Registered protocol family 20
[17179571.584000] Using IPI Shortcut mode
[17179571.584000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.584000] Freeing unused kernel memory: 288k freed
[17179571.612000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.752000] Capability LSM initialized
[17179572.780000] ACPI: Getting cpuindex for acpiid 0x2
[17179573.096000] ALI15X3: IDE controller at PCI slot 0000:00:12.0
[17179573.096000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 19 (level, low) ->
IRQ 225
[17179573.096000] ALI15X3: chipset revision 199
[17179573.096000] ALI15X3: not 100% native mode: will probe irqs later
[17179573.096000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb
:pio
[17179573.096000] ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd
:DMA
[17179573.096000] Probing IDE interface ide0...
[17179573.384000] hda: Maxtor 6Y080L0, ATA DISK drive
[17179574.056000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.056000] Probing IDE interface ide1...
[17179574.792000] hdc: CD-ROM 52X/AKH, ATAPI CD/DVD-ROM drive
[17179575.576000] hdd: HL-DT-STDVDRRW GSA-4166B, ATAPI CD/DVD-ROM drive
[17179575.632000] ide1 at 0x170-0x177,0x376 on irq 15
[17179575.636000] hda: max request size: 128KiB
[17179575.644000] hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/1
6/63, UDMA(133)
[17179575.648000] hda: cache flushes supported
[17179575.648000] hda: hda1 hda2 < hda5 >
[17179575.684000] hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA
[17179575.684000] Uniform CD-ROM driver Revision: 3.20
[17179575.692000] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache,
UDMA(33)
[17179594.172000] SCSI subsystem initialized
[17179594.172000] libata version 1.20 loaded.
[17179594.176000] ahci 0000:03:00.0: version 1.2
[17179594.176000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 35 (level, low) ->
IRQ 233
[17179595.196000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179595.196000] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1
impl SATA mode
[17179595.196000] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum pa
rt
[17179595.196000] ata1: SATA max UDMA/133 cmd 0xF8858100 ctl 0x0 bmdma 0x0 irq 2
33
[17179595.572000] ata1: SATA link up 3.0 Gbps (SStatus 123)
[17179595.572000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4773 85:7c68 86:3e0
1 87:4763 88:407f
[17179595.572000] ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48
[17179595.572000] ata1: dev 0 configured for UDMA/133
[17179595.572000] scsi0 : ahci
[17179595.572000] Vendor: ATA Model: Maxtor 7V250F0 Rev: VA11
[17179595.572000] Type: Direct-Access ANSI SCSI revisio
n: 05
[17179595.580000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[17179595.580000] sda: Write Protect is off
[17179595.580000] sda: Mode Sense: 00 3a 00 00
[17179595.580000] SCSI device sda: drive cache: write back
[17179595.580000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[17179595.580000] sda: Write Protect is off
[17179595.580000] sda: Mode Sense: 00 3a 00 00
[17179595.580000] SCSI device sda: drive cache: write back
[17179595.580000] sda: sda1
[17179595.604000] sd 0:0:0:0: Attached scsi disk sda[/b]
[17179595.772000] usbcore: registered new driver usbfs
[17179595.772000] usbcore: registered new driver hub
[17179595.772000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[17179595.776000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) ->
IRQ 50
[17179595.776000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[17179595.776000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus nu
mber 1
[17179595.776000] ohci_hcd 0000:00:13.0: irq 50, io mem 0xfebfd000
[17179595.832000] usb usb1: configuration #1 chosen from 1 choice
[17179595.832000] hub 1-0:1.0: USB hub found
[17179595.832000] hub 1-0:1.0: 3 ports detected
[17179595.936000] ACPI: PCI Interrupt 0000:00:13.1 -> GSI 21 (level, low) ->
IRQ 58
[17179595.936000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[17179595.936000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus nu
mber 2
[17179595.936000] ohci_hcd 0000:00:13.1: irq 58, io mem 0xfebfc000
[17179595.992000] usb usb2: configuration #1 chosen from 1 choice
[17179595.992000] hub 2-0:1.0: USB hub found
[17179595.992000] hub 2-0:1.0: 3 ports detected
[17179596.096000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) ->
IRQ 66
[17179596.096000] ohci_hcd 0000:00:13.2: OHCI Host Controller
[17179596.096000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus nu
mber 3
[17179596.096000] ohci_hcd 0000:00:13.2: irq 66, io mem 0xfebfb000
[17179596.152000] usb usb3: configuration #1 chosen from 1 choice
[17179596.152000] hub 3-0:1.0: USB hub found
[17179596.152000] hub 3-0:1.0: 3 ports detected
[17179596.256000] ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) ->
IRQ 74
[17179596.256000] ehci_hcd 0000:00:13.3: EHCI Host Controller
[17179596.256000] ehci_hcd 0000:00:13.3: new USB bus registered, assigned bus nu
mber 4
[17179596.256000] ehci_hcd 0000:00:13.3: debug port 1
[17179596.280000] ehci_hcd 0000:00:13.3: irq 74, io mem 0xfebfe800
[17179596.280000] ehci_hcd 0000:00:13.3: USB 2.0 started, EHCI 1.00, driver 10 D
ec 2004
[17179596.280000] usb usb4: configuration #1 chosen from 1 choice
[17179596.280000] hub 4-0:1.0: USB hub found
[17179596.280000] hub 4-0:1.0: 8 ports detected
[17179596.460000] kjournald starting. Commit interval 5 seconds
[17179596.460000] EXT3-fs: mounted filesystem with ordered data mode.
[17179607.860000] input: PC Speaker as /class/input/input1
[17179608.084000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179608.088000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179608.416000] ali15x3_smbus 0000:00:07.1: ALI15X3_smb region uninitialized -
upgrade BIOS or use force_addr=0xaddr
[17179608.416000] ali15x3_smbus 0000:00:07.1: ALI15X3 not detected, module not i
nserted.
[17179608.420000] ali1535_smbus 0000:00:07.1: ALI1535_smb region uninitialized -
upgrade BIOS?
[17179608.420000] ali1535_smbus 0000:00:07.1: ALI1535 not detected, module not i
nserted.
[17179608.440000] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[17179608.440000] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) ->
IRQ 82
[17179608.460000] eth0: ULi M5263 at pci0000:00:11.0, 00:13:8f:81:81:0d, irq 82.
[17179608.468000] Linux agpgart interface v0.101 (c) Dave Jones
[17179608.468000] agpgart: Unsupported ALi chipset (device id: 1689)
[17179608.468000] agpgart: Detected AGP bridge 20
[17179608.468000] Setting up ULi AGP.
[17179608.472000] agpgart: AGP aperture is 64M @ 0xdc000000
[17179608.572000] Floppy drive(s): fd0 is 1.44M
[17179608.612000] FDC 0 is a post-1991 82077
[17179608.664000] ali1563: SMBus control = 0403
[17179608.664000] ali1563_probe: Returning 0
[17179608.680000] parport: PnPBIOS parport detected.
[17179608.680000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRIST
ATE,COMPAT,EPP,ECP,DMA]
[17179608.688000] Real Time Clock Driver v1.12ac
[17179608.816000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) ->
IRQ 90
[17179608.956000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179609.028000] nvidia: module license 'NVIDIA' taints kernel.
[17179609.552000] input: ImExPS/2 Logitech MX Mouse as /class/input/input2
[17179609.576000] ts: Compaq touchscreen protocol output
[17179609.832000] AC'97 1 does not respond - RESET
[17179609.832000] AC'97 1 access is not valid [0xffffffff], removing mixer.
[17179609.832000] Unable to initialize codec #1
[17179609.888000] intel8x0_measure_ac97_clock: measured 54959 usecs
[17179609.888000] intel8x0: clocking to 48000
[17179609.888000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 25 (level, low) ->
IRQ 98
[17179609.888000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179609.888000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oc
t 16 21:56:04 PDT 2006
[17179610.256000] lp0: using parport0 (interrupt-driven).
[17179610.332000] Adding 3269188k swap on /dev/disk/by-uuid/b55b556a-bba8-4ca3-a
874-2a80eeedea4e. Priority:-1 extents:1 across:3269188k
[17179610.416000] NET: Registered protocol family 17
[17179610.432000] EXT3 FS on hda1, internal journal
[17179610.592000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179610.592000] md: bitmap version 4.39
[17179610.784000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@
redhat.com
[17179611.812000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179611.812000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179611.812000] ide: failed opcode was: unknown
[17179611.812000] end_request: I/O error, dev hdd, sector 9180288
[17179612.348000] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex
[17179612.540000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179612.540000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179612.540000] ide: failed opcode was: unknown
[17179612.540000] end_request: I/O error, dev hdd, sector 9180412
[17179612.612000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179612.612000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179612.612000] ide: failed opcode was: unknown
[17179612.612000] end_request: I/O error, dev hdd, sector 9180412
[17179612.724000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179612.724000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179612.724000] ide: failed opcode was: unknown
[17179612.724000] end_request: I/O error, dev hdd, sector 9180288
[17179612.724000] Buffer I/O error on device hdd, logical block 1147536
[17179613.016000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179613.016000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179613.016000] ide: failed opcode was: unknown
[17179613.016000] end_request: I/O error, dev hdd, sector 9180412
[17179613.172000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179613.172000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179613.172000] ide: failed opcode was: unknown
[17179613.172000] end_request: I/O error, dev hdd, sector 9180408
[17179613.172000] Buffer I/O error on device hdd, logical block 1147551
[17179613.184000] hdd: command error: status=0x51 { DriveReady SeekComplete Erro
r }
[17179613.184000] hdd: command error: error=0x50 { LastFailedSense=0x05 }
[17179613.184000] ide: failed opcode was: unknown
[17179613.184000] end_request: I/O error, dev hdd, sector 4590208
[17179613.184000] Buffer I/O error on device hdd, logical block 573776
[17179613.460000] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[17179613.460000] SGI XFS Quota Management subsystem
[17179613.488000] XFS mounting filesystem sda1
[17179613.620000] Starting XFS recovery on filesystem: sda1 (logdev: internal)
[17179613.620000] XFS: dirty log written in incompatible format - can't recover
[17179613.620000] XFS: log mount/recovery failed: error 5
[17179613.620000] XFS: log mount failed
[17179619.552000] ACPI: Power Button (FF) [PWRF]
[17179619.552000] ACPI: Power Button (CM) [PWRB]
[17179619.628000] ibm_acpi: ec object not found
[17179619.656000] pcc_acpi: loading...
[17179619.916000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (versi on 1.60.2)
[17179619.916000] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
[17179619.916000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
[17179619.916000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
[17179619.916000] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[17179619.916000] cpu_init done, current fid 0xe, vid 0x8
[17179623.100000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[17179623.100000] apm: overridden by ACPI.
[17179625.828000] NET: Registered protocol family 10
[17179625.828000] lo: Disabled Privacy Extensions
[17179625.828000] IPv6 over IPv4 tunneling driver
[17179628.856000] Bluetooth: Core ver 2.8
[17179628.856000] NET: Registered protocol family 31
[17179628.856000] Bluetooth: HCI device and connection manager initialized
[17179628.856000] Bluetooth: HCI socket layer initialized
[17179628.892000] Bluetooth: L2CAP ver 2.8
[17179628.892000] Bluetooth: L2CAP socket layer initialized
[17179628.992000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1
[17179629.028000] Bluetooth: RFCOMM socket layer initialized
[17179629.028000] Bluetooth: RFCOMM TTY layer initialized
[17179629.028000] Bluetooth: RFCOMM ver 1.7
[17179636.296000] eth0: no IPv6 routers present
======================================================
Daaronder staat ook nog een hele rits met hdd: command error: Wellicht dat die er ook iets mee te maken hebben... De belangrijkste regel die ik uit bovenstaande verhaal haal is: [17179613.620000] XFS: dirty log written in incompatible format - can't recover. Wat ik er echter aan kan doen weet ik dus niet. Iemand suggesties?