Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Upgrade van 8.04->8.10->9.04 start loopt vast  (gelezen 868 keer)

Upgrade van 8.04->8.10->9.04 start loopt vast
« Gepost op: 2009/06/23, 12:49:11 »
Vorige week heb ik mijn 2e desktop geüpgraded van 8.04 -> 8.10 –> 9.04 nadat de update van de andere desktop succesvol was verlopen.
Na de upgraden startte de pc normaal: Ubuntu logo en de tijdbalk, vervolgens een gebruikelijke lichtbruin scherm met zandloper MAAR een paar seconde later gaat het lichtbruine scherm over in een wit-grijzig scherm met een witte onbeweeglijke zandloper. De pc is vastgelopen.

Ik heb de recoverymode gestart en ik heb het volgende gedaan [ met de uitvoer van de acties:

repair broken packages Check package

Rm: cannot remove  /var/lib/apt/lists/partial/*”: no such file or directory rm cannot remove '/var/cache/apt/archives/partil/*'No such file or directory

reading cache
reading package lists: done
reading system information: done [3x]
Do you want to start the upgrade
1 new package is going to be installed

you have to download a tota pf 22.3 k this download will take about enz.

continue [yN] detals [d]
d=> install ash
(END)

loopt vast

vervolgens nogmaals de recovery mode gestart en een filecheck gedaan. Het levert niets op. Na terug te gaan naar het startproces loop de zaak op dezelfde manier vast.
Mijn vraag: Wie herkent dit  en wat moet ik doen? een keer

Ik ben niet erg bedreven met Linux. ???javascript:void(0)

Re: Upgrade van 8.04->8.10->9.04 start loopt vast
« Reactie #1 Gepost op: 2009/06/24, 11:51:01 »
ik weet het niet zeker, maar misschien is er iets fout in je xorg.conf (wit-grijs scherm)
start weer eens op in de recovery mode en kies daar de optie 'try to fix xserver'
It ain't me, it ain't me, I ain't no fortunate one, no.

Re: Upgrade van 8.04->8.10->9.04 start loopt vast
« Reactie #2 Gepost op: 2009/06/24, 21:21:18 »
Ik heb het geprobeerd, maar zonder resultaat. Ik zal morgen de menu.lst in mijn bericht plaatsen

Re: Upgrade van 8.04->8.10->9.04 start loopt vast
« Reactie #3 Gepost op: 2009/06/26, 21:35:09 »
Zoals ik beloofd heb, hier dan mijn menu.lst. Ziet iemand hier iets aan, wat het niet goed eindigen van het boot-proces kan verklaren [ Wel Ubuntu logo en balk , maar vrijwel direct na het lichtgrijze scherm met zandlopen, wordt schrerm grijswit en loopt vast

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=808251a7-a1b9-4a5e-9e52-e0a4c3fc352f ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,7)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 8.10, kernel 2.6.27-14-generic
root      (hd0,7)
kernel      /boot/vmlinuz-2.6.27-14-generic root=UUID=808251a7-a1b9-4a5e-9e52-e0a4c3fc352f ro quiet splash
initrd      /boot/initrd.img-2.6.27-14-generic
quiet

title      Ubuntu 8.10, kernel 2.6.27-14-generic (recovery mode)
root      (hd0,7)
kernel      /boot/vmlinuz-2.6.27-14-generic root=UUID=808251a7-a1b9-4a5e-9e52-e0a4c3fc352f ro  single
initrd      /boot/initrd.img-2.6.27-14-generic

title      Ubuntu 8.10, kernel 2.6.24-24-generic
root      (hd0,7)
kernel      /boot/vmlinuz-2.6.24-24-generic root=UUID=808251a7-a1b9-4a5e-9e52-e0a4c3fc352f ro quiet splash
initrd      /boot/initrd.img-2.6.24-24-generic
quiet

title      Ubuntu 8.10, kernel 2.6.24-24-generic (recovery mode)
root      (hd0,7)
kernel      /boot/vmlinuz-2.6.24-24-generic root=UUID=808251a7-a1b9-4a5e-9e52-e0a4c3fc352f ro  single
initrd      /boot/initrd.img-2.6.24-24-generic

title      Ubuntu 8.10, memtest86+
root      (hd0,7)
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title      Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title      Microsoft Windows XP Professional
root      (hd0,0)
savedefault
makeactive
chainloader   +1

Re: Upgrade van 8.04->8.10->9.04 start loopt vast
« Reactie #4 Gepost op: 2009/06/28, 18:56:15 »
Omdat ik te weinig reacties kreeg op mijn bericht, heb ik Ubuntu 9.04 maar vanaf Live-CD geherinstalleerd. Het loopt fantastisch. Ik wil dit bericht afsluiten