De manual van jouw laptop (Aspire 5334) is via Google te vinden. Met een beetje knippen en plakken kom je op:
To activate the BIOS Utility, press F2 during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press F2 to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
There are five menu options: Information, Main, Security, Boot, and Exit.
Follow these instructions:
• To choose a menu, use the left and right arrow keys.
• To choose an item, use the up and down arrow keys.
• To change the value of a parameter, press F5 or F6.
• Press Esc while you are in any of the menu options to go to the Exit menu.
•
In any menu, you can load default settings by pressing F9. You can also press F10 to save any
changes made and exit the BIOS Setup Utility.
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
Boot
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices
includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.
Select Boot Devices to select specific devices to support boot.
Dus met F2 het BIOS in en bootmenu menu activeren. Bij mijn desktop heb ik ook al de USB stick erin zodat in de BIOS al de schijfnaam vermeld wordt waarvan ik wil opstarten. Zou moeten lukken zo zeker met de verwijzing naar unetbootin.
Veel succes