Na het installeren van smartmontools, krijg ik de volgende output:
vistausss@vistausss-compaq:~$ sudo smartctl -a /dev/sda
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM250JI
Serial Number: S15YJD0P992586
Firmware Version: HS100-10
User Capacity: 250.059.350.016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sun Nov 1 14:15:53 2009 CET
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 102) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 102) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 2029
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 2625
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2704
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 9
7 Seek_Error_Rate 0x000f 252 252 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 252 252 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 6034
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 1
11 Calibration_Retry_Count 0x0032 081 081 000 Old_age Always - 20035
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1448
184 Unknown_Attribute 0x0033 252 252 070 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 095 095 000 Old_age Always - 5973
188 Unknown_Attribute 0x0032 252 252 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 037 040 Old_age Always In_the_past 43 (Lifetime Min/Max 14/63)
191 G-Sense_Error_Rate 0x0032 096 096 000 Old_age Always - 42911
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 191
193 Load_Cycle_Count 0x0032 069 069 000 Old_age Always - 317655
194 Temperature_Celsius 0x0022 057 037 000 Old_age Always - 43 (Lifetime Min/Max 14/63)
195 Hardware_ECC_Recovered 0x001a 100 001 000 Old_age Always - 24733
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 095 095 000 Old_age Always - 49
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 2979 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2979 occurred at disk power-on lifetime: 6007 hours (250 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 a0 8c f7 ef Error: AMNF 8 sectors at LBA = 0x0ff78ca0 = 267881632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 8c f7 ef 00 01:28:01.187 READ DMA
ec 00 00 00 00 00 a0 00 01:27:58.187 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:27:58.187 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 01:27:58.187 IDENTIFY DEVICE
Error 2978 occurred at disk power-on lifetime: 6007 hours (250 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 8c f7 ef Error: UNC 8 sectors at LBA = 0x0ff78ca0 = 267881632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 8c f7 ef 00 01:27:58.062 READ DMA
ec 00 00 00 00 00 a0 00 01:27:56.812 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:27:56.812 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 01:27:56.812 IDENTIFY DEVICE
Error 2977 occurred at disk power-on lifetime: 6007 hours (250 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 8c f7 ef Error: UNC 8 sectors at LBA = 0x0ff78ca0 = 267881632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 8c f7 ef 00 01:27:56.687 READ DMA
ec 00 00 00 00 00 a0 00 01:27:53.812 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:27:53.812 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 01:27:53.750 IDENTIFY DEVICE
Error 2976 occurred at disk power-on lifetime: 6007 hours (250 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 a0 8c f7 ef Error: UNC 8 sectors at LBA = 0x0ff78ca0 = 267881632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 8c f7 ef 00 01:27:53.687 READ DMA
ec 00 00 00 00 00 a0 00 01:27:52.437 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:27:52.437 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 01:27:52.437 IDENTIFY DEVICE
Error 2975 occurred at disk power-on lifetime: 6007 hours (250 days + 7 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
01 51 08 a0 8c f7 ef Error: AMNF 8 sectors at LBA = 0x0ff78ca0 = 267881632
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 a0 8c f7 ef 00 01:27:39.375 READ DMA
ec 00 00 00 00 00 a0 00 01:27:36.875 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 01:27:36.875 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 01:27:36.875 IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: read failure 00% 6033 229804851
# 2 Short offline Completed: read failure 00% 6033 229807353
# 3 Short offline Aborted by host 150% 227 -
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed_read_failure [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
vistausss@vistausss-compaq:~$