Hoi,
Wie kan mij helpen om een TASCAM U-122L aan de gang te krijgen.
Ik gebruik UBUNTU 9.04
Als ik LSUSB geef in terminal geet deze aan dat de module herkent wordt:
leseric@leseric-desktop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 0644:800e TEAC Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 043d:0091 Lexmark International, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
leseric@leseric-desktop:~$
Ik heb nu JACK geïnstalleerd en deze ingesteld op:
Driver is ALSA
Interface op HW:0 (Dit is de TASCAM U-122L zoals hij dit aangeeft).
Als ik dan JACK wil starten dan krijg ik de melding :
COULD NOT CONNECT TO JACK SERVER AS CLIENT, ZIE LOG FILE.
hieronder de lof file.
20:03:57.921 Patchbay deactivated.
20:03:58.217 Statistics reset.
20:03:58.235 ALSA connection graph change.
20:03:58.529 ALSA connection change.
20:04:19.172 Startup script...
20:04:19.172 artsshell -q terminate
sh: artsshell: not found
20:04:19.575 Startup script terminated with exit status=32512.
20:04:19.575 JACK is starting...
20:04:19.576 /usr/bin/jackd -R -dalsa -dhw:1 -r44100 -p1024 -n3 -i2 -o2
20:04:19.580 JACK was started with PID=4886.
no message buffer overruns
jackd 0.116.1
Copyright 2001-2005 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot use real-time scheduling (FIFO at priority 10) [for thread -1211246912, from thread -1211246912] (1: Operation not permitted)
cannot create engine
20:04:19.621 JACK was stopped successfully.
20:04:19.622 Post-shutdown script...
20:04:19.622 killall jackd
jackd: er is geen proces afgebroken
20:04:20.034 Post-shutdown script terminated with exit status=256.
20:04:21.761 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
Wat moet ik nu doen? Hoe kan ik een JACK server starten op installeren?
Als ik bij SYSTEEM-VOORKEUREN_GELUID kijk dan staat daar nergens een TASCAM of U-122L tussen. Alleen bij de optie Geluid conderentioe opname. Hier kan ik wel een TASCAM selecteren. Maar dat werkt neit.
Wie heeft wat tips.
Groet,
Eric