alles gedaan zoals hierboven, maar bij mij lukt het niet.
~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x03f0, product=0x1016) at libusb:005:002
found USB scanner (vendor=0x05d8, product=0x4003, chip=GT-6816?) at libusb:001:004
found USB scanner (vendor=0x0c45, product=0x6029) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
~$ scanimage -L
device `v4l:/dev/video0' is a Noname BT878 video ( *** UNKNOWN/GENER virtual device
Die laatste is dus mijn webcam en niet mijn scanner.
ook xsane vind enkel de webcam.
iemand een idee?