Wat er is gebeurt weet ik niet maar na het verdelen van meerdere partities op een usb sleutel kan ik de usb ingang niet meer gebruiken, alsook de verschillende partities op de harde schijf ! Ik krijg als foutmelding: "Error creating moint point: No such file or directory"
Dit op een ubuntu 10.04; Ik heb op de laptop nog een oudere versie staan, daar werkt alles perfect en kan ik de verschillende partities lezen en openen. Dit (laatste gedeelte van) bericht krijg ik via dmesg:
[ 20.514225] <==== RTMPInitialize, Status=0
[ 20.514290] 0x1300 = 00073200
[ 20.517343] r8169: eth0: link up
[ 20.517352] r8169: eth0: link up
[ 20.820254] ppdev: user-space parallel port driver
[ 31.010028] eth0: no IPv6 routers present
[ 31.180024] wlan0: no IPv6 routers present
[ 637.950082] usb 1-1: new high speed USB device using ehci_hcd and address 3
[ 638.534793] usb 1-1: configuration #1 chosen from 1 choice
[ 638.627313] Initializing USB Mass Storage driver...
[ 638.628079] scsi6 : SCSI emulation for USB Mass Storage devices
[ 638.628418] usbcore: registered new interface driver usb-storage
[ 638.628425] USB Mass Storage support registered.
[ 638.628709] usb-storage: device found at 3
[ 638.628713] usb-storage: waiting for device to settle before scanning
[ 643.622841] usb-storage: device scan complete
[ 643.717077] scsi 6:0:0:0: Direct-Access Corsair Voyager 3000 PQ: 0 ANSI: 0 CCS
[ 643.718245] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 643.722199] sd 6:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 643.723427] sd 6:0:0:0: [sdb] Write Protect is off
[ 643.723434] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 643.723440] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 643.728472] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 643.728487] sdb: sdb1 sdb2
[ 643.733430] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 643.733441] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1312.870492] usb 1-1: USB disconnect, address 3
[ 1316.720044] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 1317.302592] usb 1-1: configuration #1 chosen from 1 choice
[ 1317.303082] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1317.303410] usb-storage: device found at 4
[ 1317.303414] usb-storage: waiting for device to settle before scanning
[ 1322.300346] usb-storage: device scan complete
[ 1322.395303] scsi 7:0:0:0: Direct-Access Corsair Voyager 3000 PQ: 0 ANSI: 0 CCS
[ 1322.396515] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 1322.399018] sd 7:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1322.400658] sd 7:0:0:0: [sdb] Write Protect is off
[ 1322.400667] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1322.400673] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1322.404406] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1322.404420] sdb: sdb1 sdb2
[ 1322.409633] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1322.409644] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 1344.550673] usb 1-1: USB disconnect, address 4
[ 2253.500076] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 2254.082844] usb 1-1: configuration #1 chosen from 1 choice
[ 2254.084077] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2254.084391] usb-storage: device found at 5
[ 2254.084398] usb-storage: waiting for device to settle before scanning
[ 2259.080359] usb-storage: device scan complete
[ 2259.174682] scsi 8:0:0:0: Direct-Access Corsair Voyager 3000 PQ: 0 ANSI: 0 CCS
[ 2259.175890] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2259.180915] sd 8:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 2259.182047] sd 8:0:0:0: [sdb] Write Protect is off
[ 2259.182056] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2259.182061] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2259.189017] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2259.189029] sdb: sdb1 sdb2
[ 2259.194018] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2259.194029] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 2639.289553] usb 1-1: USB disconnect, address 5
[ 2641.822560] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 2642.426983] usb 1-1: configuration #1 chosen from 1 choice
[ 2642.428305] scsi9 : SCSI emulation for USB Mass Storage devices
[ 2642.428530] usb-storage: device found at 6
[ 2642.428537] usb-storage: waiting for device to settle before scanning
[ 2647.421955] usb-storage: device scan complete
[ 2647.516684] scsi 9:0:0:0: Direct-Access Corsair Voyager 3000 PQ: 0 ANSI: 0 CCS
[ 2647.517842] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 2647.531404] sd 9:0:0:0: [sdb] 31326208 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 2647.533018] sd 9:0:0:0: [sdb] Write Protect is off
[ 2647.533026] sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 2647.533031] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2647.538059] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2647.538071] sdb: sdb1 sdb2
[ 2647.543080] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 2647.543102] sd 9:0:0:0: [sdb] Attached SCSI removable disk
Als dit kan helpen bij het oplossen van het probleem, maar ik ben geen komputer specialist en nog minder van ubuntu en linux in het algemeen.
Dank voor eventuele hulp
