Beste steefjeqv
Heel erg bedankt voor je reactie!!! Ik heb gedaan wat er in de howto staat van
http://www.mythtv.org/wiki/index.php/AVerMedia_M150-DHij kwam precies op het goede moment, het werkt echter nog niet :-( ik krijg nog steeds fouten m.a.w. geen beeld.
Hier nog wat informatie
lsmod geeft:
lsmod |grep cx
cx8800 32268 0
cx88_dvb 10244 0
cx8802 11780 1 cx88_dvb
cx88xx 62368 3 cx8800,cx88_dvb,cx8802
v4l1_compat 14468 1 cx8800
i2c_algo_bit 9608 2 ivtv,cx88xx
v4l2_common 6016 1 cx8800
ir_common 9988 1 cx88xx
btcx_risc 5128 3 cx8800,cx8802,cx88xx
tveeprom 15248 1 cx88xx
mt352 6788 1 cx88_dvb
or51132 10244 1 cx88_dvb
video_buf_dvb 6660 1 cx88_dvb
videodev 9856 3 cx8800,ivtv,cx88xx
video_buf 22148 5 cx8800,cx88_dvb,cx8802,cx88xx,video_buf_dvb
nxt200x 13444 1 cx88_dvb
lgdt330x 8092 1 cx88_dvb
cx22702 6404 1 cx88_dvb
dvb_pll 11012 4 cx88_dvb,or51132,nxt200x,cx22702
i2c_core 21904 16 i2c_acpi_ec,ivtv,asb100,eeprom,tuner,cx88_dvb,cx88xx,i2c_algo_bit,tveeprom,mt352,or51132,nxt200x,lgdt330x,cx22702,nvidia,i2c_nforce2
lspci:
$ lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce Audio Processing Unit (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:04.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
0000:01:08.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
0000:01:08.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
0000:01:08.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
0000:01:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:03:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6200] (rev a2)
:~$ tvtime -v
Running tvtime 1.0.1.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/user/.tvtime/tvtime.xml
cpuinfo: CPU AMD Athlon(tm) XP 2600+, family 6, model 8, stepping 1.
cpuinfo: CPU measured at 2079.690MHz.
tvtime: Cannot set priority to -10: Permission denied.
xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 70000000
xfullscreen: Single-head detected, pixel aspect will be calculated.
xfullscreen: Pixel aspect ratio on the primary head is: 1368/1355 == 1.01.
xfullscreen: Using the XFree86-VidModeExtension to calculate fullscreen size.
xfullscreen: Fullscreen to 0,0 with size 1280x1024.
xcommon: Have XTest, will use it to ping the screensaver.
xcommon: Pixel aspect ratio 1:1.
xcommon: Pixel aspect ratio 1:1.
xcommon: Window manager is Metacity and is EWMH compliant.
xcommon: You are using metacity. Disabling aspect ratio hints
xcommon: since most deployed versions of metacity are still broken.
xcommon: Using EWMH state fullscreen property.
xcommon: Using EWMH state above property.
xcommon: Using EWMH state below property.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xvoutput: Using XVIDEO adaptor 274: NV17 Video Texture.
speedycode: Using MMXEXT optimized functions.
station: Reading stationlist from /home/user/.tvtime/stationlist.xml
videoinput: Using video4linux2 driver 'cx8800', card 'UNKNOWN/GENERIC' (bus PCI:0000:01:08.0).
videoinput: Version is 5, capabilities 5000015.
videoinput: Can't get tuner info: Invalid argument
videoinput: Width 720 too high, using 640 instead as suggested by the driver.
videoinput: Maximum input width: 640 pixels.
videoinput: Can't get tuner info: Invalid argument
tvtime: Sampling input at 640 pixels per scanline.
xcommon: Pixel aspect ratio 1:1.
xcommon: Displaying in a 768x576 window inside 768x576 space.
xcommon: Received a map, marking window as visible (79).
xcommon: Window fully obscured, marking window as hidden (192).
xcommon: Window made visible, marking window as visible (200).
tvtime: Cleaning up.
Thank you for using tvtime.
Als root heb ik ook proberen tvtime op te starten helaas maakt dat niets uit. Ik heb vervolgens gekeken op de site van tvtime en wel hier:
http://tvtime.sourceforge.net/problems.html#undetecteden de zin:
........"If your card appears as UNKNOWN/GENERIC, then the tuner driver will not be loaded and the card will likely not work. You will need to load the driver with the correct card number."........
schijnt aardig overeen te komen met mijn probleem. Nu heb ik geprobeerd de modules te unloaden en weer opnieuw te laden met de optie card=12 (dat de card nummer 12 vermoed ik omdat dat in de
http://www.mythtv.org/wiki/index.php/AVerMedia_M150-D howto staat)maar dit wil echter niet werken ik krijg dan nl de volgende fout:
user@xp2600ubuntu:~$ sudo rmmod cx8800
user@xp2600ubuntu:~$ sudo modprobe cx8800 card=12
FATAL: Error inserting cx8800 (/lib/modules/2.6.15-28-386/kernel/drivers/media/video/cx88/cx8800.ko): Unknown symbol in module, or unknown parameter (see dmesg)
toen heb ik gedaan:
dmesg | grep card
[17324669.792000] cx88_blackbird: Unknown parameter `card'
[17326010.816000] cx8800: Unknown parameter `card'
[17326213.916000] cx8800: Unknown parameter `card'
nu zit ik echter vast want ik weet niet meer hoe ik dit moet aanpakken, heb ook alweer een aantal uren google op zitten dus dan maar weer hier vragen dacht ik...
tevens heb ik het vermoeden dat ik een iets andere versie heb van de kaart aangezien er bij
http://www.mythtv.org/wiki/index.php/AVerMedia_M150-Dzijn dmesg staat
tuner 0-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
tuner 0-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
en volgens mij moet ik als Nederlander PAL-BG hebben
Ik heb trouwens een kaart met composite aansluitingen en de wiki van mythtv niet.
Heeft iemand een idee wat ik hier mee moet? Alvast bedankt!!