Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Beryl hulp...  (gelezen 1046 keer)

MichielArndts

  • Gast
Beryl hulp...
« Gepost op: 2007/04/02, 18:55:44 »
Heb beryl nog niet aant het werken gekregen. Ik ander topic van "hoe beryl starten"  (2de pagina) staat dat je een fout kan zien wanneer je beryl-manager typt in de terminal. Wanneer ik dat doe flikkert mijn beeld een paar x en dan verdwijnen mijn startbalken en alleen mij geopende scherm blijft staan...
Und jetzt??

Offline Soul-Sing

  • Lid
Beryl hulp...
« Reactie #1 Gepost op: 2007/04/02, 19:29:55 »
Citaat van: MichielArndts
Heb beryl nog niet aant het werken gekregen. Ik ander topic van "hoe beryl starten"  (2de pagina) staat dat je een fout kan zien wanneer je beryl-manager typt in de terminal. Wanneer ik dat doe flikkert mijn beeld een paar x en dan verdwijnen mijn startbalken en alleen mij geopende scherm blijft staan...
Und jetzt??
hoi, kun je vertellen hoe ver je bent met het opzetten van beryl?
- heb je de juiste drivers voor je graf. kaart geinstalleerd? en welke kaart heb je overigens?

MichielArndts

  • Gast
Beryl hulp...
« Reactie #2 Gepost op: 2007/04/02, 20:09:10 »
om eerlijk te zijn heb ik geen verstand van Beryl over hoe en wat... Drivers weet ik niet (die van synaptic manager, daar heb ik ook beryl vandaan)
Wanneer ik die diamand in beeld krijg en hem naar beryl zet (ipv metacity) dan flikkerd beeld paar x en is tie weer terug in de metacity. Maar nu had ik update van gedaan v beryl met themes (omdat ik die miste volgens "terminal - beryl manager (dan gaf tie een fout))

Ik heb btw de ATI X700 (en ja weet da t niet de beste is...)

Offline Soul-Sing

  • Lid
Beryl hulp...
« Reactie #3 Gepost op: 2007/04/02, 20:42:27 »
Citaat van: MichielArndts
om eerlijk te zijn heb ik geen verstand van Beryl over hoe en wat... Drivers weet ik niet (die van synaptic manager, daar heb ik ook beryl vandaan)
Wanneer ik die diamand in beeld krijg en hem naar beryl zet (ipv metacity) dan flikkerd beeld paar x en is tie weer terug in de metacity. Maar nu had ik update van gedaan v beryl met themes (omdat ik die miste volgens "terminal - beryl manager (dan gaf tie een fout))

Ik heb btw de ATI X700 (en ja weet da t niet de beste is...)
das jammer ik heb wel wat ervaring met nvidia en beryl.
profox heeft een goede howto geschreven voor beryl en ati-kaarten.
zie: http://forum.ubuntu-nl.org/topic/8638

ik hoop dat je er wat aan hebt!

Offline patrick

  • Lid
Beryl hulp...
« Reactie #4 Gepost op: 2007/04/02, 20:57:43 »
Heb zelf een ati een radeon A9550 met 128Mb ram en ik heb sinds vandaag beryl kunnen opstarten. Ik weet niet juist wat ik allemaal al heb gedaan, maar het werkt en het is echt fantastisch.
Acer desktop met intel E5200 - 4Gb Ram - ATI RADEON HD3450 256Mb - 640Gb HD en 1 van 320 Gb.
Dual boot systeem met Ubuntu 11.04 32Bit en Windows 7 Ultimate 32Bit

MichielArndts

  • Gast
Beryl hulp...
« Reactie #5 Gepost op: 2007/04/02, 21:01:49 »
dat schiet niet echt op v mij he :P

Offline patrick

  • Lid
Beryl hulp...
« Reactie #6 Gepost op: 2007/04/02, 21:07:35 »
heb je alles gedaan wat er hier staat
http://forum.ubuntu-nl.org/message/87989#p87989
dit is mijn xorg.org file

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "bitmap"
   Load   "dbe"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "be"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "radeon A9550"
   Driver      "ati"
   BusID      "PCI:1:0:0"
   VideoRam   128000
EndSection

Section "Monitor"
   Identifier   "Generieke beeldscherm"
   Option      "DPMS"
   HorizSync   28-64
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "radeon A9550"
   Monitor      "Generieke beeldscherm"
   DefaultDepth   24
   SubSection "Display"
      Depth      1
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1280x1024" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
EndSection

Section "DRI"
   Mode   0666
EndSection

misschien helpt dit
Acer desktop met intel E5200 - 4Gb Ram - ATI RADEON HD3450 256Mb - 640Gb HD en 1 van 320 Gb.
Dual boot systeem met Ubuntu 11.04 32Bit en Windows 7 Ultimate 32Bit

MichielArndts

  • Gast
Beryl hulp...
« Reactie #7 Gepost op: 2007/04/02, 21:25:46 »
Zoek dan de: Section "Device"

en voeg deze lijn toe ergens tussen deze section (maakt niet uit waar, voeg het gewoon toe als een nieuwe lijn, voor de End Section bijvoorbeeld)

Code:

Option  "XAANoOffscreenPixmaps"


Jij zegt dit maar zie die bij jou niet staan...
en bij mij ziet het er zo uit:

Section "Device"
   Identifier   "Generieke videokaart"
   Driver      "ati"
   BusID      "PCI:3:0:0"
   Option          "XAANoOffscreenPixmaps"





Hier ff mijn xorg:


# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/fonts/X11/misc"
   FontPath   "/usr/share/fonts/X11/cyrillic"
   FontPath   "/usr/share/fonts/X11/100dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/75dpi/:unscaled"
   FontPath   "/usr/share/fonts/X11/Type1"
   FontPath   "/usr/share/fonts/X11/100dpi"
   FontPath   "/usr/share/fonts/X11/75dpi"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "dbe"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ImPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "stylus"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "stylus"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "eraser"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "eraser"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "InputDevice"
   Driver      "wacom"
   Identifier   "cursor"
   Option      "Device"   "/dev/wacom"   # Change to
                     # /dev/input/event
                     # for USB
   Option      "Type"      "cursor"
   Option      "ForceDevice"   "ISDV4"      # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Generieke videokaart"
   Driver      "ati"
   BusID      "PCI:3:0:0"
   Option          "XAANoOffscreenPixmaps"
EndSection

Section "Monitor"
   Identifier   "Generieke beeldscherm"
   Option      "DPMS"
   HorizSync   28-96
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Generieke videokaart"
   Monitor      "Generieke beeldscherm"
   DefaultDepth   16
   SubSection "Display"
      Depth      1
      Modes      "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1920x1440" "1920x1200" "1856x1392" "1792x1344" "1680x1050" "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus"   "SendCoreEvents"
   InputDevice     "cursor"   "SendCoreEvents"
   InputDevice     "eraser"   "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

MichielArndts

  • Gast
Beryl hulp...
« Reactie #8 Gepost op: 2007/04/03, 17:31:38 »
heeft iemand de oplossing?