Hallo,
Ik heb een probleem met Ubuntu 10.10. De laptop wordt namelijk met dit OS erg warm, iets wat met Windows 7 niet zo is.
Hier is de output van acpi -V:
Battery 0: Full, 100%
Battery 0: design capacity 5100 mAh, last full capacity 4979 mAh = 97%
Adapter 0: on-line
Thermal 0: ok, 67.0 degrees C
Thermal 0: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 1: ok, 0.0 degrees C
Thermal 1: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 2: ok, 68.0 degrees C
Thermal 2: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 3: ok, 54.0 degrees C
Thermal 3: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 3: trip point 1 switches to mode passive at temperature 102.0 degrees C
Thermal 4: ok, 27.8 degrees C
Thermal 4: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 4: trip point 1 switches to mode passive at temperature 55.0 degrees C
Thermal 5: ok, 60.0 degrees C
Thermal 5: trip point 0 switches to mode critical at temperature 115.0 degrees C
Thermal 6: ok, 48.0 degrees C
Thermal 6: trip point 0 switches to mode critical at temperature 127.0 degrees C
Thermal 7: ok, 37.0 degrees C
Thermal 7: trip point 0 switches to mode critical at temperature 128.0 degrees C
Thermal 8: ok, 0.0 degrees C
Thermal 8: trip point 0 switches to mode critical at temperature 127.0 degrees C
Thermal 9: ok, 46.0 degrees C
Thermal 9: trip point 0 switches to mode critical at temperature 127.0 degrees C
Cooling 0: LCD 0 of 24
Cooling 1: Processor 0 of 10
Cooling 2: Processor 0 of 10
Cooling 3: Processor 0 of 10
Cooling 4: Processor 0 of 10
Cooling 5: Processor 0 of 10
Cooling 6: Processor 0 of 10
Cooling 7: Processor 0 of 10
Cooling 8: Processor 0 of 10
Dit is na 5 minuten gebruik. De temperatuur stijgt binnen no-time naar 77 graden.
Hier is de output van powertop -d:
Collecting data for 15 seconds
Cn Avg residency
C0 (cpu running) ( 1.6%)
polling 0.8ms ( 0.5%)
C1 mwait 0.3ms ( 3.8%)
C3 mwait 6.7ms (94.1%)
P-states (frequencies)
Turbo Mode 15.6%
1.60 Ghz 0.0%
1466 Mhz 0.0%
1333 Mhz 0.0%
933 Mhz 84.3%
Disk accesses:
Wakeups-from-idle per second : 295.2 interval: 15.0s
no ACPI power usage estimate available
Top causes for wakeups:
70.4% (793.1) [acpi] <interrupt>
23.1% (260.6) [kernel scheduler] Load balancing tick
2.6% ( 29.1) [iwlagn] <interrupt>
0.9% ( 9.9) [ahci] <interrupt>
0.6% ( 6.5) [ehci_hcd:usb1, hda_intel, nvidia] <interrupt>
0.4% ( 5.0) syndaemon
0.4% ( 4.3) [kernel core] hrtimer_start (tick_sched_timer)
0.2% ( 2.0) gnome-terminal
0.2% ( 1.9) [kernel core] clocksource_watchdog (clocksource_watchdog)
0.1% ( 1.5) [TLB shootdowns] <kernel IPI>
0.1% ( 1.3) kacpid
0.1% ( 1.0) gvfs-afc-volume
0.1% ( 0.9) [kernel core] iwl_bg_monitor_recover (iwl_bg_monitor_recover)
0.1% ( 0.9) [kernel core] nv_kern_rc_timer (nv_kern_rc_timer)
0.0% ( 0.5) [eth0] <interrupt>
0.0% ( 0.5) udisks-daemon
0.0% ( 0.5) events/0
0.0% ( 0.4) gnome-settings-
0.0% ( 0.4) gnome-panel
0.0% ( 0.4) compiz
0.0% ( 0.3) [Rescheduling interrupts] <kernel IPI>
0.0% ( 0.3) [kernel core] __enqueue_rt_entity (sched_rt_period_timer)
0.0% ( 0.3) update-notifier
0.0% ( 0.3) nautilus
0.0% ( 0.2) flush-8:0
0.0% ( 0.2) USB device 3-3 : USB Optical Mouse (Logitech)
0.0% ( 0.1) NetworkManager
0.0% ( 0.1) clock-applet
0.0% ( 0.1) ssh-agent
0.0% ( 0.1) gvfsd-metadata
0.0% ( 0.1) flush-1:14
0.0% ( 0.1) flush-1:15
0.0% ( 0.1) flush-1:8
0.0% ( 0.1) flush-1:0
0.0% ( 0.1) flush-1:3
0.0% ( 0.1) flush-1:5
0.0% ( 0.1) flush-1:6
0.0% ( 0.1) flush-1:12
0.0% ( 0.1) flush-1:11
0.0% ( 0.1) flush-1:13
0.0% ( 0.1) flush-1:4
0.0% ( 0.1) flush-1:10
0.0% ( 0.1) flush-1:1
0.0% ( 0.1) flush-1:2
0.0% ( 0.1) flush-1:9
0.0% ( 0.1) flush-1:7
0.0% ( 0.1) flush-7:0
0.0% ( 0.1) flush-7:1
0.0% ( 0.1) flush-7:5
0.0% ( 0.1) flush-7:4
An audio device is active 100.0% of the time:
hwC0D0 IDT 92HD75B3X5
A USB device is active 100.0% of the time:
/sys/bus/usb/devices/1-1
Suggestion: Enable Device Power Management by pressing the P key
Suggestion: Enable USB autosuspend for non-input devices by pressing the U key
Suggestion: increase the VM dirty writeback time from 5.00 to 15 seconds with:
echo 1500 > /proc/sys/vm/dirty_writeback_centisecs
This wakes the disk up less frequently for background VM activity
Suggestion: Enable SATA ALPM link power management via:
echo min_power > /sys/class/scsi_host/host0/link_power_management_policy
or press the S key.
Suggestion: Enable wireless power saving mode by executing the following command:
iwconfig wlan0 power timeout 500ms
This will sacrifice network performance slightly to save power.
Suggestion: enable HD audio powersave mode by executing the following command:
echo 1 > /sys/module/snd_hda_intel/parameters/power_save
or by passing power_save=1 as module parameter.
Suggestion: Enable the CONFIG_PM_ADVANCED_DEBUG kernel configuration option.
This option will allow PowerTOP to collect runtime power management statistics.
Recent USB suspend statistics
Active Device name
100.0% USB device 3-3 : USB Optical Mouse (Logitech)
100.0% USB device usb3 : xHCI Host Controller (Linux 2.6.35-power+18-generic xhci_hcd)
100.0% /sys/bus/usb/devices/1-1.3
100.0% USB device 1-1.1 : HP Integrated Module (Broadcom Corp)
0.0% /sys/bus/usb/devices/2-1
100.0% /sys/bus/usb/devices/1-1
0.0% USB device usb2 : EHCI Host Controller (Linux 2.6.35-power+18-generic ehci_hcd)
100.0% USB device usb1 : EHCI Host Controller (Linux 2.6.35-power+18-generic ehci_hcd)
Runtime Device Power Management statistics
Active Device name
Devices without runtime PM
ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers
ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers
ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers
ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers
ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers
ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers
ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers
ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers
ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers
ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder
35 more devices without runtime PM ommitted
Recent audio activity statistics
Active Device name
100.0% hwC0D0 IDT 92HD75B3X5
Recent SATA AHCI link activity statistics
Active Partial Slumber Device name
Overigens heb ik al de patch van
https://bugs.edge.launchpad.net/ubuntu/+source/linux/+bug/524281/+index toegepast, ook zonder resultaat.
De temperatuur stijgt zonder dat de laptop gebruikt wordt.
De specificaties van de laptop zijn overigens:
Intel Core i7 720QM 1,6 GHz
NVIDIA Quadro FX 880M
Iemand enig idee?
Bij voorbaat dank,
Donenzone
edit:
ik zie nu pas in GNOME System Monitor dat één processor altijd een load heeft van ongeveer 70%. Kan het proces echter niet vinden.