Hier mijn hellanzb.conf heb al diverse manieren geprobeerd maar het maakt allemaal geen verschil. Mijn installatie is virtueel.
# hellanzb.conf - sample hellanzb configuration file
#
# To quickly get started, change the default defineServer() call and the
# Hellanzb.PREFIX_DIR directory
#
# This is actually interpreted python code: strings must be surrounded by
# quotes, numbers and the 'None' keyword should not
#
# $Id: hellanzb.conf.sample 1057 2007-03-27 04:13:53Z pjenvey $
# Log output to this file, set to None (no single quotes) for no logging
Hellanzb.LOG_FILE = os.path.expanduser('~') + '/.hellanzb/log'
# Uncomment this line to log DEBUG messages to the specified file
#Hellanzb.DEBUG_MODE = os.path.expanduser('~') + '/.hellanzb/log-debug'
# Automatically roll over both log files when they reach LOG_FILE_MAX_BYTES
# size
Hellanzb.LOG_FILE_MAX_BYTES = 0
# Save LOG_FILE_BACKUP_COUNT of those rolled over log files
Hellanzb.LOG_FILE_BACKUP_COUNT = 0
# Define server connections. Servers can have multiple hosts, hellanzb will
# persist the number of connections to each specified server. There may be
# multiple defineServer lines.
# Set both the username and password to 'None' (without the quotes) if your
# usenet server does not require authorization
defineServer(id = 'test',
hosts = [ 'newszilla.xs4all.nl' ],
#hosts = [ 'newszilla.xs4all.nl', 'newszilla.xs4all.nl:8000' ],
username = None,
password = None,
#username = None, # no auth
#password = None,
connections = 3,
antiIdle = 4.5 * 60, # 4 minutes, 30 seconds, 0 to disable
#bindTo = '204.31.33.7', # connect FROM this ip address
#enabled = False, # disable this server
#skipGroupCmd = False, # skip sending nntp GROUP commands
#fillserver = 0, # defaults to 0 (a main server).
# fillservers must have values > 0
# (priority)
ssl = False
)
# Uncomment this line to limit all server connections to the specified KB/s
# bandwidth
#Hellanzb.MAX_RATE = 150 # limit to 150kB/s
# Important locations
Hellanzb.PREFIX_DIR = os.path.expanduser('~') + '/home/notroot/home/notroot/test/'
# Where to put queued .nzb files
Hellanzb.QUEUE_DIR = Hellanzb.PREFIX_DIR + '/home/notroot/home/notroot/test/nzb/daemon.queue/'
# Where the fully processed archives go
Hellanzb.DEST_DIR = Hellanzb.PREFIX_DIR + 'done/'
# The .nzb currently being downloaded is stored here
Hellanzb.CURRENT_DIR = Hellanzb.PREFIX_DIR + '/home/notroot/test/'
# The archive currently being downloaded is stored here
Hellanzb.WORKING_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.working/'
# Archives interrupted in the middle of downloading are stored here temporarily
Hellanzb.POSTPONED_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.postponed/'
# Archives currently being processed. May contains archive directories, or
# symbolic links to archive directories
Hellanzb.PROCESSING_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.processing/'
# Temp storage
Hellanzb.TEMP_DIR = Hellanzb.PREFIX_DIR + 'nzb/daemon.temp/'
# Filename to store hellanzb state in between CTRL-Cs. The state (includes the
# order of the queue, and smart par recovery information) is intermittently
# written out as XML to this file
Hellanzb.STATE_XML_FILE = Hellanzb.PREFIX_DIR + 'nzb/hellanzbState.xml'
# _Sub directory within the nzb archive dir_ to move processed files to
Hellanzb.PROCESSED_SUBDIR = 'processed'
# Remove the PROCESSED_SUBDIR if the archive was successfully post processed.
# Warning: The normal Hellanzb.LOG_FILE should be enabled with this option --
# for a record of what hellanzb deletes
Hellanzb.DELETE_PROCESSED = True
# Maximum amount of memory used to cache encoded Article data segments.
# hellanzb will write article data to disk when this cache is exceeded
# Available settings:
# -1: Unlimited size
# 0: Disable cache (only cache to disk)
# >0: Limit cache to this size, in bytes, KB, MB, e.g.:
# 1024 '1024KB' '100MB' '1GB'
#Hellanzb.CACHE_LIMIT = 0
# Save archives into a sub directory of DEST_DIR named after their newzbin.com
# category (when queued using the enqueuenewzbin XMLRPC call); e.g. Apps,
# Movies, Music
Hellanzb.CATEGORIZE_DEST = True
# Disable SMART_PAR (download all PAR files)
#Hellanzb.SMART_PAR = False
# Supply a path to the (un)rar command
#Hellanzb.UNRAR_CMD = None
# Supply a path to the par2 command
Hellanzb.PAR2_CMD = '/usr/bin/par2'
# Skip unraring during post processing
Hellanzb.SKIP_UNRAR = True
# Supply a path to the optional macbinconv command (for converting MacBinary
# files)
#Hellanzb.MACBINCONV_CMD = None
# hellanzb inherits the umask from the current user's environment (unless it's
# running in daemon mode). The umask can be forced with this option
#Hellanzb.UMASK = 0022
# Supported music types (case insensitive) and optionally their decompression
# executables
# and the file type that executable will decompress to (case insensitive). The
# exes must be in the PATH.
#
# <FILE> will be replaced with the name of music file
# optional <DESTFILE> is <FILE> with the specified extension
#
# None means these files don't need to be decompressed
defineMusicType('wav', None, None)
defineMusicType('mp3', None, None)
#defineMusicType('ape', 'mac <FILE> <DESTFILE> -d', 'wav')
#defineMusicType('flac', 'flac -d -- <FILE>', 'wav')
#defineMusicType('shn', 'shorten -x < <FILE> > <DESTFILE>', 'wav')
# Max files we should decompress at the same time
Hellanzb.MAX_DECOMPRESSION_THREADS = 2
# Enable Mac OS X Growl notifications
Hellanzb.GROWL_NOTIFY = False
# The growl notification server, in the format 'hostname'
Hellanzb.GROWL_SERVER = 'IP'
# The growl password
Hellanzb.GROWL_PASSWORD = 'password'
# Enable libNotify Daemon notifications
Hellanzb.LIBNOTIFY_NOTIFY = False
# Disable ANSI color codes in the main screen (preserves the in place scroller)
#Hellanzb.DISABLE_COLORS = False
# Disable ALL ANSI color codes in the main screen (for terminals that don't
# support ANY ANSI codes
#Hellanzb.DISABLE_ANSI = False
# Hostname for the XMLRPC client to connect to. By default, localhost
Hellanzb.XMLRPC_SERVER = 'localhost'
# IP address on which the XMLRPC Server will be binded to.
# Type '0.0.0.0' for any interfaces, '127.0.0.1' will disable remote access
Hellanzb.XMLRPC_SERVER_BIND = '127.0.0.1'
# Port number the XML RPC server will listen on, and the client will connect to.
# Set to 'None' (without the quotes!) for no XML RPC server
Hellanzb.XMLRPC_PORT = 8760
# Password for the XML RPC server. You might probably never use this, but the
# command line XML RPC calls do -- it should definitely be changed from its
# default value. The XML RPC username is hardcoded as 'hellanzb' -- E.g. URL:
#
http://hellanzb:changeme@localhost:8760Hellanzb.XMLRPC_PASSWORD = 'changeme'
# Username/Password to
http://www.newzbin.com for automatic NZB downloading
Hellanzb.NEWZBIN_USERNAME = None
Hellanzb.NEWZBIN_PASSWORD = None
# If any of the following file types are missing from the archive and cannot be
# repaired, continue processing because they're unimportant (case insensitive)
Hellanzb.NOT_REQUIRED_FILE_TYPES = [ 'log', 'm3u', 'nfo', 'nzb', 'sfv', 'txt' ]
# Don't get rid of (move into the PROCESSED dir) the following file types when
# finished post processing (case insensitive)
#Hellanzb.KEEP_FILE_TYPES = [ 'log', 'm3u', 'nfo', 'nzb', 'sfv', 'txt' ]
Hellanzb.KEEP_FILE_TYPES = [ 'nfo', 'txt' ]
# List of alternative file extensions matched as NZB files in the QUEUE_DIR.
# The 'nzb' file extension is always matched
#Hellanzb.OTHER_NZB_FILE_TYPES = [ 'xml' ]
# Support extracting NZBs from ZIP files with this suffix (case insensitive) in
# QUEUE_DIR. Defaults to '.nzb.zip'. Set to False to disable.
#Hellanzb.NZB_ZIPS = '.nzb.zip'
# Support extracting NZBs from GZIP files with this suffix (case insensitive)
# in QUEUE_DIR. Defaults to '.nzb.gz'. Set to False to disable.
#Hellanzb.NZB_GZIPS = '.nzb.gz'
# Delay enqueueing new, recently modified NZB files added to the QUEUE_DIR until
# this many seconds have passed since the NZB's last modification time (defaults
# to 10 seconds)
#Hellanzb.NZBQUEUE_MDELAY = 10
# Optional external handler script. hellanzb will run this script after post
# processing an archive, with the following arguments:
#
# handler_script type archiveName destDir elapsedTime parMessage
#
# type: post processing result, either 'SUCCESS' or 'ERROR'
# archiveName: name of the archive, e.g. 'Usenet_Post5'
# destDir: where the archive ended up, e.g. '/ext2/usenet/Usenet_Post5'
# elapsedTime: a pretty string showing how long post processing took, e.g.
# '10m 37s'
# parMessage: optional post processing message. e.g. '(No Pars)'
#Hellanzb.EXTERNAL_HANDLER_SCRIPT = '~/bin/post_hellanzb.sh'
notroot@ubuntu:/etc$
Mijn provider is xs4all hierbij hoef je geen gebruikersnaam en wachtwoord in te vullen
