cartreader niet te vinden

[Skilltone]

Goede avond,

Ik heb drie cartreaders en die vind ubuntu niet. Cartreader 1 zit ingebouwd in me pc, die vind hij niet, terwijl diskette en dvd brander juist wel. De tweede zit ingebouwd in me hp2575 printer. ik kan wel foto's inladen, maar niks terugsturen. en de derde is een hama 35 in 1 plug and pray reader, die ziet hij helemaal niet.

Ik kan de zoekfunctie op forum nog steeds niet gebruiken, daarom maar even een topic. Heeft iemand een idee, hoe ik dit kan oplossen? Ik wil verkeer/data heen en weer kunnen sturen.

Mvg

Martin

[tabasco]

Ha Martin, allereerst, het is inderdaad vervelend dat de ingebouwde zoekfunctie niet werkt maar je kunt de google zoekfunctie van deze pagina ook gebruiken, helemaal rechts boven aan deze pagina. (tip: spel het woord cardreader met een letter 'd')

Als je in een terminal venster het commando lsusb ingeeft, worden de apparaten wellicht zichtbaar. Je kunt hier de uitkomst plaatsen. (Wat betreft je printer heb ik geen idee)

[Skilltone]

martin@martin-desktop:~$ lsusb
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 004: ID 1241:1603 Belkin
Bus 001 Device 003: ID 046d:c01d Logitech, Inc. MX510 Optical Mouse
Bus 001 Device 002: ID 0df6:000b Sitecom Europe B.V.
Bus 001 Device 001: ID 0000:0000  
martin@martin-desktop:~$

Alleen Belkin komt mij onbekend voor. Sitecom is me bleutooth ontvanger, en logitech is me muis. (printer is trouwens verbonden met me router, dus die staat er logische wijs er niet bij)

[tabasco]

En het commando lspci wat geeft dat weer?

[Skilltone]

Een hoop

martin@martin-desktop:~$ lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a2)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev a2)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a2)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB82AA2 IEEE-1394b Link Layer Controller (rev 01)
05:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2)

[lizardman]

De cardreader in de hp2575 is voor zover ik weet alleen bedoeld om te unloaden. Dus foto's vanaf het kaartje te printen of naar je computer te halen (zo gebruik ik hem tenminste) Niet voor uploaden naar het kaartje.

[tabasco]

En alleen je hama cardreader wordt dus niet herkend?
Probeer eens een andere usb port (en kabel)

[Skilltone]

me cardreader in me pc ingebouwd ook niet, denk ik. als ik er een kaart in doet, geef tie niks aan, en onder locaties ziet hij geen kaart. de hama cardreader word wel herkend door xp op me andere pc.

[Skilltone]

Goede avond,

In de rommelbak vond ik nog een oude sandisk cardreader voor win 98. het rare is, deze doet niks op xp, wel onder ubuntu. ik denk dat hama niet word ondersteund en die cardreader in me pc, over de huizen is. maar zo is ook opgelost.

dankje wel

martin

[tabasco]

Plug je hama cardreader in je pc en typ in een terminal venster:
dmesg
De laatste regels zullen aangeven wat er wordt herkend. Plaats deze eventueel hier.

[Skilltone]

Ik heb me sandisk reader afgehaald, de hama erop en toen dmesg ingevuld;

Code: [Selecteer]

[   53.124220] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (1 cpu cores) (version 2.20.00)
[   53.124257] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x6
[   53.124260] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12
[   57.186959] ppdev: user-space parallel port driver
[   57.389400] audit(1209406966.240:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5150 profile="/usr/sbin/cupsd" namespace="default"
[   57.767746] Bluetooth: L2CAP ver 2.9
[   57.767751] Bluetooth: L2CAP socket layer initialized
[   57.855639] Bluetooth: RFCOMM socket layer initialized
[   57.855656] Bluetooth: RFCOMM TTY layer initialized
[   57.855658] Bluetooth: RFCOMM ver 1.8
[   59.603777] Marking TSC unstable due to cpufreq changes
[   59.805832] Clocksource tsc unstable (delta = -162124306 ns)
[   61.192417] NET: Registered protocol family 17
[   62.528263] NET: Registered protocol family 10
[   62.528917] lo: Disabled Privacy Extensions
[   68.329769] eth0: no IPv6 routers present
[  100.861185] ISO 9660 Extensions: Microsoft Joliet Level 3
[  100.863585] ISOFS: changing to secondary root
[  800.983180] ISO 9660 Extensions: Microsoft Joliet Level 3
[  800.985582] ISOFS: changing to secondary root
[ 1507.345922] cdrom: This disc doesn't have any tracks I recognize!
[ 2008.221252] end_request: I/O error, dev fd0, sector 0
[ 5450.207931] python[7562]: segfault at 6379 rip 7fc28746589c rsp 7fff906ee000 error 4
[ 7584.189187] usb 2-3: new high speed USB device using ehci_hcd and address 5
[ 7584.469874] usb 2-3: configuration #1 chosen from 1 choice
[ 7584.580135] usbcore: registered new interface driver libusual
[ 7584.604621] Initializing USB Mass Storage driver...
[ 7584.607551] scsi6 : SCSI emulation for USB Mass Storage devices
[ 7584.610581] usbcore: registered new interface driver usb-storage
[ 7584.610589] USB Mass Storage support registered.
[ 7584.611785] usb-storage: device found at 5
[ 7584.612167] usb-storage: waiting for device to settle before scanning
[ 7589.604815] usb-storage: device scan complete
[ 7589.606293] scsi 6:0:0:0: Direct-Access     Generic  USB  CF Reader   0.00 PQ: 0 ANSI: 2
[ 7589.608162] scsi 6:0:0:1: Direct-Access     Generic  USB  SD Reader   0.00 PQ: 0 ANSI: 2
[ 7589.610158] scsi 6:0:0:2: Direct-Access     Generic  USB  MS Reader   0.00 PQ: 0 ANSI: 2
[ 7589.612153] scsi 6:0:0:3: Direct-Access     Generic  USB  SM Reader   0.00 PQ: 0 ANSI: 2
[ 7589.616223] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7589.616482] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7589.620182] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 7589.620374] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 7589.624172] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 7589.624765] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 7589.629200] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 7589.629847] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 7596.670988] sd 6:0:0:0: [sdb] 125184 512-byte hardware sectors (64 MB)
[ 7596.673856] sd 6:0:0:0: [sdb] Write Protect is off
[ 7596.673860] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7596.673863] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7596.681965] sd 6:0:0:0: [sdb] 125184 512-byte hardware sectors (64 MB)
[ 7596.684836] sd 6:0:0:0: [sdb] Write Protect is off
[ 7596.684839] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7596.684841] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7596.684849]  sdb: sdb1
[ 8433.107266] usb 2-3: USB disconnect, address 5
67] io scheduler cfq registered (default)
[   28.248501] PCImartin@martin-desktop:~$ [   27.481249] ACPI: PCI Interrupt Li 21 22 23) *0Qs 20
bash: syntaxfout nabij onverwacht symbool '('
: Found disabled HT MSI Mapping on 0000:00:0b.0
[   28.248512] PCI: Fmartin@martin-desktop:~$ [   27.481438] ACPI: PCI Interrupt Link [APCK]
ound enabled HT MSI Mapping on 0000:00:00.0* iets ingekort

[tabasco]

Plug je hama cardreader in je pc en typ in een terminal venster:
dmesg
De laatste regels zullen aangeven wat er wordt herkend. Plaats deze eventueel hier.

Wel grappig dat je alles hebt geplaatst
Je ziet volgens mij de sandisk goed verschijnen en verwijdert worden. Daarna dit:

Code: [Selecteer]

67] io scheduler cfq registered (default)
[   28.248501] PCImartin@martin-desktop:~$ [   27.481249] ACPI: PCI Interrupt Li 21 22 23) *0Qs 20
bash: syntaxfout nabij onverwacht symbool '('
: Found disabled HT MSI Mapping on 0000:00:0b.0
[   28.248512] PCI: Fmartin@martin-desktop:~$ [   27.481438] ACPI: PCI Interrupt Link [APCK]
ound enabled HT MSI Mapping on 0000:00:00.0Voor mij onduidelijk!

(Misschien kun je je post bewerken door de output tussen [ code ] [/ code ] tags te plaatsen)

[Skilltone]

Goede middag,

Ik starte vanmiddag me pc, en toen herkende hij de hama wel. de inbouw cardreader van me pc nog steeds niet. En hoe dit ineens komt, geen idee.

Tog Tabasco voor je antwoorden.

Mvg

Martin

[tabasco]

Mooi dat die het doet! Toch een slecht kabeltje misschien?

[merijn]

Hoi,ik heb ook een probleem met mijn cardreader het is een alles in een lezer.
Deze zit ingebouwd in mijn pc.
Maar mijn sdcard van 4gb wordt niet herkend als extra opslagmedium.
Althans ik kan nergens een extra sda drive vinden bij de mount.
Het lampje van de usb2.0 aansluiting brand constant op mijn kaartlezer.
Wanneer ik mijn sdcard in het daarvoor bestemde slot steek brand er even een ander lampje wel even,en gaat dan weer uit.
Voor de duidelijkheid ik heb een Asus p5k-vm moederbord.
Core 2 duo E8200 processor 2,66 ghz 6mb cache op een bussnelheid van 1333 mhz
daarop 4gb intern geheugen.
Samsung 320gb hd
Lite-on dvdbrander lh-20a1s
---------------------------------

Ik heb dus gekeken met mount.
Dan krijg ik dit te zien.



/dev/sda5 on / type reiserfs (rw,relatime)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.24-20-generic/volatile type tmpfs (rw)
/dev/sda1 on /boot type ext3 (rw,relatime)
/dev/sda6 on /home type reiserfs (rw,relatime)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/merijn/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=merijn)

en als ik alles controleer met,dmesg dan krijg ik dit.
Ik kan allemaal niet uit de meldingen komen.
Misschien weet iemand wat er aan de hand kan zijn.
--------------------------------------------------

)
[   24.210344] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   24.211225] Mount-cache hash table entries: 256
[   24.211322] Initializing cgroup subsys ns
[   24.211326] Initializing cgroup subsys cpuacct
[   24.211338] CPU: L1 I cache: 32K, L1 D cache: 32K
[   24.211339] CPU: L2 cache: 6144K
[   24.211341] CPU 0/0 -> Node 0
[   24.211342] using mwait in idle threads.
[   24.211344] CPU: Physical Processor ID: 0
[   24.211345] CPU: Processor Core ID: 0
[   24.211349] CPU0: Thermal monitoring enabled (TM2)
[   24.211360] SMP alternatives: switching to UP code
[   24.212056] Early unpacking initramfs... done
[   24.470598] ACPI: Core revision 20070126
[   24.470637] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   24.535427] Using local APIC timer interrupts.
[   24.572929] APIC timer calibration result 20832937
[   24.572930] Detected 20.832 MHz APIC timer.
[   24.572985] SMP alternatives: switching to SMP code
[   24.573592] Booting processor 1/2 APIC 0x1
[   24.584217] Initializing CPU#1
[   24.676931] Calibrating delay using timer specific routine.. 5333.22 BogoMIPS (lpj=10666456)
[   24.676936] CPU: L1 I cache: 32K, L1 D cache: 32K
[   24.676937] CPU: L2 cache: 6144K
[   24.676938] CPU 1/1 -> Node 0
[   24.676939] CPU: Physical Processor ID: 0
[   24.676940] CPU: Processor Core ID: 1
[   24.676944] CPU1: Thermal monitoring enabled (TM2)
[   24.677637] Intel(R) Core(TM)2 Duo CPU     E8200  @ 2.66GHz stepping 06
[   24.677739] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   24.697756] Brought up 2 CPUs
[   24.697816] CPU0 attaching sched-domain:
[   24.697817]  domain 0: span 03
[   24.697818]   groups: 01 02
[   24.697820]   domain 1: span 03
[   24.697821]    groups: 03
[   24.697822] CPU1 attaching sched-domain:
[   24.697823]  domain 0: span 03
[   24.697824]   groups: 02 01
[   24.697825]   domain 1: span 03
[   24.697826]    groups: 03
[   24.697990] net_namespace: 120 bytes
[   24.698244] Time: 12:28:03  Date: 07/24/08
[   24.698263] NET: Registered protocol family 16
[   24.698394] ACPI: bus type pci registered
[   24.698444] PCI: Using configuration type 1
[   24.700742] ACPI: EC: Look up EC in DSDT
[   24.705860] ACPI: Interpreter enabled
[   24.705862] ACPI: (supports S0 S1 S3 S4 S5)
[   24.705873] ACPI: Using IOAPIC for interrupt routing
[   24.712463] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   24.713068] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   24.713070] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   24.713649] PCI: Transparent bridge - 0000:00:1e.0
[   24.713672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   24.713787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[   24.713853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   24.713941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[   24.714008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[   24.714083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[   24.727111] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   24.727202] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   24.727292] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[   24.727382] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[   24.727471] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[   24.727560] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[   24.727649] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[   24.727738] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[   24.727824] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  FB, should be F6 [20070126]
[   24.727834] Linux Plug and Play Support v0.97 (c) Adam Belay
[   24.727853] pnp: PnP ACPI init
[   24.727858] ACPI: bus type pnp registered
[   24.730794] pnp: PnP ACPI: found 15 devices
[   24.730796] ACPI: ACPI bus type pnp unregistered
[   24.730952] PCI: Using ACPI for IRQ routing
[   24.730953] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   24.744953] NET: Registered protocol family 8
[   24.744955] NET: Registered protocol family 20
[   24.744983] PCI-GART: No AMD northbridge found.
[   24.744987] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[   24.744990] hpet0: 4 64-bit timers, 14318180 Hz
[   24.746013] AppArmor: AppArmor Filesystem Enabled
[   24.748931] Time: tsc clocksource has been installed.
[   24.748937] Switched to high resolution mode on CPU 0
[   24.749750] Switched to high resolution mode on CPU 1
[   24.756927] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[   24.756934] system 00:07: ioport range 0x290-0x297 has been reserved
[   24.756939] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[   24.756941] system 00:08: ioport range 0x800-0x87f has been reserved
[   24.756943] system 00:08: ioport range 0x480-0x4bf has been reserved
[   24.756946] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[   24.756948] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[   24.756951] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[   24.756953] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
[   24.756956] system 00:08: iomem range 0xfff00000-0xfffffffe could not be reserved
[   24.756961] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[   24.756964] system 00:0b: iomem range 0xfee00000-0xfee00fff could not be reserved
[   24.756969] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[   24.756973] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   24.756976] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[   24.756978] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   24.756981] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[   24.756983] system 00:0e: iomem range 0x0-0x0 could not be reserved
[   24.757250] PCI: Bridge: 0000:00:01.0
[   24.757251]   IO window: b000-bfff
[   24.757253]   MEM window: fa000000-fe9fffff
[   24.757255]   PREFETCH window: d0000000-dfffffff
[   24.757257] PCI: Bridge: 0000:00:1c.0
[   24.757258]   IO window: disabled.
[   24.757260]   MEM window: disabled.
[   24.757262]   PREFETCH window: f8f00000-f8ffffff
[   24.757266] PCI: Bridge: 0000:00:1c.4
[   24.757267]   IO window: d000-dfff
[   24.757270]   MEM window: disabled.
[   24.757272]   PREFETCH window: disabled.
[   24.757275] PCI: Bridge: 0000:00:1c.5
[   24.757276]   IO window: c000-cfff
[   24.757279]   MEM window: fea00000-feafffff
[   24.757281]   PREFETCH window: disabled.
[   24.757284] PCI: Bridge: 0000:00:1e.0
[   24.757285]   IO window: e000-efff
[   24.757288]   MEM window: feb00000-febfffff
[   24.757290]   PREFETCH window: disabled.
[   24.757300] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[   24.757303] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   24.757314] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[   24.757318] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   24.757329] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
[   24.757332] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   24.757343] ACPI: PCI Interrupt 0000:00:1c.5 -> GSI 16 (level, low) -> IRQ 16
[   24.757346] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   24.757353] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   24.757359] NET: Registered protocol family 2
[   24.793017] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   24.793727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[   24.796229] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   24.796664] TCP: Hash tables configured (established 524288 bind 65536)
[   24.796665] TCP reno registered
[   24.805041] checking if image is initramfs... it is
[   25.314090] Freeing initrd memory: 7544k freed
[   25.316428] audit: initializing netlink socket (disabled)
[   25.316444] audit(1216902483.164:1): initialized
[   25.317867] VFS: Disk quotas dquot_6.5.1
[   25.317913] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   25.317996] io scheduler noop registered
[   25.317997] io scheduler anticipatory registered
[   25.317998] io scheduler deadline registered
[   25.318062] io scheduler cfq registered (default)
[   25.323250] Boot video device is 0000:01:00.0
[   25.323364] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   25.323383] assign_interrupt_mode Found MSI capability
[   25.323401] Allocate Port Service[0000:00:01.0:pcie00]
[   25.323449] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   25.323477] assign_interrupt_mode Found MSI capability
[   25.323499] Allocate Port Service[0000:00:1c.0:pcie00]
[   25.323521] Allocate Port Service[0000:00:1c.0:pcie02]
[   25.323573] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[   25.323601] assign_interrupt_mode Found MSI capability
[   25.323623] Allocate Port Service[0000:00:1c.4:pcie00]
[   25.323643] Allocate Port Service[0000:00:1c.4:pcie02]
[   25.323699] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[   25.323726] assign_interrupt_mode Found MSI capability
[   25.323748] Allocate Port Service[0000:00:1c.5:pcie00]
[   25.323767] Allocate Port Service[0000:00:1c.5:pcie02]
[   25.339231] Real Time Clock Driver v1.12ac
[   25.339351] hpet_resources: 0xfed00000 is busy
[   25.339378] Linux agpgart interface v0.102
[   25.339379] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   25.339475] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   25.339827] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   25.340274] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   25.340313] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   25.340367] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   25.340369] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[   25.340842] serio: i8042 KBD port at 0x60,0x64 irq 1
[   25.357431] mice: PS/2 mouse device common for all mice
[   25.357459] cpuidle: using governor ladder
[   25.357461] cpuidle: using governor menu
[   25.357552] NET: Registered protocol family 1
[   25.357613] registered taskstats version 1
[   25.357690]   Magic number: 0:9:482
[   25.357719] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   25.357721] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   25.357722] EDD information not available.
[   25.357728] Freeing unused kernel memory: 320k freed
[   25.387174] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   26.474049] fuse init (API version 7.9)
[   26.484636] ACPI: SSDT CFF90100, 01D2 (r1    AMI   CPU1PM        1 INTL 20060113)
[   26.485059] ACPI: SSDT CFF902E0, 0143 (r1    AMI   CPU2PM        1 INTL 20060113)
[   26.485384] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   26.485390] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   26.545504] usbcore: registered new interface driver usbfs
[   26.545518] usbcore: registered new interface driver hub
[   26.545533] usbcore: registered new device driver usb
[   26.545986] USB Universal Host Controller Interface driver v3.0
[   26.546021] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[   26.546029] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[   26.546031] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   26.546157] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   26.546178] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[   26.546250] usb usb1: configuration #1 chosen from 1 choice
[   26.546263] hub 1-0:1.0: USB hub found
[   26.546267] hub 1-0:1.0: 2 ports detected
[   26.649345] ACPI: PCI Interrupt 0000:00:1a.1 -> GSI 21 (level, low) -> IRQ 21
[   26.649354] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[   26.649356] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   26.649372] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   26.649394] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[   26.649459] usb usb2: configuration #1 chosen from 1 choice
[   26.649473] hub 2-0:1.0: USB hub found
[   26.649476] hub 2-0:1.0: 2 ports detected
[   26.684714] SCSI subsystem initialized
[   26.703424] libata version 3.00 loaded.
[   26.753361] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[   26.753371] PCI: Setting latency timer of device 0000:00:1a.2 to 64
[   26.753373] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   26.753388] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[   26.753410] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[   26.753477] usb usb3: configuration #1 chosen from 1 choice
[   26.753493] hub 3-0:1.0: USB hub found
[   26.753497] hub 3-0:1.0: 2 ports detected
[   26.857353] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[   26.858668] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[   26.858672] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   26.858708] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4
[   26.862618] ehci_hcd 0000:00:1a.7: debug port 1
[   26.862622] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[   26.862627] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[   26.876765] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   26.876834] usb usb4: configuration #1 chosen from 1 choice
[   26.876849] hub 4-0:1.0: USB hub found
[   26.876853] hub 4-0:1.0: 6 ports detected
[   26.980826] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   26.982069] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   26.982074] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   26.982117] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   26.986029] ehci_hcd 0000:00:1d.7: debug port 1
[   26.986033] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   26.986040] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[   27.000756] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   27.000844] usb usb5: configuration #1 chosen from 1 choice
[   27.000868] hub 5-0:1.0: USB hub found
[   27.000872] hub 5-0:1.0: 6 ports detected
[   27.104834] ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 20 (level, low) -> IRQ 20
[   27.105182] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   27.105189] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   27.105191] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   27.105203] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   27.105222] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[   27.105280] usb usb6: configuration #1 chosen from 1 choice
[   27.105292] hub 6-0:1.0: USB hub found
[   27.105296] hub 6-0:1.0: 2 ports detected
[   27.157931] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[febff800-febfffff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   27.208796] ACPI: PCI Interrupt 0000:00:1d.1 -> GSI 19 (level, low) -> IRQ 19
[   27.208802] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   27.208805] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   27.208821] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   27.208842] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[   27.208908] usb usb7: configuration #1 chosen from 1 choice
[   27.208921] hub 7-0:1.0: USB hub found
[   27.208925] hub 7-0:1.0: 2 ports detected
[   27.312781] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   27.312787] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   27.312790] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   27.312804] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   27.312823] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[   27.312890] usb usb8: configuration #1 chosen from 1 choice
[   27.312902] hub 8-0:1.0: USB hub found
[   27.312906] hub 8-0:1.0: 2 ports detected
[   27.417477] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 22 (level, low) -> IRQ 22
[   27.417496] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   27.417503] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[   27.417516] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 22 (level, low) -> IRQ 22
[   27.417529] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   27.417534] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[   27.417553] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   27.417570] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   27.417578] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[   27.420935] ata_piix 0000:00:1f.2: version 2.12
[   27.420939] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[   27.420949] ACPI: PCI Interrupt 0000:00:1f.2 -> GSI 22 (level, low) -> IRQ 22
[   27.420965] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[   27.421945] scsi0 : ata_piix
[   27.422599] scsi1 : ata_piix
[   27.423418] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22
[   27.423420] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22
[   27.600987] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
[   27.600990] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   27.609482] ata1.00: configured for UDMA/133
[   27.812698] usb 5-3: new high speed USB device using ehci_hcd and address 2
[   27.944857] ata2.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L09, max UDMA/100
[   27.946757] usb 5-3: configuration #1 chosen from 1 choice
[   28.073226] usbcore: registered new interface driver libusual
[   28.075779] Initializing USB Mass Storage driver...
[   28.132842] ata2.00: configured for UDMA/100
[   28.132907] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
[   28.134086] scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1S   9L09 PQ: 0 ANSI: 5
[   28.134137] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[   28.134151] ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 22 (level, low) -> IRQ 22
[   28.134172] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   28.134197] scsi2 : ata_piix
[   28.134219] scsi3 : ata_piix
[   28.134904] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[   28.134906] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[   28.313157] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   28.432710] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0001102e03]
[   28.463748] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   28.463773] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   28.463961] scsi4 : pata_jmicron
[   28.464191] scsi5 : pata_jmicron
[   28.464448] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[   28.464450] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[   28.469476] Driver 'sd' needs updating - please use bus_type methods
[   28.469901] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   28.469908] sd 0:0:0:0: [sda] Write Protect is off
[   28.469909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.469919] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.469950] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[   28.469955] sd 0:0:0:0: [sda] Write Protect is off
[   28.469957] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.469966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   28.469969]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   28.471434] usb 2-1: configuration #1 chosen from 1 choice
[   28.500502]  sda1 sda2 < sda5 sda6 sda7 >
[   28.546261] sd 0:0:0:0: [sda] Attached SCSI disk
[   28.548534] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   28.548544] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   28.557568] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   28.557570] Uniform CD-ROM driver Revision: 3.20
[   28.557593] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   28.717129] usb 3-2: new low speed USB device using uhci_hcd and address 2
[   28.805676] Attempting manual resume
[   28.805677] swsusp: Resume From Partition 8:7
[   28.805678] PM: Checking swsusp image.
[   28.805827] PM: Resume from disk failed.
[   28.809827] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[   28.809832] ReiserFS: sda5: using ordered data mode
[   28.831711] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   28.831989] ReiserFS: sda5: checking transaction log (sda5)
[   28.857194] ReiserFS: sda5: Using r5 hash to sort names
[   28.893470] usb 3-2: configuration #1 chosen from 1 choice
[   28.896491] scsi6 : SCSI emulation for USB Mass Storage devices
[   28.896537] usbcore: registered new interface driver usb-storage
[   28.896539] USB Mass Storage support registered.
[   28.896604] usb-storage: device found at 2
[   28.896606] usb-storage: waiting for device to settle before scanning
[   33.900458] iTCO_vendor_support: vendor-support=0
[   34.162830] usb-storage: device scan complete
[   34.174093] scsi 6:0:0:0: Direct-Access     AVEX     AX1611        CF 1.9C PQ: 0 ANSI: 0 CCS
[   34.175213] scsi 6:0:0:1: Direct-Access     AVEX     AX1611        MS 1.9C PQ: 0 ANSI: 0 CCS
[   34.176464] scsi 6:0:0:2: Direct-Access     AVEX     AX1611    MMC/SD 1.9C PQ: 0 ANSI: 0 CCS
[   34.177588] scsi 6:0:0:3: Direct-Access     AVEX     AX1611        SM 1.9C PQ: 0 ANSI: 0 CCS
[   34.177816] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[   34.177868] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[   34.177895] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   34.209727] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   34.209766] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   34.210859] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[   34.210895] sd 6:0:0:1: Attached scsi generic sg3 type 0
[   34.212107] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   34.212139] sd 6:0:0:2: Attached scsi generic sg4 type 0
[   34.213253] sd 6:0:0:3: [sde] Attached SCSI removable disk
[   34.213286] sd 6:0:0:3: Attached scsi generic sg5 type 0
[   34.219211] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   34.235237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   34.350507] parport_pc 00:06: reported by Plug and Play ACPI
[   34.350609] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[   34.370262] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   34.452283] input: Power Button (FF) as /devices/virtual/input/input3
[   34.480695] ACPI: Power Button (FF) [PWRF]
[   34.480757] input: Power Button (CM) as /devices/virtual/input/input4
[   34.512688] ACPI: Power Button (CM) [PWRB]
[   34.688262] nvidia: module license 'NVIDIA' taints kernel.
[   35.046829] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[   35.046836] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   35.046892] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[   35.114325] usbcore: registered new interface driver hiddev
[   35.129025] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb3/3-2/3-2:1.0/input/input5
[   35.138650] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   35.138662] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   35.139920] sky2 0000:02:00.0: v1.20 addr 0xfeafc000 irq 17 Yukon-EC Ultra (0xb4) rev 3
[   35.140228] sky2 eth0: addr 00:1e:8c:ec:11:ab
[   35.175523] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   35.176801] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   35.188674] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-2
[   35.188685] usbcore: registered new interface driver usbhid
[   35.188688] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   35.210477] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   35.618241] sky2 eth0: enabling interface
[   36.473780] loop: module loaded
[   36.486200] lp0: using parport0 (interrupt-driven).
[   36.575782] Adding 1919728k swap on /dev/sda7.  Priority:-1 extents:1 across:1919728k
[   37.437404] NET: Registered protocol family 17
[   37.445470] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[   43.341265] NET: Registered protocol family 10
[   43.341400] lo: Disabled Privacy Extensions
[   53.769511] eth0: no IPv6 routers present
[   67.232737] kjournald starting.  Commit interval 5 seconds
[   67.240122] EXT3 FS on sda1, internal journal
[   67.240126] EXT3-fs: mounted filesystem with ordered data mode.
[   67.253442] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[   67.253448] ReiserFS: sda6: using ordered data mode
[   67.257917] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   67.258242] ReiserFS: sda6: checking transaction log (sda6)
[   67.286552] ReiserFS: sda6: Using r5 hash to sort names
[   67.514729] ip_tables: (C) 2000-2006 Netfilter Core Team
[   67.542683] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   67.994805] No dock devices found.
[   68.852447] ppdev: user-space parallel port driver
[   68.954598] audit(1216895327.549:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5845 profile="/usr/sbin/cupsd" namespace="default"
[   71.602149] Bluetooth: Core ver 2.11
[   71.602429] NET: Registered protocol family 31
[   71.602432] Bluetooth: HCI device and connection manager initialized
[   71.602434] Bluetooth: HCI socket layer initialized
[   71.615713] Bluetooth: L2CAP ver 2.9
[   71.615716] Bluetooth: L2CAP socket layer initialized
[   71.649305] Bluetooth: RFCOMM socket layer initialized
[   71.649316] Bluetooth: RFCOMM TTY layer initialized
[   71.649317] Bluetooth: RFCOMM ver 1.8
[ 3512.959165] gpar2[30111] general protection rip:7ffb654b9796 rsp:7fff72399a48 error:0
merijn@ubuntu:~$

-----------------
goed wat gpar2 is dat weet ik wel,maar die draait niet op het moment,maar als ik er mee werk dan doet dat programma het gewoon wel goed,met bestanden van de nieuwsgroepen repareren.
Dus daar kan het niet aan liggen.
Voor de duidlijkheid werk ik dus met Ubuntu Hardy X64 8.0.4.1
Wie o wie kan mij misschien antwoord geven,bedankt.

[tabasco]

Beste merijn,
Ik denk dat je beter zelf een nieuw topic kunt beginnen...

[merijn]

ok bedankt,ik zal eens kijken dan.

[merijn]

het schijnt niet te werken een cardreader onder Linux op het moment.
Het is uitgezocht,mijn broertje werkt al jaren met Linux en heeft alsmaar zitten vogelen om een cardreader aan de praat te krijgen met Linux,maar te vergeefs.
Wat wel kan is een sdcard in een verloopstukje plaatsen,ik bedoel dat er een verloopstukje bestaat dat je een sdcard in een usb poort kan doen,dan kan je je sdcard gebruiken als usbstick en dan werkt alles ineens wel.
Merkwaardig,dat het niet gewoon werkt,maar alleen op deze weg.
Kennelijk is het niemand nog gelukt om de kernel van Linux zo aan te passen dat een cardreader gewoon ook moet werken.
Misschien is het gewoon niet mogelijk onder Linux,maar goed dat lijkt mij sterk,want met Linux kan je alles bereiken toch?.
Als het met Windows wel zonder problemen werkt,dan moet er echt een tijd komen dat het onder Linux ook gewoon moet gaan lukken.

[Johan van Dijk]

De cardreader in mijn laptop doet het anders prima. Met Linux zijn cardreaders dus wel mogelijk

[Pjotr]

De cardreader in mijn laptop doet het anders prima. Met Linux zijn cardreaders dus wel mogelijk

Bij mij ook. Zowel de ingebouwde kaartlezer in de flaptop, als de losse kaartlezer, werken meteen, uit-de-doos.

[lizardman]

Van mijn USB cardreader kan ik mij niet herinneren dat ie het ooit niet deed, en de ingebouwde cardreader in mijn laptop (sony vaio vgn n11s) doet het al sinds Feisty, en dan ook nog eens sneller dan in windows, hoe dat kan weet ik ook niet, maar je hoort mij niet klagen ;-)

[merijn]

Hoi,ik heb iets heel raars ondekt.
Mijn interne kaartlezer doet het toch wel met Linux na verbazend even het opnieuw getest te hebben.
Want ik ben toch op het volgende probleem gestuit.
Ik heb een 64mb sd kaartje getest in mijn kaartlezer en die pakt hij wel ineens gewoon.
Stop ik mijn 4gb sd kaartje in mijn kaartlezer,dan wordt deze ineens niet herkend.
Moet ik dan misschien ergens wat in een configuratiebestand veranderen en zo welke,om te veranderen dat het ook gewoon met mijn 4gb sdkaartje gaat werken?.

Alvast bedankt.