Webcam ????

[rkerklaan]

In het verleden kreeg ik mn webcam niet aan de praat en heb toen hulp gezocht via dit forum. Helaas is het niet gelukt, maar ik ben toen niet helemaal diep gegaan. Inmiddels een geheel nieuwe installatie van Ubuntu op de PC en ga ik het toch weer proberen.

Mn webcam is een sweex, geen verdere aanduiding bekend. . . . het lampje brand wel
In het programma "hardinfo" is hij niet terug te vinden in USB devices en in input devices
Canorma geeft: "could not connect to video device /dev/video0 please check connection
Hij zit direct op een USB aansluiting, niet via een Hub
easycam wil niet installeren, omdat hij Python2.4 glade mist, maar op mn systeem staat al wel pytron2.6?

Code: [Selecteer]

lsusb geeft

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 04a9:10a2 Canon, Inc. iP4200
Bus 001 Device 005: ID 177f:0060  
Bus 001 Device 004: ID 056a:0060 Wacom Co., Ltd
Bus 001 Device 003: ID 0402:5603 ALi Corp. USB 2.0 Q-tec Webcam 300
Bus 001 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

lsmod geeft

Module                  Size  Used by
nls_iso8859_1           3249  0
nls_cp437               4919  0
vfat                    8901  0
fat                    47767  1 vfat
usb_storage            39425  0
binfmt_misc             6587  1
joydev                  8708  0
usbhid                 36110  0
hid                    67032  1 usbhid
fbcon                  35102  71
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0
vgastate                8961  1 vga16fb
snd_ca0106             31531  3
snd_ac97_codec        100646  1 snd_ca0106
ac97_bus                1002  1 snd_ac97_codec
snd_pcm_oss            35308  0
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  4 snd_ca0106,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy           1338  0
snd_seq_oss            26726  0
snd_seq_midi            4557  0
snd_rawmidi            19056  2 snd_ca0106,snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd                    54148  15 snd_ca0106,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i915                  282354  2
drm_kms_helper         29297  1 i915
wacom                  21855  0
usblp                  10481  0
ppdev                   5259  0
drm                   162471  3 i915,drm_kms_helper
i2c_algo_bit            5028  1 i915
parport_pc             25962  1
intel_agp              24177  2 i915
agpgart                31724  2 drm,intel_agp
psmouse                63245  0
serio_raw               3978  0
soundcore               6620  1 snd
lp                      7028  0
snd_page_alloc          7076  2 snd_ca0106,snd_pcm
video                  17375  1 i915
output                  1871  1 video
parport                32635  3 ppdev,parport_pc,lp
r8169                  33884  0
mii                     4381  1 r8169

lspci geeft

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
04:01.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
en . . o ja . . mn ubuntu versie is 2.30.0  bouwdatum 31-03-2010

kan iemand me helpen ?

[schwarzproductions]

Heb je al cheese geïnstalleerd? Werkt je webcam daarmee?

Kun je in camorama een andere keuze maken dan /dev/video0 ?

[rkerklaan]

Zodra ik canorama op start krijg ik de foutmelding en start het verder niet op, dus ik kan geen andere device kiezen.

Als ik in synaptic op "cheese"zoek krijg ik:

     cheese
     cheese-common
     libcheese-gtk18
     libcheese-gtk-dev

moet ik die allemaal installeren ?

[Robertos]

Gewoon het pakket "cheese" selecteren en installeren, eventuele afhankelijkheden worden vanzelf aangegeven.

[Cumulus007]

Ubuntu 2.30.0 Wat is dat nu weer voor lariekoek.

Toepassingen -> Ubuntu softwarecentrum -> Zoek op "Cheese" -> Installeren. Start het en wacht in spanning op het moment dat je beeld ziet.

Wat is overigens de uitkomst van "dmesg"?

[rkerklaan]

cheese zegt ook "no device found"

en dmesg:

Code: [Selecteer]

[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.164072] CPU1: Intel(R) Core(TM)2 Duo CPU     E6750  @ 2.66GHz stepping 0b
[    0.164081] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.168016] Brought up 2 CPUs
[    0.168018] Total of 2 processors activated (10639.69 BogoMIPS).
[    0.168546] CPU0 attaching sched-domain:
[    0.168548]  domain 0: span 0-1 level MC
[    0.168550]   groups: 0 1
[    0.168555] CPU1 attaching sched-domain:
[    0.168557]  domain 0: span 0-1 level MC
[    0.168559]   groups: 1 0
[    0.168641] devtmpfs: initialized
[    0.168641] regulator: core version 0.5
[    0.168641] Time: 10:56:16  Date: 06/01/10
[    0.168641] NET: Registered protocol family 16
[    0.168641] Trying to unpack rootfs image as initramfs...
[    0.168641] EISA bus registered
[    0.168641] ACPI: bus type pci registered
[    0.168641] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.168641] PCI: Not using MMCONFIG.
[    0.168641] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
[    0.168641] PCI: Using configuration type 1 for base access
[    0.172076] bio: create slab <bio-0> at 0
[    0.172768] ACPI: EC: Look up EC in DSDT
[    0.175562] ACPI: Executed 1 blocks of module-level executable AML code
[    0.179426] ACPI: Interpreter enabled
[    0.179434] ACPI: (supports S0 S1 S4 S5)
[    0.179452] ACPI: Using IOAPIC for interrupt routing
[    0.179494] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.182794] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.182797] PCI: Using MMCONFIG for extended config space
[    0.188948] ACPI Warning: Incorrect checksum in table [OEMB] - 96, should be 8F (20090903/tbutils-314)
[    0.189737] ACPI: No dock devices found.
[    0.189990] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.190059] pci 0000:00:02.0: reg 10 32bit mmio: [0xfde80000-0xfdefffff]
[    0.190063] pci 0000:00:02.0: reg 14 io port: [0xbc00-0xbc07]
[    0.190066] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.190070] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfdd00000-0xfddfffff]
[    0.190154] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.190157] pci 0000:00:1c.0: PME# disabled
[    0.190214] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.190217] pci 0000:00:1c.1: PME# disabled
[    0.190259] pci 0000:00:1d.0: reg 20 io port: [0xb400-0xb41f]
[    0.190302] pci 0000:00:1d.1: reg 20 io port: [0xb480-0xb49f]
[    0.190343] pci 0000:00:1d.2: reg 20 io port: [0xb800-0xb81f]
[    0.190384] pci 0000:00:1d.3: reg 20 io port: [0xb880-0xb89f]
[    0.190431] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfde7bc00-0xfde7bfff]
[    0.190475] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.190479] pci 0000:00:1d.7: PME# disabled
[    0.190588] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.190594] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[    0.190597] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.190600] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)
[    0.190603] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0300 (mask 003f)
[    0.190639] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.190645] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[    0.190651] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[    0.190656] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[    0.190662] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[    0.190696] pci 0000:00:1f.2: reg 10 io port: [0xb080-0xb087]
[    0.190701] pci 0000:00:1f.2: reg 14 io port: [0xb000-0xb003]
[    0.190706] pci 0000:00:1f.2: reg 18 io port: [0xac00-0xac07]
[    0.190711] pci 0000:00:1f.2: reg 1c io port: [0xa880-0xa883]
[    0.190716] pci 0000:00:1f.2: reg 20 io port: [0xa800-0xa80f]
[    0.190735] pci 0000:00:1f.2: PME# supported from D3hot
[    0.190739] pci 0000:00:1f.2: PME# disabled
[    0.190782] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[    0.190836] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff]
[    0.190840] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[    0.190845] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfa000000-0xfcffffff]
[    0.190887] pci 0000:01:00.0: reg 10 io port: [0xc800-0xc8ff]
[    0.190906] pci 0000:01:00.0: reg 18 64bit mmio pref: [0xf9fff000-0xf9ffffff]
[    0.190919] pci 0000:01:00.0: reg 20 64bit mmio pref: [0xf9fe0000-0xf9feffff]
[    0.190926] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfdff0000-0xfdffffff]
[    0.190963] pci 0000:01:00.0: supports D1 D2
[    0.190965] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.190969] pci 0000:01:00.0: PME# disabled
[    0.191020] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
[    0.191023] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[    0.191028] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf9f00000-0xf9ffffff]
[    0.191059] pci 0000:04:01.0: reg 10 io port: [0xec00-0xec1f]
[    0.191101] pci 0000:04:01.0: supports D1 D2
[    0.191141] pci 0000:00:1e.0: transparent bridge
[    0.191145] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[    0.191162] pci_bus 0000:00: on NUMA node 0
[    0.191166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.191276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.191374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.191422] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[    0.194210] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.194302] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.194392] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.194482] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.194573] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.194663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.194754] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.194844] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.194928] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.194936] vgaarb: loaded
[    0.195035] SCSI subsystem initialized
[    0.195106] libata version 3.00 loaded.
[    0.195167] usbcore: registered new interface driver usbfs
[    0.195177] usbcore: registered new interface driver hub
[    0.195199] usbcore: registered new device driver usb
[    0.195297] ACPI: WMI: Mapper loaded
[    0.195298] PCI: Using ACPI for IRQ routing
[    0.195435] NetLabel: Initializing
[    0.195437] NetLabel:  domain hash size = 128
[    0.195438] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.195448] NetLabel:  unlabeled traffic allowed by default
[    0.195558] hpet clockevent registered
[    0.195561] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.195565] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.195569] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.200161] Switching to clocksource tsc
[    0.201779] AppArmor: AppArmor Filesystem Enabled
[    0.201790] pnp: PnP ACPI init
[    0.201802] ACPI: bus type pnp registered
[    0.205428] pnp: PnP ACPI: found 17 devices
[    0.205431] ACPI: ACPI bus type pnp unregistered
[    0.205434] PnPBIOS: Disabled by ACPI PNP
[    0.205444] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[    0.205451] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.205454] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.205456] system 00:08: ioport range 0x480-0x4bf has been reserved
[    0.205458] system 00:08: ioport range 0x900-0x90f has been reserved
[    0.205460] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.205463] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.205468] system 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
[    0.205472] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.205474] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.205479] system 00:0e: ioport range 0x290-0x29f has been reserved
[    0.205483] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[    0.205488] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[    0.205490] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[    0.205492] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[    0.205495] system 00:10: iomem range 0x100000-0x7f6fffff could not be reserved
[    0.240167] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.240171] pci 0000:00:1c.0:   IO window: 0xd000-0xdfff
[    0.240175] pci 0000:00:1c.0:   MEM window: 0xfe000000-0xfebfffff
[    0.240179] pci 0000:00:1c.0:   PREFETCH window: 0x000000fa000000-0x000000fcffffff
[    0.240184] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01
[    0.240187] pci 0000:00:1c.1:   IO window: 0xc000-0xcfff
[    0.240191] pci 0000:00:1c.1:   MEM window: 0xfdf00000-0xfdffffff
[    0.240194] pci 0000:00:1c.1:   PREFETCH window: 0x000000f9f00000-0x000000f9ffffff
[    0.240200] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[    0.240202] pci 0000:00:1e.0:   IO window: 0xe000-0xefff
[    0.240206] pci 0000:00:1e.0:   MEM window: disabled
[    0.240209] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.240225]   alloc irq_desc for 16 on node -1
[    0.240227]   alloc kstat_irqs on node -1
[    0.240233] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.240237] pci 0000:00:1c.0: setting latency timer to 64
[    0.240244]   alloc irq_desc for 17 on node -1
[    0.240245]   alloc kstat_irqs on node -1
[    0.240248] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.240251] pci 0000:00:1c.1: setting latency timer to 64
[    0.240257] pci 0000:00:1e.0: setting latency timer to 64
[    0.240261] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.240263] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.240265] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.240267] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfebfffff]
[    0.240269] pci_bus 0000:02: resource 2 pref mem [0xfa000000-0xfcffffff]
[    0.240271] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.240273] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff]
[    0.240275] pci_bus 0000:01: resource 2 pref mem [0xf9f00000-0xf9ffffff]
[    0.240277] pci_bus 0000:04: resource 0 io:  [0xe000-0xefff]
[    0.240279] pci_bus 0000:04: resource 3 io:  [0x00-0xffff]
[    0.240281] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[    0.240313] NET: Registered protocol family 2
[    0.240399] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.240651] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.241058] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.241260] TCP: Hash tables configured (established 131072 bind 65536)
[    0.241262] TCP reno registered
[    0.241325] NET: Registered protocol family 1
[    0.241340] pci 0000:00:02.0: Boot video device
[    0.241572] cpufreq-nforce2: No nForce2 chipset.
[    0.241594] Scanning for low memory corruption every 60 seconds
[    0.241682] audit: initializing netlink socket (disabled)
[    0.241690] type=2000 audit(1275389776.239:1): initialized
[    0.249263] highmem bounce pool size: 64 pages
[    0.249268] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.250427] VFS: Disk quotas dquot_6.5.2
[    0.250473] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.250919] fuse init (API version 7.13)
[    0.250983] msgmni has been set to 1690
[    0.251146] alg: No test for stdrng (krng)
[    0.251189] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.251192] io scheduler noop registered
[    0.251193] io scheduler anticipatory registered
[    0.251195] io scheduler deadline registered
[    0.251223] io scheduler cfq registered (default)
[    0.251330]   alloc irq_desc for 24 on node -1
[    0.251332]   alloc kstat_irqs on node -1
[    0.251340] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.251347] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.251444]   alloc irq_desc for 25 on node -1
[    0.251446]   alloc kstat_irqs on node -1
[    0.251451] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.251458] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.251526] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.251541] Firmware did not grant requested _OSC control
[    0.251555] Firmware did not grant requested _OSC control
[    0.251577] Firmware did not grant requested _OSC control

moderator edit: code tags toegevoegd. Dit kun je zelf doen door op het #-knopje te drukken

[rkerklaan]

en hier het vervolg, want het bericht overschreed de 2000 tekens

Code: [Selecteer]

[    0.251587] Firmware did not grant requested _OSC control
[    0.251598] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.251678] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.251681] ACPI: Power Button [PWRB]
[    0.251735] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.251737] ACPI: Power Button [PWRF]
[    0.252296] ACPI: SSDT 7f6c20f0 00235 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.252539] processor LNXCPU:00: registered as cooling_device0
[    0.252867] ACPI: SSDT 7f6c2330 00235 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
[    0.253096] processor LNXCPU:01: registered as cooling_device1
[    0.256141] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.256226] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.256309] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.256655] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.257458] brd: module loaded
[    0.257812] loop: module loaded
[    0.257869] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.257936] ata_piix 0000:00:1f.1: version 2.13
[    0.257947]   alloc irq_desc for 18 on node -1
[    0.257949]   alloc kstat_irqs on node -1
[    0.257953] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.257983] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.258052] scsi0 : ata_piix
[    0.258108] isapnp: Scanning for PnP cards...
[    0.307184] scsi1 : ata_piix
[    0.308207] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.308209] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.308237]   alloc irq_desc for 19 on node -1
[    0.308239]   alloc kstat_irqs on node -1
[    0.308245] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.308249] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.308282] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.314876] Freeing initrd memory: 7775k freed
[    0.317466] scsi2 : ata_piix
[    0.351933] scsi3 : ata_piix
[    0.353153] ata3: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xa800 irq 19
[    0.353156] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa808 irq 19
[    0.353430] Fixed MDIO Bus: probed
[    0.353458] PPP generic driver version 2.4.2
[    0.353520] tun: Universal TUN/TAP device driver, 1.6
[    0.353521] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.353600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.353621]   alloc irq_desc for 23 on node -1
[    0.353622]   alloc kstat_irqs on node -1
[    0.353629] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.353644] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.353647] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.353671] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.353687] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.353696] ehci_hcd 0000:00:1d.7: debug port 1
[    0.357594] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.357701] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfde7bc00
[    0.371802] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.371876] usb usb1: configuration #1 chosen from 1 choice
[    0.371898] hub 1-0:1.0: USB hub found
[    0.371904] hub 1-0:1.0: 8 ports detected
[    0.371956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.371966] uhci_hcd: USB Universal Host Controller Interface driver
[    0.372001] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.372006] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.372009] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.372031] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.372051] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b400
[    0.372117] usb usb2: configuration #1 chosen from 1 choice
[    0.372136] hub 2-0:1.0: USB hub found
[    0.372142] hub 2-0:1.0: 2 ports detected
[    0.372176] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.372181] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.372183] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.372210] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.372229] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b480
[    0.372297] usb usb3: configuration #1 chosen from 1 choice
[    0.372315] hub 3-0:1.0: USB hub found
[    0.372320] hub 3-0:1.0: 2 ports detected
[    0.372352] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.372357] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.372359] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.372381] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.372406] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b800
[    0.372473] usb usb4: configuration #1 chosen from 1 choice
[    0.372492] hub 4-0:1.0: USB hub found
[    0.372496] hub 4-0:1.0: 2 ports detected
[    0.372528] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.372532] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.372535] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.372561] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.372586] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b880
[    0.372649] usb usb5: configuration #1 chosen from 1 choice
[    0.372668] hub 5-0:1.0: USB hub found
[    0.372672] hub 5-0:1.0: 2 ports detected
[    0.372748] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[    0.372750] PNP: PS/2 controller doesn't have KBD irq; using default 1
[    0.375523] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.375528] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.375583] mice: PS/2 mouse device common for all mice
[    0.375666] rtc_cmos 00:03: RTC can wake from S4
[    0.375698] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.375719] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.375793] device-mapper: uevent: version 1.0.3
[    0.375869] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.375913] device-mapper: multipath: version 1.1.0 loaded
[    0.375915] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.375994] EISA: Probing bus 0 at eisa.0
[    0.376016] EISA: Detected 0 cards.
[    0.376069] cpuidle: using governor ladder
[    0.376070] cpuidle: using governor menu
[    0.376409] TCP cubic registered
[    0.376522] NET: Registered protocol family 10
[    0.376882] lo: Disabled Privacy Extensions
[    0.377134] NET: Registered protocol family 17
[    0.377554] Using IPI No-Shortcut mode
[    0.377605] PM: Resume from disk failed.
[    0.377615] registered taskstats version 1
[    0.377822]   Magic number: 14:24:931
[    0.377883] rtc_cmos 00:03: setting system clock to 2010-06-01 10:56:17 UTC (1275389777)
[    0.377886] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.377887] EDD information not available.
[    0.528390] ata3.00: ATA-6: ST3500320NS, SN04, max UDMA/133
[    0.528392] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.528419] ata3.01: ATAPI: HL-DT-ST BDDVDRW GGC-H20N, 1.01, max UDMA/133
[    0.544395] ata3.00: configured for UDMA/133
[    0.559989] ata3.01: configured for UDMA/133
[    0.622118] isapnp: No Plug & Play device found
[    0.622220] scsi 2:0:0:0: Direct-Access     ATA      ST3500320NS      SN04 PQ: 0 ANSI: 5
[    0.622312] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.622317] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    0.622347] sd 2:0:0:0: [sda] Write Protect is off
[    0.622349] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.622425] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.625977] scsi 2:0:1:0: CD-ROM            HL-DT-ST BDDVDRW GGC-H20N 1.01 PQ: 0 ANSI: 5
[    0.626003]  sda: sda1 sda2 <
[    0.636091] ata4.00: ATA-6: ST380013AS, 3.18, max UDMA/133
[    0.636093] ata4.00: 156301488 sectors, multi 16: LBA48
[    0.652109] ata4.00: configured for UDMA/133
[    0.652386]  sda5 >
[    0.661480] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.661482] Uniform CD-ROM driver Revision: 3.20
[    0.661536] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    0.661566] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    0.661633] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.661647] scsi 3:0:0:0: Direct-Access     ATA      ST380013AS       3.18 PQ: 0 ANSI: 5
[    0.661715] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.661726] sd 3:0:0:0: Attached scsi generic sg2 type 0
[    0.661748] sd 3:0:0:0: [sdb] Write Protect is off
[    0.661750] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.661768] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.661855]  sdb: sdb1
[    0.663931] sd 3:0:0:0: [sdb] Attached SCSI disk
[    0.663942] Freeing unused kernel memory: 656k freed
[    0.664205] Write protecting the kernel text: 4676k
[    0.664235] Write protecting the kernel read-only data: 1840k
[    0.676322] udev: starting version 151
[    0.703755] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    0.729298] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.729315] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.729351] r8169 0000:01:00.0: setting latency timer to 64
[    0.729394]   alloc irq_desc for 26 on node -1
[    0.729396]   alloc kstat_irqs on node -1
[    0.729408] r8169 0000:01:00.0: irq 26 for MSI/MSI-X
[    0.729911] eth0: RTL8168c/8111c at 0xf8064000, 00:25:22:0c:f5:c1, XID 1c4000c0 IRQ 26
[    0.837221] usb 1-2: configuration #1 chosen from 1 choice
[    0.837428] hub 1-2:1.0: USB hub found
[    0.837656] hub 1-2:1.0: 4 ports detected
[    0.947741] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    1.005799] kjournald starting.  Commit interval 5 seconds
[    1.005805] EXT3-fs: mounted filesystem with ordered data mode.
[    1.082988] usb 1-4: configuration #1 chosen from 1 choice
[    1.156052] usb 1-2.1: new low speed USB device using ehci_hcd and address 4
[    1.252362] usb 1-2.1: configuration #1 chosen from 1 choice
[    1.324312] usb 1-2.3: new low speed USB device using ehci_hcd and address 5
[    1.438984] usb 1-2.3: configuration #1 chosen from 1 choice
[    1.512316] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[    1.605872] usb 1-2.4: configuration #1 chosen from 1 choice
[   15.371849] udev: starting version 151
[   15.470825] Adding 6040400k swap on /dev/sda5.  Priority:-1 extents:1 across:6040400k
[   15.478986] Linux agpgart interface v0.103
[   15.498743] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[   15.499525] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[   15.546866] intel_rng: FWH not detected
[   15.547705] lp: driver loaded but no devices found
[   15.562503] input: Wacom Volito as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
[   15.573917] usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10A2
[   15.573933] usbcore: registered new interface driver usblp
[   15.574516] usbcore: registered new interface driver wacom
[   15.574519] wacom: v1.52:USB Wacom tablet driver
[   15.585609] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   15.585969] parport_pc 00:07: reported by Plug and Play ACPI
[   15.586017] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   15.610069] [drm] Initialized drm 1.1.0 20060810
[   15.620207] ppdev: user-space parallel port driver
[   15.628380] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.628385] i915 0000:00:02.0: setting latency timer to 64
[   15.631482]   alloc irq_desc for 27 on node -1
[   15.631485]   alloc kstat_irqs on node -1
[   15.631493] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[   15.631499] [drm] set up 7M of stolen space
[   15.631992] [drm] initialized overlay support
[   15.679287] type=1505 audit(1275389792.798:2):  operation="profile_load" pid=639 name="/sbin/dhclient3"
[   15.679803] type=1505 audit(1275389792.798:3):  operation="profile_load" pid=639 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   15.680080] type=1505 audit(1275389792.802:4):  operation="profile_load" pid=639 name="/usr/lib/connman/scripts/dhclient-script"
[   15.680175] lp0: using parport0 (interrupt-driven).
[   15.717711]   alloc irq_desc for 22 on node -1
[   15.717714]   alloc kstat_irqs on node -1
[   15.717719] CA0106 0000:04:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   15.717741] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[   15.741159] psmouse serio1: ID: 10 00 64
[   15.795302] fb0: inteldrmfb frame buffer device
[   15.795304] registered panic notifier
[   15.795818] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   15.801783] vga16fb: initializing
[   15.801785] vga16fb: mapped to 0xc00a0000
[   15.801788] vga16fb: not registering due to another framebuffer present
[   15.804194] usbcore: registered new interface driver hiddev
[   15.813444] input: Sweex keyboard Sweex USB keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.3/1-2.3:1.0/input/input4
[   15.813525] generic-usb 0003:177F:0060.0001: input,hidraw0: USB HID v1.10 Keyboard [Sweex keyboard Sweex USB keyboard] on usb-0000:00:1d.7-2.3/input0
[   15.831059] input: Sweex keyboard Sweex USB keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.3/1-2.3:1.1/input/input5
[   15.831144] generic-usb 0003:177F:0060.0002: input,hidraw1: USB HID v1.10 Device [Sweex keyboard Sweex USB keyboard] on usb-0000:00:1d.7-2.3/input1
[   15.831167] usbcore: registered new interface driver usbhid
[   15.831169] usbhid: v2.6:USB HID core driver
[   15.908144] Console: switching to colour frame buffer device 180x56
[   16.070612] EXT3 FS on sda1, internal journal
[   16.339544] type=1505 audit(1275389793.458:5):  operation="profile_load" pid=854 name="/usr/share/gdm/guest-session/Xsession"
[   16.340919] type=1505 audit(1275389793.462:6):  operation="profile_replace" pid=855 name="/sbin/dhclient3"
[   16.341443] type=1505 audit(1275389793.462:7):  operation="profile_replace" pid=855 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   16.341802] type=1505 audit(1275389793.462:8):  operation="profile_replace" pid=855 name="/usr/lib/connman/scripts/dhclient-script"
[   16.344673] type=1505 audit(1275389793.466:9):  operation="profile_load" pid=862 name="/usr/bin/evince"
[   16.345268] r8169: eth0: link up
[   16.345273] r8169: eth0: link up
[   16.352058] type=1505 audit(1275389793.474:10):  operation="profile_load" pid=862 name="/usr/bin/evince-previewer"
[   16.358774] type=1505 audit(1275389793.478:11):  operation="profile_load" pid=862 name="/usr/bin/evince-thumbnailer"
[   16.397293] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[   16.462625] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[   16.462627] apm: disabled - APM is not SMP safe.
[   16.808759] usb 1-2.4: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[   17.006645] CPU0 attaching NULL sched-domain.
[   17.006649] CPU1 attaching NULL sched-domain.
[   17.036053] CPU0 attaching sched-domain:
[   17.036056]  domain 0: span 0-1 level MC
[   17.036059]   groups: 0 1
[   17.036063] CPU1 attaching sched-domain:
[   17.036065]  domain 0: span 0-1 level MC
[   17.036067]   groups: 1 0
[   18.679898] CPU0 attaching NULL sched-domain.
[   18.679903] CPU1 attaching NULL sched-domain.
[   18.701293] CPU0 attaching sched-domain:
[   18.701297]  domain 0: span 0-1 level MC
[   18.701299]   groups: 0 1
[   18.701304] CPU1 attaching sched-domain:
[   18.701306]  domain 0: span 0-1 level MC
[   18.701308]   groups: 1 0
[   26.792004] eth0: no IPv6 routers present

code tags

[Carharttguy]

Eerst en vooral, gelieve code tags te gebruiken bij grote lappen tekst, dan krijg je scrolbalkjes.

Om op je probleem in te gaan, probeer toch echt wel een type te vinden van je webcam, en nummer of een naam, dat kan veel helpen. Kijk anders eens op google afbeeldingen, zoek op sweex webcam, als je jouwe ziet staan, staat het type er misschien bij.

Hier staan al wat drivers voor Sweex apparaten: http://list.driverguide.com/list/LINUX/company1706/index.html

[rkerklaan]

Aan de hand van afbeeldingen lijkt het me de Sweex WC 050. Zou ook de JA000020 of JA000040 kunnen zijn, maar die voetjes hebben een andere kleur en WC 050 laat wel ee nbelletje ringelen.

vervolgens ben ik gaan zoeken op de site van die link en voor Linux zie ik alleen een JA000020 driver, maar het zijn nagenoeg de zelfde cams, dus het proberen waard.

Blijkt het een .exe te zijn . . . moet ik hem dan installeren via WINE of is het dan toch geen linux-driver ?

[Cumulus007]

Aan de hand van afbeeldingen lijkt het me de Sweex WC 050. Zou ook de JA000020 of JA000040 kunnen zijn, maar die voetjes hebben een andere kleur en WC 050 laat wel ee nbelletje ringelen.

vervolgens ben ik gaan zoeken op de site van die link en voor Linux zie ik alleen een JA000020 driver, maar het zijn nagenoeg de zelfde cams, dus het proberen waard.

Blijkt het een .exe te zijn . . . moet ik hem dan installeren via WINE of is het dan toch geen linux-driver ?

Dat is een verloren zaak, Windows-stuurprogramma's werken niet met Wine.

In de dmesg-uitvoer kan ik niets terugvinden over je webcam. Ik vrees dat er totaal geen Linux-ondersteuning is voor deze webcam.  Ik raad je aan in het vervolg niet de allergoedkoopste webcam meer te kopen

[rkerklaan]

Grrrrr .  .  . das nou een tegenvaller zeg.

Code: [Selecteer]

Nou dan dit bericht maar eens gebruiken om te zien of het me lukt met die code-tags en om jullie allemaal natuurlijk te bedanken voor het mee denken, want dit moet gezegd worden: Ubuntero's zijn hele hulpvaardige mensen die echt proberen om een ander goed te helpen . . .bedankt hoor.

[mrGee]

Hallo

In je eerste lsusb duikt dit op;
0402:5603 ALi Corp. USB 2.0 Q-tec Webcam 300
als je daar op zoekt, zie je dat hij evt. aan de praat is te brengen met de m560x driver.

Maarrrrr, het ding is erg slecht ondersteund, met wisselende resultaten, driver is nog steeds in
staat van development. Daarbij moet je vrij moeizaam ongeveer volgens deze handleiding;

http://ubuntuforums.org/showpost.php?p=5055135&postcount=6
(alleen moet je daar de m5603c-gspca invullen achter branches)

Zelf gaan compilen en volgens een klein  stukje uit hun README_INSTALLATION;

Code: [Selecteer]

INSTALLATION OVERVIEW
=====================

This driver is a subdriver for the gspcav2 project.
It cannot work without gspvav2.

-download v4l-dvb, the project contains gspcav2.
-add m5603c subdriver source.
-compile/install minimal kernel modules for your running kernel
-extract from your windows driver the microcode and install it
 C10H0110.bin,S10H0110.csr
-load kernel modules
-compile support v4l2 libraries

Test!


INSTALLATION DETAILS
====================
1) Since the v4l-dvb move to GIT, it is impossible to do simple things,
    like compilation of a single module (at lest for me). Hopefully, a
    backport (V4L/DVB backports repository) of v4l-dvb is generated.
    From the page:
    http://www.linuxtv.org/hg
    download 'v4l-dvb.gz',untar them in the same subdirectory.

2) Add the m5603c subdriver to v4l-dvb tree.

    move to./v4l-dvb/linux/driver/media/video/gspca

    create m5603c and copy all files from subdriver in it.
    Edit Makefile to reference m5603c
obj-$(CONFIG_USB_M5602)         += m5602/
    ++> obj-$(CONFIG_USB_M5603C)        += m5603c/ <++

    Edit Kconfig same way
source "drivers/media/video/gspca/m5602/Kconfig"
    ++> source "drivers/media/video/gspca/m5603c/Kconfig"  <++

3) Compile minimal source from v4l-dvb; 300 modules, 5 required!
    Deselect everything except gspca/m5603c
    cd ./v4l-dvb/v4l
    make menuconfig
    Since a lot of modules are still compiled, you can edit .config
    to remove them (see .config in appendix)

    cd ./v4l-dvb
    make
    make install

    List of kernel modules files installed:
    in /lib/modules/${KVERS}/kernel/drivers/media/video/
gspca/gspca_main.ko
gspca/m5603c/gspca_m5603c.ko
v4l2-common.ko
v4l2-int-device.ko
videodev.ko

    plus some useless firmware

4) You must install the support files from your webcam window driver
    in the /lib/firmware directory.

    You can find them in your windows installation.
    They are usually named
    C10F0110.bin
    C10H0110.bin *
    S10F0110.csr
    S10H0110.csr *

    * H:high usb2 speed, required
      F:low speed usb1 not required

    c:\Windows\Options\Install
    is a good place to look at first.

    The kernel module have options to specify the filenames.
    See "man modprobe", option -C for details
    Options are:

    modprobe gspca_m5603c csr_filename=foo1 bin_filename=foo2

    The sourceforge repository have some .bin and .csr that
    you can try. See in firmware dir.

5)  v4l-dvb use apps preparation:

    Now load newly installed modules.
    depmod -a
    modprobe videodev
    modprobe gspca_main
    modprobe gspca_m5603c #debug=X csr_filename=foo1 bin_filename=foo2

    Watch kernel log at each step.
Linux video capture interface: v2.00
kernel: gspca: main v2.9.0 registered
kernel: gspca: probing 0402:5603
kernel: m5603c: ALi m5603c is USB v2
kernel: m5603c: Bridge ALi m5603c already initialized!
kernel: gspca: video0 created
kernel: usbcore: registered new interface driver ALi m5603c
kernel: m5603c: ALi m5603c bridge v1.0.2 registered
kernel: usb 1-6: firmware: requesting S10H0110.csr
kernel: m5603c: Section DSP_INIT, (size 8571) found
kernel: m5603c: Section AP_ON, (size 674) found
kernel: m5603c: Section AP_OFF, (size 592) found
kernel: m5603c: Detected Sensor SENSOR_7648_V14


6) Test using the utility pixfmt-test

    git clone git://linuxtv.org/v4l-utils.git v4l-utils
    cd v4l-utils/lib
    make
    make install PREFIX=/usr

    cd v4l-utils/contrib/test
    make
    ./pixfmt-test
    launch an 'xconsole&' before, to see logs.

TODO
====

Discover ALi m5603c chip to really use it ;-)
For now, it is just another stupid chip totally
under-used giving a poor image of its creator...
ALi, you provide a bad image, in all sense ;-)

Add video control (color, hue, blacklevel, ...)
if possible from sensor datasheets.

Add VFLIP/HFLIP for mt9v011 mt9v111.

Better understand/use/simplify each sensor 'clocktables'

Some other sensors are nearly ok to be added. The bridge
code lists them. If you have this duo (M5603c+sensor listed)
tell me.


BUGS
====

"ekiga" alone use a big video buffer and segfault.
"LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so ekiga" is fine.

Lots of other imaging tools need the v4l1compat preload hack.
This will probably be fixed in the future.


ook nog wat andere pakketten bij installeren, kortom voor een goedkoop sweexje
lijkt me zelfs het intikken van deze tekst al niet de moeite waard. Of je moet het
als een echte uitdaging zien en aansluitend een nette wiki gaan schrijven als de actie
evt. lukt 

Groeten Gerrit

[rkerklaan]

Uuuhm . . . . Ik denk dat ik dit soort dingen ooit nog wel een uitdaging ga vinden, maar nu is het even een hele hoge drempel.

Ik bewaar deze info wel ,al vast bedankt. . . .als ik in augustus weer fris terug ben van vakantie heb ik weer een berg energie en durf ik wel zoń uitdaging aan te gaan. Het gaat immers niet alleen om de centen, maar ook principes :0 .