Nieuws:

Welkom, Gast. Alsjeblieft inloggen of registreren.
Heb je de activerings-mail niet ontvangen?

Auteur Topic: Schermresolutie  (gelezen 2558 keer)

Schermresolutie
« Gepost op: 2012/03/15, 21:12:45 »
Beste mede-ubuntugebruikers,

Net Ubuntu geinstalleerd samen met windows XP via dualboot. Gaat prima, alleen als ik ubuntu opstart krijg ik geen iconen of werkbalken te zien. Als ik het zo kan bekijken dan is mijn schermresolutie veel te groot. Heeft iemand enig idee hoe ik deze kan aanpassen? Ik kan nu namelijk niets aanklikken.

Re: Schermresolutie
« Reactie #1 Gepost op: 2012/03/15, 21:16:03 »
Om welke Ubuntu gaat het, wat voor scherm en videokaart heb je?

Re: Schermresolutie
« Reactie #2 Gepost op: 2012/03/15, 21:19:22 »
Druk eens op de Windows-knop op je toetsenbord, en typ eens wat. Gebeurd er dan iets?

Re: Schermresolutie
« Reactie #3 Gepost op: 2012/03/15, 21:24:55 »
Ik heb een scherm van 22 inch. Net de nieuwste versie van Ubuntu geinstalleerd. Voor zover ik weet heb ik een videokaart die al vrij gedateerd is, 32 MB geheugen.

Re: Schermresolutie
« Reactie #4 Gepost op: 2012/03/15, 21:26:44 »
Ik heb een scherm van 22 inch. Net de nieuwste versie van Ubuntu geinstalleerd. Voor zover ik weet heb ik een videokaart die al vrij gedateerd is, 32 MB geheugen.
Dat zegt helemaal niets, heb je een merknaam en productnaam?

Heeft je videokaart 32 MB VRAM? Dat is echt heel weinig, ik vraag me af of je Ubuntu 11.10 daar ooit op zult kunnen draaien.

Re: Schermresolutie
« Reactie #5 Gepost op: 2012/03/15, 21:43:46 »
Ik moet je zeggen, het is me gelukt om ubuntu volledig op te starten. Het enige waar ik nu mee zit is dat de ingestelde resolutie te groot is, maar dat ik deze ook niet kan aanpassen, hij herkent mijn scherm als het ware niet. Ik kan nu alleen maar 800x600 kiezen, tja, erg groot moet ik zeggen. Ik ben nu dus zo ver dat ik gewoon werkbalken en pictogrammen heb. De naam van de videokaart is volgens mij Maxtor.

Re: Schermresolutie
« Reactie #6 Gepost op: 2012/03/15, 21:48:19 »
Ik heb een scherm van 22 inch. Net de nieuwste versie van Ubuntu geinstalleerd. Voor zover ik weet heb ik een videokaart die al vrij gedateerd is, 32 MB geheugen.
Dat zegt helemaal niets, heb je een merknaam en productnaam?

Heeft je videokaart 32 MB VRAM? Dat is echt heel weinig, ik vraag me af of je Ubuntu 11.10 daar ooit op zult kunnen draaien.

Mijn leraar cloud computing heeft Ubuntu 11.10 draaien op een laptop van 10 jaar oud. Unity en al en draait prima en die videokaart is 32 of 64 MB, dus 32 MB is voldoende.

Re: Schermresolutie
« Reactie #7 Gepost op: 2012/03/15, 22:50:57 »
Ik moet je zeggen, het is me gelukt om ubuntu volledig op te starten. Het enige waar ik nu mee zit is dat de ingestelde resolutie te groot is, maar dat ik deze ook niet kan aanpassen, hij herkent mijn scherm als het ware niet. Ik kan nu alleen maar 800x600 kiezen, tja, erg groot moet ik zeggen. Ik ben nu dus zo ver dat ik gewoon werkbalken en pictogrammen heb. De naam van de videokaart is volgens mij Maxtor.
Ik denk dat je je videokaart zult moeten upgraden om met Ubuntu te kunnen werken. Volgens mij zijn die Linux-drivers niet zo super.

Een scherm van 22 inch heeft waarschijnlijk een full hd-resolutie. Ik twijfel of zo'n oude videokaart dat wel aankan.

Offline asphyxia

  • Forumteam
Re: Schermresolutie
« Reactie #8 Gepost op: 2012/03/15, 23:10:58 »
Beste ubuntuutje,

Als je bij de terminal kan, geef daar dan eens het commando lspci -vvv (l=kleine letter L, anders copy/paste). Daarin staan de gegevens van je graphical controller, en de driver die geinstalleerd is. Kan je dat gedeelte hier eens posten?
Als de werkelijkheid er niet was, zou de wereld er heel anders uitzien. [Theo Maassen]
Alles is te kraken, niets is veilig, zorg dus voor zoveel mogelijk niets. [Ramana]

Offline aartje

  • Lid
Re: Schermresolutie
« Reactie #9 Gepost op: 2012/03/16, 07:50:22 »
Hier wordt weer een vraag gesteld zonder enige nadere gegevens
Zoiets inde trant van "Mijn schermresolutie is niet juist, help...."
Wat meer gegevens doet wonderen, welke Ubuntu ? Welke videokaart ?

etc.etc.

Trouwens met een Nvidia Geforce 2MX 32 Mb kan je prima Ubuntu draaien,
maar het blijft gissen of het die kaart is.......

Re: Schermresolutie
« Reactie #10 Gepost op: 2012/03/16, 11:52:22 »
Ik zal zo gauw ik tijd heb het even opzoeken.

Re: Schermresolutie
« Reactie #11 Gepost op: 2012/03/16, 13:57:01 »
Ik heb Ubuntu 10.04.4 LTS geinstalleerd. Uit mijn commando lspci -vvv kwam het volgende:

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)
   Subsystem: Matrox Graphics, Inc. Device 0f84
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M]
   Region 1: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
   Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
   Expansion ROM at feac0000 [disabled] [size=128K]
   Capabilities: <access denied>
   Kernel modules: matroxfb_base

ubuntu@ubuntu:~$ lspci -vvv
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: ASRock Incorporation Device 0314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp

00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: ASRock Incorporation Device 1314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: ASRock Incorporation Device 2314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: via-agp

00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: ASRock Incorporation Device 4314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: ASRock Incorporation Device 7314
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fda00000-feafffff
Prefetchable memory behind bridge: f3f00000-f7efffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at b800 [size=256]
Region 1: Memory at febff400 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
Subsystem: ASRock Incorporation Device 3149
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: I/O ports at d800 [size=256]
Capabilities: <access denied>
Kernel driver in use: sata_via
Kernel modules: sata_via

00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device 0571
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
Kernel modules: pata_via

00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASRock Incorporation Device 3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASRock Incorporation Device 3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at c400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASRock Incorporation Device 3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
Subsystem: ASRock Incorporation Device 3038
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20)
Subsystem: ASRock Incorporation Device 3104
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
Subsystem: ASRock Incorporation Device 3227
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
Subsystem: ASRock Incorporation Device 9761
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at d000 [size=256]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx

00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
Subsystem: ASRock Incorporation Device 3065
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
Kernel modules: via-rhine

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G550 AGP (rev 01)
Subsystem: Matrox Graphics, Inc. Device 0f84
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: matroxfb_base

Excuses voor de wat grote letters tussendoor. Mijn videokaart is dus een Matrox.


[Mod edit: graphical controller info apart gezet, rest info in code-tags. Bij grote 'lappen' tekst is dat aan te bevelen, dat kan met de button met het '#' -teken]
« Laatst bewerkt op: 2012/03/16, 14:20:15 door asphyxia »

Offline asphyxia

  • Forumteam
Re: Schermresolutie
« Reactie #12 Gepost op: 2012/03/16, 20:52:50 »
Ik heb wat gevonden, het lijkt een wat duister probleem te zijn met drivers.
Lees dit eens door: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-mga/+bug/572550

Bij post #19 (van Davide Saurino) vindt je dit:

same issue for me, the only stable solution that I've found to get working panels through different login was to remove compiz.

So, I run
sudo aptitude remove compiz compiz-core

After that, panel works fine.

Furthermore, if you want to really use compiz on this hardware you can reinstall it and from now on everything it's ok.

PS: I've not run a dpkg-reconfigure on compiz packages, possibly it should be enough.


Probeer dat eens, werkt dat voor je?
Als de werkelijkheid er niet was, zou de wereld er heel anders uitzien. [Theo Maassen]
Alles is te kraken, niets is veilig, zorg dus voor zoveel mogelijk niets. [Ramana]

Offline aartje

  • Lid
Re: Schermresolutie
« Reactie #13 Gepost op: 2012/03/17, 10:02:55 »
Ik heb geen idee of het volgende ook voor 10.04 helpt:

(uit http://ubuntuforums.org/archive/index.php/t-1385982.html )
=============================================================================

I'm a NUBE to Linux. I built a computer out of spare parts to try Ubuntu
I used a Matrox G550 Video card. The problem is that when I installed Ubuntu 9.1 the system sees the card but resolution is limited to 800 x 600

I downloaded a driver from Matrox (matrox_driver-x86_32-4.4.0.tar.gz) How do I install it?

Just as a note - I am using this card with a single VGA monitor (it's what I had available) I do not need DVI or Dual configurations just better resolution

I'm using that card on a desktop system running Hardy. You're probably already using the appropriate driver, you can check with:

grep mga /var/log/Xorg.0.log

which should show that the module is loaded already. If not, it may be that the driver isn't installed in which case use synaptic (or other package manager) to install xserver-xorg-video-mga.

The resolution problem is probably caused by the card failing to detect monitor modes and making pessimistic assumptions about available resolutions. You can add some modes to the file /etc/X11/xorg.conf (the file may not exist, create it if not), something like:

Section "Device"
Identifier "Matrox Graphics, Inc. MGA G550 AGP"
Driver "mga"
BusID "PCI:1:0:0"
Option "OldDmaInit" "True"
EndSection

Section "Monitor"
Identifier "Your_monitor"
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Matrox Graphics, Inc. MGA G550 AGP"
Monitor "Your_monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

The BusID entry may differ on your system, use `sudo lspci` to check the right values. Of course Hardy isn't Karmic and you may have some other Karmic specific problem ;)
=========================================================================

Ik heb alleen eens met een Matrox MGA G450 PCI 32MB gespeeld en gemerkt dat
het wel werkte maar niet de resolutie die ik wou.
« Laatst bewerkt op: 2012/03/18, 09:13:01 door aartje »

Offline EJ-Sulman

  • Lid
Re: Schermresolutie
« Reactie #14 Gepost op: 2012/03/22, 21:32:23 »
Wat je ook zou kunnen proberen is om in de bootloader op te starten in de recovery modus.
Dan heb je de keuze om je X-config te wijzigen of te resetten naar standaard VESA ondersteuning.

Groeten,
Ernst-Jan