Alle problemen liggen aan IRQ 10
Hier heb ik niet zoveel verstand van
Maar als iemand me ergens naar kan doorverwijzen?!
Ik zal even posten wat ik heb gevonden i.v.m. IRQ 10:
(lspci -v)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
Subsystem: Acer Incorporated [ALI]: Unknown device 0066
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1860 [size=32]
^^ Ik denk 1 van de USB-poorten ? ik heb ze niet allemaal getest, maar misschien zou ik dat eens moeten doen
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
Subsystem: Acer Incorporated [ALI]: Unknown device 0066
Flags: bus master, medium devsel, latency 0, IRQ 10
I/O ports at 1c00 [size=256]
I/O ports at 1880 [size=64]
Memory at b0000800 (32-bit, non-prefetchable) [size=512]
Memory at b0000400 (32-bit, non-prefetchable) [size=256]
^^ Geluid werkt niet!
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI]: Unknown device 0066
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at c0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 3000 [size=256]
Memory at b0100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at b0120000 [disabled] [size=128K]
^^ ATI grafische kaart, nog niet geconfigureerd
0000:06:08.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
Subsystem: Acer Incorporated [ALI]: Unknown device 0066
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
Memory at b0200000 (32-bit, non-prefetchable) [size=64K]
^^ Netwerkkaart die met tg3 zou moeten werken, maar deze werkt dus niet
- - - - - - - - - - - - - - - - - - - -
(dmesg)
[4294680.920000] eth1: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:c0:9f:c8:6d:f8
[4294680.921000] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
[4294680.921000] eth1: dma_rwctrl[763f0000]
[4294681.963000] irq 10: nobody cared (try booting with the "irqpoll" option)
[4294681.963000] [<4013e1f2>] __report_bad_irq+0x22/0x80
[4294681.963000] [<4013e2e8>] note_interrupt+0x68/0xc0
[4294681.963000] [<4013dbac>] __do_IRQ+0xbc/0xe0
[4294681.963000] [<4010597a>] do_IRQ+0x1a/0x30
[4294681.963000] [<401040ea>] common_interrupt+0x1a/0x20
[4294681.963000] [<40120e50>] __do_softirq+0x30/0xb0
[4294681.963000] [<40120f05>] do_softirq+0x35/0x40
[4294681.963000] [<40120fb5>] irq_exit+0x35/0x40
[4294681.963000] [<4010597f>] do_IRQ+0x1f/0x30
[4294681.963000] [<401040ea>] common_interrupt+0x1a/0x20
[4294681.963000] handlers:
[4294681.963000] [<808b9330>] (usb_hcd_irq+0x0/0x60 [usbcore])
[4294681.963000] [<80a14810>] (snd_intel8x0_interrupt+0x0/0x2a0 [snd_intel8x0])
[4294681.963000] Disabling IRQ #10
- - - - - - - - - - - - - - - - - - - -
Enige suggesties ??
