Nog enkele log files die mss handig kunnen zijn voor de experts onder ons:
output dmesg
ubuntu@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 MEDION ) @ 0x00000000000f7fc0
[ 0.000000] ACPI: RSDT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee3040
[ 0.000000 ] ACPI: FADT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee30c0
[ 0.000000] ACPI: BOOT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9280
[ 0.000000] ACPI: SLIC (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9400
[ 0.000000] ACPI: MCFG (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee95c0
[ 0.000000] ACPI: MADT (v001 MEDION MEDIONAG 0x42302e31 AWRD 0x00000000) @ 0x000000003fee9300
[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x000000003fee9640
[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20040311) @ 0x000000003fee9ad0
[ 0.000000] ACPI: DSDT (v001 MEDION AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fee0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 261856) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fee0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 261856
[ 0.000000] On node 0 totalpages: 261759
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1100 pages reserved
[ 0.000000] DMA zone: 2843 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254236 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000 ] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, address 0xfecc0000, GSI 24-47
[ 0.000000 ] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 257079
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 23.530656] Console: colour VGA+ 80x25
[ 23.531923] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 23.532628] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 23.532702] Checking aperture...
[ 23.532715] Calgary: detecting Calgary via BIOS EBDA area
[ 23.532716] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 23.555513] Memory: 1019348k/1047424k available (2217k kernel code, 27688k reserved, 1162k data, 304k init)
[ 23.635181] Calibrating delay using timer specific routine.. 4258.82 BogoMIPS (lpj=8517659)
[ 23.635244 ] Security Framework v1.0.0 initialized
[ 23.635254] SELinux: Disabled at boot.
[ 23.635282] Mount-cache hash table entries: 256
[ 23.635470] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 23.635472] CPU: L2 cache: 2048K
[ 23.635475] CPU 0/0 -> Node 0
[ 23.635477] using mwait in idle threads.
[ 23.635478] CPU: Physical Processor ID: 0
[ 23.635479] CPU: Processor Core ID: 0
[ 23.635488] CPU0: Thermal monitoring enabled (TM2)
[ 23.635502] SMP alternatives: switching to UP code
[ 23.635898] Early unpacking initramfs... done
[ 23.957734] ACPI: Core revision 20060707
[ 23.961839] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 24.006040] Using local APIC timer interrupts.
[ 24.053015] result 16625419
[ 24.053017] Detected 16.625 MHz APIC timer.
[ 24.055208] SMP alternatives: switching to SMP code
[ 24.055415] Booting processor 1/2 APIC 0x1
[ 24.066229] Initializing CPU#1
[ 24.142991] Calibrating delay using timer specific routine.. 4256.32 BogoMIPS (lpj=8512640)
[ 24.142997] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.142999] CPU: L2 cache: 2048K
[ 24.143001] CPU 1/1 -> Node 0
[ 24.143003] CPU: Physical Processor ID: 0
[ 24.143004] CPU: Processor Core ID: 1
[ 24.143009] CPU1: Thermal monitoring enabled (TM2)
[ 24.143285] Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02
[ 24.147002] CPU 1: Syncing TSC to CPU 0.
[ 24.147102] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 536 cycles)
[ 24.147122] Brought up 2 CPUs
[ 24.147182] Disabling vsyscall due to use of PM timer
[ 24.147184] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
[ 24.147186] time.c: Detected 2128.054 MHz processor.
[ 24.186899] migration_cost=52
[ 24.187238] Time: 17:04:35 Date: 04/17/107
[ 24.187268] NET: Registered protocol family 16
[ 24.187337] ACPI: bus type pci registered
[ 24.187345] PCI: Using configuration type 1
[ 24.187347] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 24.187349] mtrr: probably your BIOS does not setup all CPUs.
[ 24.187350] mtrr: corrected configuration.
[ 24.197831] ACPI: Interpreter enabled
[ 24.197833] ACPI: Using IOAPIC for interrupt routing
[ 24.198500 ] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.198504] PCI: Probing PCI hardware (bus 00)
[ 24.199993] Boot video device is 0000:02:00.0
[ 24.200654] PCI: Transparent bridge - 0000:00:13.1
[ 24.200716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.273656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[ 24.274243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 24.274925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[ 24.275278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE5C._PRT]
[ 24.275861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE.PE6C._PRT]
[ 24.276582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 24.277051] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 24.277402] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 24.277756] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 24.278111] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[ 24.278432] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 24.278745] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 24.279061] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 24.279384] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *5
[ 24.281907] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.281919] pnp: PnP ACPI init
[ 24.287101] pnp: PnP ACPI: found 17 devices
[ 24.287153] PCI: Using ACPI for IRQ routing
[ 24.287155] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.287280] NET: Registered protocol family 8
[ 24.287281] NET: Registered protocol family 20
[ 24.287306] PCI-GART: No AMD northbridge found.
[ 24.287805] pnp: 00:01: ioport range 0x400-0x47f could not be reserved
[ 24.287807] pnp: 00:01: ioport range 0x500-0x50f has been reserved
[ 24.288093] PCI: Bridge: 0000:00:01.0
[ 24.288096] IO window: b000-bfff
[ 24.288100] MEM window: dfd00000-dfdfffff
[ 24.288104 ] PREFETCH window: dfc00000-dfcfffff
[ 24.288111] PCI: Bridge: 0000:00:02.0
[ 24.288113] IO window: a000-afff
[ 24.288118] MEM window: dc000000-deffffff
[ 24.288122] PREFETCH window: c0000000-cfffffff
[ 24.288126] PCI: Bridge: 0000:00:03.0
[ 24.288129] IO window: c000-cfff
[ 24.288134] MEM window: dfb00000-dfbfffff
[ 24.288138] PREFETCH window: dfe00000-dfefffff
[ 24.288144] PCI: Bridge: 0000:04: 00.0
[ 24.288146] IO window: 9000-9fff
[ 24.288151] MEM window: df800000-df8fffff
[ 24.288155] PREFETCH window: df700000-df7fffff
[ 24.288159] PCI: Bridge: 0000:04:00.1
[ 24.288161] IO window: 8000-8fff
[ 24.288166] MEM window: df900000-df9fffff
[ 24.288170] PREFETCH window: df600000-df6fffff
[ 24.288174] PCI: Bridge: 0000:00:13.0
[ 24.288176] IO window: 8000-9fff
[ 24.288181] MEM window: df800000-dfafffff
[ 24.288185] PREFETCH window: df600000-df7fffff
[ 24.288189] PCI: Bridge: 0000:00:13.1
[ 24.288192] IO window: 7000-7fff
[ 24.288196] MEM window: df500000-df5fffff
[ 24.288200] PREFETCH window: df400000-df4fffff
[ 24.288217] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 24.288233] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[ 24.288238] PCI: Setting latency timer of device 0000:00: 02.0 to 64
[ 24.288253] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
[ 24.288258] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 24.288266] PCI: Setting latency timer of device 0000:00: 13.0 to 64
[ 24.288280] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 24.288284] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 24.288297] ACPI: PCI Interrupt 0000:04: 00.1[C] -> GSI 22 (level, low) -> IRQ 22
[ 24.288302] PCI: Setting latency timer of device 0000:04:00.1 to 64
[ 24.288309] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 24.288347] NET: Registered protocol family 2
[ 24.331221] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 24.331360] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 24.332876] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 24.334795] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.334798] TCP reno registered
[ 24.343442] checking if image is initramfs... it is
[ 24.967451] Freeing initrd memory: 7265k freed
[ 24.971637] Simple Boot Flag at 0x34 set to 0x80
[ 24.972200] audit: initializing netlink socket (disabled)
[ 24.972222] audit(1179421475.400:1): initialized
[ 24.972413] VFS: Disk quotas dquot_6.5.1
[ 24.972435] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 24.972495] io scheduler noop registered
[ 24.972497] io scheduler anticipatory registered
[ 24.972499] io scheduler deadline registered
[ 24.972510] io scheduler cfq registered (default)
[ 24.972835] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.972876] assign_interrupt_mode Found MSI capability
[ 24.972880] Allocate Port Service[0000:00: 02.0:pcie00]
[ 24.972908] Allocate Port Service[0000:00:02.0:pcie02]
[ 24.973014] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 24.973063] assign_interrupt_mode Found MSI capability
[ 24.973065 ] Allocate Port Service[0000:00:03.0:pcie00]
[ 24.973093] Allocate Port Service[0000:00:03.0:pcie02]
[ 24.973212] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 24.973253] assign_interrupt_mode Found MSI capability
[ 24.973255] Allocate Port Service[0000:04:00.0:pcie00]
[ 24.973353] PCI: Setting latency timer of device 0000:04:00.1 to 64
[ 24.973393] assign_interrupt_mode Found MSI capability
[ 24.973395] Allocate Port Service[0000:04: 00.1:pcie00]
[ 24.992619] Real Time Clock Driver v1.12ac
[ 24.992684] Linux agpgart interface v0.102 (c) Dave Jones
[ 24.992686] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 24.992806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.992918] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 24.993410] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.993570] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 24.993746] mice: PS/2 mouse device common for all mice
[ 24.994280] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 24.994499] input: Macintosh mouse button emulation as /class/input/input0
[ 24.994529] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 24.994533] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 24.994812] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 24.994814] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 24.997498] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 24.997501] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 24.997620] TCP cubic registered
[ 24.997630] NET: Registered protocol family 1
[ 24.997739] ACPI: (supports S0 S3 S4 S5)
[ 24.997783] Magic number: 7:586:87
[ 24.997952] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 24.998046] Freeing unused kernel memory: 304k freed
[ 25.020907] input: AT Translated Set 2 keyboard as /class/input/input1
[ 26.137356] Capability LSM initialized
[ 26.166927] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 26.166976] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 26.166981] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 26.480781] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 26.480811] VP_IDE: chipset revision 7
[ 26.480813] VP_IDE: not 100% native mode: will probe irqs later
[ 26.480824] VP_IDE: VIA vt8251 (rev 00) IDE UDMA133 controller on pci0000:00: 0f.1
[ 26.480832] ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
[ 26.480840] Probing IDE interface ide0...
[ 26.492062] SCSI subsystem initialized
[ 26.495880] libata version 2.20 loaded.
[ 26.528537] usbcore: registered new interface driver usbfs
[ 26.528565] usbcore: registered new interface driver hub
[ 26.528589] usbcore: registered new device driver usb
[ 26.547234] USB Universal Host Controller Interface driver v3.0
[ 26.550711] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 26.559536] ieee1394: Initialized config rom entry `ip1394'
[ 26.590504] Floppy drive(s): fd0 is 1.44M
[ 26.611858 ] FDC 0 is a post-1991 82077
[ 27.349724] hda: HL-DT-ST DVDRAM GSA-H42L, ATAPI CD/DVD-ROM drive
[ 28.131703] hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
[ 28.193879] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 28.201568] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 28.201588] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 28.201753] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 28.201777] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e400
[ 28.201883] usb usb1: configuration #1 chosen from 1 choice
[ 28.201906] hub 1-0:1.0: USB hub found
[ 28.201911] hub 1-0:1.0: 2 ports detected
[ 28.210930] hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 28.210939] Uniform CD-ROM driver Revision: 3.20
[ 28.223296] hdb: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
[ 28.305676] ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 22
[ 28.305694] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 28.305723] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 28.305753] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000e000
[ 28.305845] usb usb2: configuration #1 chosen from 1 choice
[ 28.305868] hub 2-0:1.0: USB hub found
[ 28.305874] hub 2-0:1.0: 2 ports detected
[ 28.409968] ACPI: PCI Interrupt 0000:00:10.2
-> GSI 21 (level, low) -> IRQ 21
[ 28.409978] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 28.410007] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 28.410031] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000dc00
[ 28.410122] usb usb3: configuration #1 chosen from 1 choice
[ 28.410151] hub 3-0:1.0: USB hub found
[ 28.410158] hub 3-0:1.0: 2 ports detected
[ 28.515841] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 28.515850] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 28.515868] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 28.515890] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d800
[ 28.515968] usb usb4: configuration #1 chosen from 1 choice
[ 28.515987] hub 4-0:1.0: USB hub found
[ 28.515993] hub 4-0:1.0: 2 ports detected
[ 28.547109] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 28.620049] ACPI: PCI Interrupt 0000:07:0c.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 28.620163] ACPI: PCI Interrupt 0000:00: 12.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 28.624142] eth0: VIA Rhine II at 0x1d400, 00:19:db:5d:46:97, IRQ 23.
[ 28.624856] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 28.676142] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[df5fe000-df5fe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 28.681275] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 22
[ 28.681292] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 28.681328] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 28.681361] ehci_hcd 0000:00:10.4: debug port 1
[ 28.681372] ehci_hcd 0000:00: 10.4: irq 22, io mem 0xdfffe000
[ 28.681379] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.681468] usb usb5: configuration #1 chosen from 1 choice
[ 28.681493] hub 5-0:1.0: USB hub found
[ 28.681499] hub 5-0:1.0: 8 ports detected
[ 28.687618] usb 1-1: device descriptor read/all, error -71
[ 29.888914] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 29.957423] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000111ecd1]
[ 30.022255] usb 5-1: configuration #1 chosen from 1 choice
[ 30.022315] hub 5-1:1.0: USB hub found
[ 30.022465] hub 5-1:1.0: 4 ports detected
[ 30.513668] usb 5-1.1: new high speed USB device using ehci_hcd and address 4
[ 30.697570] usb 5-1.1: configuration #1 chosen from 1 choice
[ 30.900694] usb 5-1.2: new high speed USB device using ehci_hcd and address 5
[ 31.171208] usb 5-1.2: configuration #1 chosen from 1 choice
[ 31.368449] usb 5-1.3: new low speed USB device using ehci_hcd and address 6
[ 31.465632] usb 5-1.3: configuration #1 chosen from 1 choice
[ 31.466222] usbcore: registered new interface driver libusual
[ 31.468871] Initializing USB Mass Storage driver...
[ 31.707266] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 31.888695] usb 4-2: configuration #1 chosen from 1 choice
[ 31.891974] scsi0 : SCSI emulation for USB Mass Storage devices
[ 31.892017] usb-storage: device found at 4
[ 31.892019] usb-storage: waiting for device to settle before scanning
[ 31.892035] usbcore: registered new interface driver usb-storage
[ 31.892037] USB Mass Storage support registered.
[ 31.898520] usbcore: registered new interface driver hiddev
[ 31.910832] input: Microsoft Basic Optical Mouse as /class/input/input2
[ 31.910954] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00: 10.3-2
[ 31.910964] usbcore: registered new interface driver usbhid
[ 31.910966] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 36.892939] usb-storage: device scan complete
[ 36.897058] scsi 0:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI: 0
[ 36.900297] scsi 0:0:0:1: Direct-Access Generic Flash HS-MS/SD 4.44 PQ: 0 ANSI: 0
[ 36.903545] scsi 0:0:0:2: Direct-Access Generic Flash HS-SM 4.44 PQ: 0 ANSI: 0
[ 36.914102 ] sd 0:0:0:0: Attached scsi removable disk sda
[ 36.964934] sd 0:0:0:1: Attached scsi removable disk sdb
[ 36.969175] sd 0:0:0:2: Attached scsi removable disk sdc
[ 36.972397] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 36.972521] sd 0:0:0:1: Attached scsi generic sg1 type 0
[ 36.972638] sd 0:0:0:2: Attached scsi generic sg2 type 0
[ 39.821717] end_request: I/O error, dev fd0, sector 0
[ 52.028098] end_request: I/O error, dev fd0, sector 0
[ 52.028102] Buffer I/O error on device fd0, logical block 0
[ 64.246203] end_request: I/O error, dev fd0, sector 0
[ 64.246206] Buffer I/O error on device fd0, logical block 0
[ 77.465019] end_request: I/O error, dev fd0, sector 0
[ 89.671675] end_request: I/O error, dev fd0, sector 0
[ 89.671679] Buffer I/O error on device fd0, logical block 0
[ 101.873711] end_request: I/O error, dev fd0, sector 0
[ 101.873715] Buffer I/O error on device fd0, logical block 0
[ 102.518288] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 102.548531] ISO 9660 Extensions: RRIP_1991A
[ 102.591719] Registering unionfs 20060916-2203
[ 102.591723] unionfs: debugging is not enabled
[ 102.601712] loop: loaded (max 8 devices)
[ 102.753333] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 165.781496] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 166.702634] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 166.720057] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 167.093233] agpgart: Detected VIA P4M890 chipset
[ 167.099327] agpgart: AGP aperture is 128M @ 0xd0000000
[ 169.011967] input: PC Speaker as /class/input/input3
[ 169.396037] NET: Registered protocol family 17
[ 169.775676] Linux video capture interface: v2.00
[ 170.585376] parport: PnPBIOS parport detected.
[ 170.585429] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 170.772422] input: X10 WTI RF receiver as /class/input/input4
[ 170.772546] usbcore: registered new interface driver ati_remote
[ 170.772551] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
[ 170.780326] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[ 171.310474] Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com .
[ 171.316533] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 171.316614] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 171.316621] saa7133[0]: found at 0000:07:09.0, rev: 209, irq: 16, latency: 32, mmio: 0xdf5ff000
[ 171.316627] saa7133[0]: subsystem: 16be:0010, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 171.316634] saa7133[0]: board init: gpio is 0
[ 171.449449] saa7133[0]: i2c eeprom 00: be 16 10 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 171.449460] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
[ 171.449468] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2c 02 51 96 2b
[ 171.449477] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
[ 171.449495] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 22 15 00 fd 79 44 9f c2 8f
[ 171.449501] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 171.449507] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 171.449514] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 171.449758] saa7133[0]: registered device video0 [v4l2]
[ 171.449783] saa7133[0]: registered device vbi0
[ 171.926943 ] Loading module: rt73usb - CVS (N/A) by http://rt2x00.serialmonkey.com.
[ 172.095925] saa7134 ALSA driver for DMA sound loaded
[ 172.095954] saa7133[0]/alsa: saa7133[0] at 0xdf5ff000 irq 16 registered as card -2
[ 172.235986] usbcore: registered new interface driver rt73usb
[ 173.289947] usbcore: registered new interface driver rt2570
[ 173.307260] ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 173.307283] PCI: Setting latency timer of device 0000:04:01.0 to 64
[ 173.308577] wmaster0: Selected rate control algorithm 'simple'
[ 173.515011] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 175.191471] NET: Registered protocol family 10
[ 175.191638] lo: Disabled Privacy Extensions
[ 175.438808] fuse init (API version 7.8)
[ 182.691330] input: Power Button (FF) as /class/input/input5
[ 182.691359] ACPI: Power Button (FF) [PWRF]
[ 182.691394] input: Power Button (CM) as /class/input/input6
[ 182.691407] ACPI: Power Button (CM) [PWRB]
[ 182.691433] input: Sleep Button (CM) as /class/input/input7
[ 182.691449] ACPI: Sleep Button (CM) [SLPB]
[ 182.746042] No dock devices found.
[ 182.759981] Using specific hotkey driver
[ 182.805760] ibm_acpi: ec object not found
[ 183.024143] pcc_acpi: loading...
[ 185.359915] wlan0: no IPv6 routers present
[ 186.150000] eth0: no IPv6 routers present
[ 191.570268] wlan0: starting scan
[ 192.549904] wlan0: scan completed
[ 201.226980] lp0: using parport0 (interrupt-driven).
[ 201.261413] ppdev: user-space parallel port driver
[ 211.926889] eth0: no IPv6 routers present
[ 216.663903] Bluetooth: Core ver 2.11
[ 216.664001] NET: Registered protocol family 31
[ 216.664004] Bluetooth: HCI device and connection manager initialized
[ 216.664007] Bluetooth: HCI socket layer initialized
[ 216.698405] Bluetooth: L2CAP ver 2.8
[ 216.698410] Bluetooth: L2CAP socket layer initialized
[ 218.333812] Bluetooth: RFCOMM socket layer initialized
[ 218.333831] Bluetooth: RFCOMM TTY layer initialized
[ 218.333833] Bluetooth: RFCOMM ver 1.8
[ 227.587898] wlan0: starting scan
[ 228.583398] wlan0: scan completed
[ 229.515396] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 248.678186] wlan0: starting scan
[ 249.633702] wlan0: scan completed
[ 269.661672] wlan0: starting scan
[ 270.577186] wlan0: scan completed
[ 290.642864] wlan0: starting scan
[ 291.598385] wlan0: scan completed
[ 311.622332] wlan0: starting scan
[ 312.541867] wlan0: scan completed
[ 332.603891] wlan0: starting scan
[ 333.559414] wlan0: scan completed
[ 353.583355] wlan0: starting scan
[ 354.534878] wlan0: scan completed
Output lspci
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:00.5 PIC: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Controller
00:00.6 Host bridge: VIA Technologies, Inc. P4M890 Security Device
00:00.7 Host bridge: VIA Technologies, Inc. P4M890 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:03.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
00:0f.0 IDE interface: VIA Technologies, Inc. Unknown device 5287 (rev 20)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 07)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 91)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 90)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8251 PCI to ISA Bridge
00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)
00:13.0 PCI bridge: VIA Technologies, Inc. VT8251 Host Bridge
00:13.1 PCI bridge: VIA Technologies, Inc. VT8251 PCI to PCI Bridge
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 0390 (rev a1)
04:00.0 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
04:00.1 PCI bridge: VIA Technologies, Inc. VT8251 PCIE Root Port
04:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio Controller
07:09.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
07:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)
Nogmaals bedankt!